view Side-By-Side changes
HTTP Working Group R. Fielding
INTERNET-DRAFT Fielding, UC Irvine
<draft-ietf-http-v11-spec-rev-00.txt>
INTERNET-DRAFT J. Gettys Gettys, Digital
<draft-ietf-http-v11-spec-rev-01> J. C. Mogul
DEC Mogul, Digital
L. Masinter, Xerox
P. Leach, Microsoft
H. Frystyk Frystyk, MIT/LCS
T. Berners-Lee Berners-Lee, MIT/LCS
Expires January 30, May 21, 1998 July 30, November 21, 1997
Hypertext Transfer Protocol -- HTTP/1.1
Status of this Memo
This document is an Internet-Draft. Internet-Drafts are working
documents of the Internet Engineering Task Force (IETF), its areas, and
its working groups. Note that other groups may also distribute working
documents as Internet-
Drafts. Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or made obsolete by other documents at any
time. It is inappropriate to use Internet-Drafts as reference material
or to cite them other than as "work in progress".
To learn the current status of any Internet-Draft, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe),
munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or
ftp.isi.edu (US West Coast).
Distribution of this document is unlimited. Please send comments to the
HTTP working group at <http-
wg@cuckoo.hpl.hp.com>. <http-wg@cuckoo.hpl.hp.com>. Discussions of the
working group are archived at
<URL:http://www.ics.uci.edu/pub/ietf/http/>. General discussions about
HTTP and the applications which use HTTP should take place on the <www-talk@w3.org> <www-
talk@w3.org> mailing list.
Abstract
The Hypertext Transfer Protocol (HTTP) is an application-
level application-level protocol
for distributed, collaborative, hypermedia information systems. It is a
generic, stateless, object-
oriented object-oriented protocol which can be used for many
tasks, such as name servers and distributed object management systems,
through extension of its request methods. A feature of HTTP is the
typing and negotiation of data representation, allowing systems to be
built independently of the data being transferred.
Fielding, et al [Page 1]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
HTTP has been in use by the World-Wide Web global information initiative
since 1990. This specification defines the protocol referred to as
"HTTP/1.1".
The issues list for HTTP/1.1 can be found at:
http://www.w3.org/Protocols/HTTP/Issues/.
Fielding, et al [Page 1]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
This draft does not resolve all open issues in the HTTP/1.1
specification requiring closure before HTTP/1.1 goes to draft standard.
It does, however, close most of them, and note where in the document
there are still significant issues under discussion. The best way to
view this document is to get a copy of the Word 97 document found at:
http://www.w3.org/Protocols/HTTP/1.1/diff-v11-
RFC2068to08.doc;
http://www.w3.org/Protocols/HTTP/1.1/draft-ietf-http-v11-spec-rev-
01.doc; all issues are noted as comments in the source document, with
hyperlinks to the Issues list.
This document has had the basic ambiguity problems with OPTIONS
resolved; but does not solve the underlying issue of identifying
extensions to HTTP. The most significant outstanding issue OPTIONS is OPTIONS; therefore still open; at
Munich, there was strong sentiment to some sort of OPTIONS facility, but
we've not been able to converge; it is
a separate internet draft on the topic that you should
review NOT incorporated into this draft (though editorial
notes identify where changes may occur). This draft is
draft-ietf-http-options-00.txt.
Also an issue: AGE-CALCULATION; Roy Fielding has issued an
ID on the topic; Jeff Mogul intends to issue a draft as
well.
The editorial group agenda for Washington.
See draft-ietf-http-options-02.txt for details.
Summary Of Issues since Rev-01 (Rev-01 and Auth-00 under preparation)
4 Open Technical issues: RE-AUTHENTICATION-REQUESTED, PROXY-REDIRECT,
CONTENT-ENCODING, OPTIONS.
Minimal OPTIONS is very interested in feedback on the
sample table of requirements Rev-01, PROXY-REDIRECT proposal that was in this Rev-00
draft (issue
REQUIREMENTS, section 1.9). Is it useful? How could it be
improved? (which interacts with OPTIONS) was removed from rev-01.
8 Open or drafting Editorial issues: XREFS, REQUEST_TARGET, UPDATE_ACKS,
DISPOSITION, REQUIREMENTS, CLEAN_INDEXES, CODE_REGISTRY,
IANA_DIRECTIONS.
4 Ready for Last Call: PUT-RANGE, RE-AUTHENTICATION-REQUESTED,
TRAILER_FIELDS, RANGE_WITH_CONTENTCODING.
12 Last call issues not incorporated (all edited into this draft
include: REDIRECTS, ENCODING-NOT-CONNEG, DATE_IF_MODIFIED,
403VS404, PUT-RANGE, Rev-01): DIGEST_SYNTAX,
PROTECTION_SPACE, CONTRADICTION, IMS_INM_MISMATCH, CONNECTION_METHOD,
BYTERANGE_SYNTAX, RE-VERSION, HOST, AGE-CALCULATION, RE-
AUTHENTICATION-REQUESTED, VARY
Issues incorporated into this draft where there is still
controversy are noted in bold italic with an editor's note.
These are issues: CONTENT-ENCODING, CACHING-CGI.
Issues incorporated into this draft being working group last
called are: AUTH-CHUNKED, RETRY-AFTER, PROXY-REDIRECT
Closed issues incorporated REQUIRE-DIGEST,
DOCKDIGEST, GENERIC_MESSAGE.
9 Technical Issues closed since Rev-00 (all edited into this draft include: PROXY-
AUTHORIZATION, PROXY-LENGTH, LANGUAGE-TAG, TSPECIALS,
STATUS100, QZERO, RANGE-ERROR, CLARIFY-NO-CACHE, COMMENT,
CONTENT-LOCATION, QUOTED-BACK, CACHE-CONTRA, CACHE-
DIRECTIVE, BYTE-RANGE, LWS-DELIMITER, CRLF, MAX-AGE,
100DATE, DISPOSITION, CHUNKED, CACHING, Rev-01): 301-
302, REDIRECTS, CACHING-CGI, WARNINGS, VERSION,
PROXY-MAXAGE, CHARSET-WILDCARD, PADDING, CONNECTION, RANGES,
WARNING-8859, SHOULD-8859, X-BYTERANGES, MULTIPLE-TRANSFER-
CODINGS, LINK_HEADER.
Fielding, et al [Page 2]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Editorial issues still open include: CLEANUP, UTF-8, URL-
SYNTAX, ENTITY, DOCKDIGEST, 1310_CACHE. DATE-IF-MODIFIED, 403VS404, AGE-
CALCULATION (Yeah!), VARY, RANGE-ERROR.
12 Editorial issues closed include: ACCEPT-RANGES, KEEP-ALIVE,
BNFNAME, KEYWORDS, RESPONSE-VERSION, XREF, COMMON-HEADERS,
NO-CACHE, FIX-REF, PERSIST-CONFUSED, CONNECTION2, GMT-UTC,
PROXY-FORWARD, REFERER-SEC, CHUNK-EXT, since Rev-00 (all edited into Rev-01):
REMOVE_19.6,
IDEMPOTENT, REF-SIGCOMM, 1521-OBSOLETE, MESSAGE-BODY
Apologies for the extreme length; Microsoft Word exhibited a
fatal bug whenever trying to adjust margins when converting to
ascii text; therefore, the margins are extreme and the document
very long in ascii. Get the Postscript version off the Issues
list! GENERIC_MESSAGE, RANGE_OPTIONAL, EBNF, CODES, UTF-8,
DOCKDIGEST, URL-SYNTAX, 1310_CACHE, MESSAGE-BODY, LENGTH_WORDING,
CLEANUP.
Fielding, et al [Page 3] 2]
Table of Contents
HYPERTEXT TRANSFER PROTOCOL -- HTTP/1.1 ...................1 HTTP/1.1....................1
Status of this Memo .......................................1
Abstract ..................................................1 Memo........................................1
Abstract...................................................1
Table of Contents .........................................5 Contents..........................................3
1 Introduction .........................................11 ..........................................8
1.1 Purpose ...........................................11 .............................................8
1.2 Requirements ......................................11 ........................................9
1.3 Terminology .......................................12 ........................................10
1.4 Overall Operation .................................15 ..................................13
2 Notational Conventions and Generic Grammar ...........17 ...........14
2.1 Augmented BNF .....................................17 ......................................14
2.2 Basic Rules .......................................19 ........................................16
3 Protocol Parameters ..................................20 ..................................17
3.1 HTTP Version ......................................20 .......................................17
3.2 Uniform Resource Identifiers ......................22 .......................19
3.2.1 General Syntax .................................22 ..................................19
3.2.2 http URL .......................................23 ........................................19
3.2.3 URI Comparison .................................24
3.3 ..................................20
1.3 Date/Time Formats .................................24
3.3.1 ..................................20
1.3.1 Full Date ......................................24
3.3.2 .......................................20
1.3.2 Delta Seconds ..................................25
3.4 ...................................21
1.4 Character Sets ....................................25
3.5 .....................................21
1.5 Content Codings ...................................26
3.6 ....................................22
1.6 Transfer Codings ..................................27
3.7 ...................................23
1.6.1 Chunked Transfer Coding .........................24
1.6.2 Identity Transfer Coding ........................25
1.7 Media Types .......................................29
3.7.1 ........................................25
1.7.1 Canonicalization and Text Defaults .............30
3.7.2 ..............26
1.7.2 Multipart Types ................................31
3.8 .................................26
1.8 Product Tokens ....................................31
3.9 .....................................27
1.9 Quality Values ....................................32
3.10 .....................................27
1.10 Language Tags .....................................32
3.11 ......................................28
1.11 Entity Tags .......................................33
3.12 ........................................28
1.12 Range Units .......................................33 ........................................29
4 HTTP Message .........................................34 .........................................29
4.1 Message Types .....................................34 ......................................29
4.2 Message Headers ...................................34 ....................................30
4.3 Message Body ......................................35 .......................................30
4.4 Message Length ....................................36 .....................................31
4.5 General Header Fields .............................37 ..............................32
Fielding, et al [Page 3]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
5 Request ..............................................38 ..............................................33
5.1 Request-Line ......................................38 .......................................33
5.1.1 Method .........................................38 ..........................................33
5.1.2 Request-URI ....................................39
Fielding, et al [Page 5]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 .....................................34
5.2 The Resource Identified by a Request ..............41 ...............35
5.3 Request Header Fields .............................41 ..............................35
6 Response .............................................42 .............................................36
6.1 Status-Line .......................................43 ........................................36
6.1.1 Status Code and Reason Phrase ..................43
6.2 ...................36
1.2 Response Header Fields ............................45 .............................38
7 Entity ...............................................45 ...............................................39
7.1 Entity Header Fields ..............................46 ...............................39
7.2 Entity Body .......................................46 ........................................39
7.2.1 Type ...........................................47 ............................................40
7.2.2 Length .........................................47 ..........................................40
8 Connections ..........................................47 ..........................................40
8.1 Persistent Connections ............................47 .............................40
8.1.1 Purpose ........................................47
8.1.2 .........................................40
1.1.2 Overall Operation ..............................48
8.1.3 ...............................41
1.1.3 Proxy Servers ..................................49
8.1.4 ...................................42
1.1.4 Practical Considerations .......................50
8.2 ........................43
1.2 Message Transmission Requirements .................51 ..................44
1.2.1 Persistent connections and flow control .........44
1.2.2 Monitoring connections for error status messages 44
1.2.3 Automatic retrying of requests ..................44
1.2.4 Use of the 100 (Continue) status ................44
1.2.5 Client behavior if server prematurely closes connection
.................................................46
9 Method Definitions ...................................54 ...................................47
9.1 Safe and Idempotent Methods .......................55 ........................47
9.1.1 Safe Methods ...................................55 ....................................47
9.1.2 Idempotent Methods .............................55 ..............................48
9.2 OPTIONS ...........................................56 ............................................48
9.3 GET ...............................................56 ................................................49
9.4 HEAD ..............................................57 ...............................................50
9.5 POST ..............................................57
9.6 ...............................................50
1.6 PUT ...............................................58
9.7 ................................................51
1.6.1 Partial PUT (PUT with Content-Range) ............52
1.7 DELETE ............................................59
9.8 .............................................53
1.8 TRACE .............................................60 ..............................................53
1.9 CONNECT ............................................54
10 Status Code Definitions ............................60 .............................54
10.1 Informational 1xx .................................61 ..................................54
10.1.1 100 Continue ...................................61 ....................................54
10.1.2 101 Switching Protocols ........................61 .........................54
10.2 Successful 2xx ....................................62 .....................................55
Fielding, et al [Page 4]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.2.1 200 OK .........................................62 ..........................................55
10.2.2 201 Created ....................................62 .....................................55
10.2.3 202 Accepted ...................................62 ....................................55
10.2.4 203 Non-Authoritative Information ..............63 ...............56
10.2.5 204 No Content .................................63 ..................................56
10.2.6 205 Reset Content ..............................63 ...............................56
10.2.7 206 Partial Content ............................63 .............................57
10.2.8 207 Partial Update OK ...........................57
10.3 Redirection 3xx ...................................64 ....................................58
10.3.1 300 Multiple Choices ...........................64 ............................58
10.3.2 301 Moved Permanently ..........................65 ...........................58
10.3.3 302 Moved Temporarily ..........................65 Found .......................................59
10.3.4 303 See Other ..................................66 ...................................59
10.3.5 304 Not Modified ...............................66 ................................60
10.3.6 305 Use Proxy ..................................67 ...................................61
10.3.7 307 Temporary Redirect ..........................61
10.4 Client Error 4xx ..................................68
Fielding, et al [Page 6]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 ...................................61
10.4.1 400 Bad Request ................................68 .................................62
10.4.2 401 Unauthorized ...............................68 ................................62
10.4.3 402 Payment Required ...........................69 ............................62
10.4.4 403 Forbidden ..................................69 ...................................62
10.4.5 404 Not Found ..................................69 ...................................62
10.4.6 405 Method Not Allowed .........................69 ..........................63
10.4.7 406 Not Acceptable .............................69 ..............................63
10.4.8 407 Proxy Authentication Required ..............70 ...............63
10.4.9 408 Request Timeout ............................70 .............................63
10.4.10 ...............................409 ......................................409 Conflict 70 64
10.4.11 ...................................410 ..........................................410 Gone 71 64
10.4.12 ........................411 ...............................411 Length Required 71 64
10.4.13 ....................412 ...........................412 Precondition Failed 71 65
10.4.14 ...............413 ......................413 Request Entity Too Large 71 65
10.4.15 ...................414 ..........................414 Request-URI Too Long 72 65
10.4.16 .................415 ........................415 Unsupported Media Type 72 65
10.4.17 ...............416 Requested range not satisfiable 65
10.4.18 ............................417 Expectation Failed 66
10.4.19 .....................418 Reauthentication Required 66
10.4.20 ...............419 Proxy Reauthentication Required 66
10.5 Server Error 5xx ..................................73 ...................................67
10.5.1 500 Internal Server Error ......................73 .......................67
10.5.2 501 Not Implemented ............................73 .............................67
10.5.3 502 Bad Gateway ................................73 .................................67
10.5.4 503 Service Unavailable ........................73 .........................67
10.5.5 504 Gateway Timeout ............................73 .............................67
10.5.6 505 HTTP Version Not Supported .................74 ..................68
10.5.7 506 Partial Update Not Implemented ..............68
11 Access Authentication ..............................74 ...............................68
11.1 Basic Authentication Scheme .......................76
11.2 Digest Authentication Scheme ......................77 ..............................68
12 Content Negotiation ................................77 .................................68
12.1 Server-driven Negotiation .........................78 ..........................69
Fielding, et al [Page 5]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
12.2 Agent-driven Negotiation ..........................79 ...........................70
12.3 Transparent Negotiation ...........................79 ............................70
13 Caching in HTTP ....................................80
13.1.1 .....................................71
1.1.1 Cache Correctness ..............................81
13.1.2 ...............................72
1.1.2 Warnings .......................................82
13.1.3 ........................................73
1.1.3 Cache-control Mechanisms .......................83
13.1.4 ........................74
1.1.4 Explicit User Agent Warnings ...................84
13.1.5 ....................74
1.1.5 Exceptions to the Rules and Warnings ...........84
13.1.6 ............75
1.1.6 Client-controlled Behavior .....................85
13.2 ......................75
1.2 Expiration Model ..................................85
13.2.1 ...................................76
1.2.1 Server-Specified Expiration ....................85
13.2.2 .....................76
1.2.2 Heuristic Expiration ...........................86
13.2.3 ............................76
1.2.3 Age Calculations ...............................86
13.2.4 ................................77
1.2.4 Expiration Calculations ........................89
13.2.5 .........................79
1.2.5 Disambiguating Expiration Values ...............90
13.2.6 ................79
1.2.6 Disambiguating Multiple Responses ..............90
13.3 ...............80
1.3 Validation Model ..................................91
13.3.1 ...................................80
1.3.1 Last-modified Dates ............................92
13.3.2 .............................81
1.3.2 Entity Tag Cache Validators ....................92
13.3.3 .....................82
1.3.3 Weak and Strong Validators .....................92
13.3.4 ......................82
1.1.4 Rules for When to Use Entity Tags and Last-
modified Last-modified Dates ........................................95
13.3.5
.................................................84
1.1.5 Non-validating Conditionals ....................96
Fielding, et al [Page 7]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
13.4 .....................86
1.4 Response Cachability ..............................96
13.5 ...............................86
1.5 Constructing Responses From Caches ................97
13.5.1 .................87
1.5.1 End-to-end and Hop-by-hop Headers ..............97
13.5.2 ...............87
1.1.2 Non-modifiable Headers .........................98
13.5.3 ..........................87
1.1.3 Combining Headers ..............................99
13.5.4 ...............................88
1.1.4 Combining Byte Ranges .........................100
13.6 ...........................89
1.6 Caching Negotiated Responses .....................101
13.7 .......................90
1.7 Shared and Non-Shared Caches .....................102
13.8 .......................91
1.8 Errors or Incomplete Response Cache Behavior .....102
13.9 .......91
1.9 Side Effects of GET and HEAD .....................102
13.10 .......................91
1.10 Invalidation After Updates or Deletions .........103
13.11 ............92
1.11 Write-Through Mandatory .........................103
13.12 ............................92
1.12 Cache Replacement ...............................104
13.13 ..................................93
1.13 History Lists ...................................104 ......................................93
14 Header Field Definitions ..........................105 ............................94
14.1 Accept ...........................................105 .............................................94
14.2 Accept-Charset ...................................107 .....................................96
14.3 Accept-Encoding ..................................108 ....................................96
14.4 Accept-Language ..................................109 ....................................97
14.5 Accept-Ranges ....................................110 ......................................99
14.6 Age ..............................................111 ................................................99
14.7 Allow ............................................111 ..............................................99
14.8 Authorization ....................................112 .....................................100
14.9 Cache-Control ....................................113
14.9.1 .....................................101
1.1.1 What is Cachable ..............................114
14.9.2 ...............................102
1.1.2 What May be Stored by Caches ..................115
14.9.3 ...................103
Fielding, et al [Page 6]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
1.1.3 Modifications of the Basic Expiration Mechanism116
14.9.4 Mechanism 103
1.1.4 Cache Revalidation and Reload Controls ........118
14.9.5 .........105
1.1.5 No-Transform Directive ........................120
14.9.6 .........................107
1.1.6 Cache Control Extensions ......................121
14.10 .......................108
1.10 Connection ......................................122
14.11 ........................................109
1.11 Content-Base ....................................123
14.12 ......................................110
1.12 Content-Encoding ................................123
14.13 ..................................110
1.13 Content-Language ................................124
14.14 ..................................111
1.14 Content-Length ..................................125
14.15 ....................................111
1.15 Content-Location ................................125
14.16 ..................................112
1.16 Content-MD5 .....................................126
14.17 .......................................113
1.17 Content-Range ...................................127
14.18 .....................................114
1.18 Content-Type ....................................129
14.19 ......................................116
1.19 Date ............................................130
14.20 ..............................................116
1.19.1 Clockless Origin Server Operation ..............117
1.20 ETag ............................................131
14.21 ..............................................117
1.21 Expires .........................................131
14.22 ...........................................117
1.22 From ............................................132
14.23 ..............................................118
1.23 Host ............................................133
14.24 ..............................................119
1.24 If-Modified-Since ...............................134
14.25 .................................119
1.25 If-Match ........................................135
14.26 ..........................................121
1.26 If-None-Match ...................................136
14.27 .....................................122
1.27 If-Range ........................................137
14.28 ..........................................123
1.28 If-Unmodified-Since .............................138
14.29 ...............................123
1.29 Last-Modified ...................................138
14.30 .....................................124
1.30 Location ........................................139
14.31 ..........................................124
1.31 Max-Forwards ....................................140
14.32 ......................................125
1.32 Pragma ..........................................140
Fielding, et al [Page 8]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
14.33 ............................................125
1.33 Proxy-Authenticate ..............................141
14.34 ................................126
1.34 Proxy-Authorization .............................142
14.35 ...............................126
1.35 Public ..........................................142
14.36 ............................................127
1.36 Range ...........................................143
14.36.1 ...............................Byte .............................................127
1.36.1 Byte Ranges 143
14.36.2 ..................Range ....................................127
1.1.2 Range Retrieval Requests 144
14.37 .......................128
1.37 Referer .........................................145
14.38 ...........................................129
1.38 Retry-After .....................................145
14.39 .......................................130
1.39 Server ..........................................146
14.40 ............................................130
1.40 Transfer-Encoding ...............................146
14.41 .................................130
1.41 Upgrade .........................................147
14.42 ...........................................131
1.42 User-Agent ......................................148
14.43 ........................................132
1.43 Vary ............................................148
14.44 ..............................................132
1.44 Via .............................................150
14.45 ...............................................133
1.45 Warning .........................................151
14.46 ...........................................134
1.46 WWW-Authenticate ................................154 ..................................137
1.47 Expect ............................................137
1.47.1 Expect 100-continue ............................137
1.48 TE ................................................138
1.49 Trailer ...........................................139
15 Security Considerations ...........................157 ............................139
15.1 Authentication of Clients ........................157 .........................140
Fielding, et al [Page 7]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
15.2 Offering a Choice of Authentication Schemes ......159
15.3 Abuse of Server Log Information ..................159
15.4 ...................141
15.3 Transfer of Sensitive Information ................160
15.5 .................141
15.4 Attacks Based On File and Path Names .............160
15.6 ..............142
15.5 Personal Information .............................161
15.7 ..............................142
15.6 Privacy Issues Connected to Accept Headers .......161
15.8 ........142
15.7 DNS Spoofing .....................................162
15.9 ......................................143
15.8 Location Headers and Spoofing ....................163 .....................144
15.9 Content-Disposition Issues ........................144
15.10 Encoding Sensitive Information in URL's .........144
15.11 Authetication Credentials and Idle Clients ......144
16 Acknowledgments ...................................165 ....................................145
17 References ........................................166 .........................................146
18 Authors' Addresses ................................170 .................................150
19 Appendices ........................................171 .........................................151
19.1 Internet Media Type message/http .................171 ..................151
19.2 Internet Media Type multipart/byteranges .........172 ..........152
19.3 Tolerant Applications ............................173
19.4 .............................152
1.4 Differences Between HTTP Entities and RFC 2045 Entities ...............................................173
19.4.1 153
1.4.1 Conversion to Canonical Form ..................174
19.4.2 ...................153
1.4.2 Conversion of Date Formats ....................174
19.4.3 .....................154
1.4.3 Introduction of Content-Encoding ..............175
19.4.4 ...............154
1.4.4 No Content-Transfer-Encoding ..................175
19.4.5 ...................154
1.4.5 HTTP Header Fields in Multipart Body-Parts ....175
19.4.6 .....155
1.4.6 Introduction of Transfer-Encoding .............175
19.4.7 ..............155
1.4.7 MIME-Version ..................................176
19.5 ...................................155
1.5 Changes from HTTP/1.0 ............................176
19.5.1 .............................156
1.5.1 Changes to Simplify Multi-homed Web Servers and Conserve IP
Addresses ................................176
19.6 .............................................156
1.6 Additional Features ..............................177
19.6.1 Additional Request Methods ....................178
19.6.2 Additional Header Field Definitions ...........178
19.7 ...............................156
1.1.1 Content-Disposition ............................157
1.7 Compatibility with Previous Versions .............178
Fielding, et al [Page 9]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
19.7.1 ..............157
1.1.1 Compatibility with HTTP/1.0 Persistent Connections179
Fielding, et al [Page 10] Connections158
1.8 Backward Compatibility ............................158
1.8.1 CRLF's in Quoted Strings .......................159
1.8.2 Missing Content Type ...........................159
1.8.3 Multipart/x-byteranges .........................159
20 Index ..............................................160
1 Introduction
1.1 Purpose
The Hypertext Transfer Protocol (HTTP) is an application-
level application-level protocol
for distributed, collaborative, hypermedia information systems. HTTP has
been in use by the World-Wide Web global information initiative since
Fielding, et al [Page 8]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
1990. The first version of HTTP, referred to as HTTP/0.9, was a simple
protocol for raw data transfer across the Internet. HTTP/1.0, as defined
by RFC 1945 [6], improved the protocol by allowing messages to be in the
format of MIME-like messages, containing metainformation about the data
transferred and modifiers on the request/response semantics. However,
HTTP/1.0 does not sufficiently take into consideration the effects of
hierarchical proxies, caching, the need for persistent connections, and
virtual hosts. In addition, the proliferation of incompletely-implemented incompletely-
implemented applications calling themselves "HTTP/1.0" has necessitated
a protocol version change in order for two communicating applications to
determine each other's true capabilities.
This specification defines the protocol referred to as "HTTP/1.1". This
protocol includes more stringent requirements than HTTP/1.0 in order to
ensure reliable implementation of its features.
Practical information systems require more functionality than simple
retrieval, including search, front-end update, and annotation. HTTP
allows an open-ended set of methods that indicate the purpose of a
request. It builds on the discipline of reference provided by the
Uniform Resource Identifier (URI) [3], as a location (URL) [4] or name
(URN) [20], for indicating the resource to which a method is to be
applied. Messages are passed in a format similar to that used by
Internet mail [9] as defined by the Multipurpose Internet Mail
Extensions (MIME) [7].
HTTP is also used as a generic protocol for communication between user
agents and proxies/gateways to other Internet systems, including those
supported by the SMTP [16], NNTP [13], FTP [18], Gopher [2], and WAIS
[10] protocols. In this way, HTTP allows basic hypermedia access to
resources available from diverse applications.
1.2 Requirements
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in
this document are to be interpreted as described in RFC 2119 [34].
Fielding, et al [Page 11]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
An implementation is not compliant if it fails to satisfy one or more of
the MUST requirements for the protocols it implements. An implementation
that satisfies all the MUST and all the SHOULD requirements for its
protocols is said to be "unconditionally compliant"; one that satisfies
all the MUST requirements but not all the SHOULD requirements for its
protocols is said to be "conditionally compliant."
Fielding, et al [Page 9]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
1.3 Terminology
This specification uses a number of terms to refer to the roles played
by participants in, and objects of, the HTTP communication.
connection
A transport layer virtual circuit established between two programs
for the purpose of communication.
message
The basic unit of HTTP communication, consisting of a structured
sequence of octets matching the syntax defined in section 4 and
transmitted via the connection.
request
An HTTP request message, as defined in section 5.
response
An HTTP response message, as defined in section 6.
resource
A network data object or service that can be identified by a URI, as
defined in section 3.2. Resources may be available in multiple
representations (e.g. multiple languages, data formats, size,
resolutions) or vary in other ways.
entity
The information transferred as the payload of a request or response.
An entity consists of metainformation in the form of entity-header
fields and content in the form of an entity-body, as described in
section 7.
representation
An entity included with a response that is subject to content
negotiation, as described in section 12. There may exist multiple
representations associated with a particular response status.
content negotiation
The mechanism for selecting the appropriate representation when
servicing a request, as described in section 12. The representation
of entities in any response can be negotiated (including error
responses).
Fielding, et al [Page 12]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
variant
A resource may have one, or more than one, representation(s)
associated with it at any given instant. Each of these
representations is termed a `variant.' Use of the term `variant' does
not necessarily imply that the resource is subject to content
negotiation.
Fielding, et al [Page 10]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
client
A program that establishes connections for the purpose of sending
requests.
user agent
The client which initiates a request. These are often browsers,
editors, spiders (web-traversing robots), or other end user tools.
server
An application program that accepts connections in order to service
requests by sending back responses. Any given program may be capable
of being both a client and a server; our use of these terms refers
only to the role being performed by the program for a particular
connection, rather than to the program's capabilities in general.
Likewise, any server may act as an origin server, proxy, gateway, or
tunnel, switching behavior based on the nature of each request.
origin server
The server on which a given resource resides or is to be created.
proxy
An intermediary program which acts as both a server and a client for
the purpose of making requests on behalf of other clients. Requests
are serviced internally or by passing them on, with possible
translation, to other servers. A proxy must implement both the client
and server requirements of this specification.
gateway
A server which acts as an intermediary for some other server. Unlike
a proxy, a gateway receives requests as if it were the origin server
for the requested resource; the requesting client may not be aware
that it is communicating with a gateway.
tunnel
An intermediary program which is acting as a blind relay between two
connections. Once active, a tunnel is not considered a party to the
HTTP communication, though the tunnel may have been initiated by an
HTTP request. The tunnel ceases to exist when both ends of the
relayed connections are closed.
Fielding, et al [Page 13]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
cache
A program's local store of response messages and the subsystem that
controls its message storage, retrieval, and deletion. A cache stores
cachable responses in order to reduce the response time and network
bandwidth consumption on future, equivalent requests. Any client or
server may include a cache, though a cache cannot be used by a server
that is acting as a tunnel.
cachable
A response is cachable if a cache is allowed to store a copy of the
response message for use in answering subsequent requests. The rules
Fielding, et al [Page 11]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
for determining the cachability of HTTP responses are defined in
section 13. Even if a resource is cachable, there may be additional
constraints on whether a cache can use the cached copy for a
particular request.
first-hand
A response is first-hand if it comes directly and without unnecessary
delay from the origin server, perhaps via one or more proxies. A
response is also first-hand if its validity has just been checked
directly with the origin server.
explicit expiration time
The time at which the origin server intends that an entity should no
longer be returned by a cache without further validation.
heuristic expiration time
An expiration time assigned by a cache when no explicit expiration
time is available.
age
The age of a response is the time since it was sent by, or
successfully validated with, the origin server.
freshness lifetime
The length of time between the generation of a response and its
expiration time.
fresh
A response is fresh if its age has not yet exceeded its freshness
lifetime.
stale
A response is stale if its age has passed its freshness lifetime.
semantically transparent
A cache behaves in a "semantically transparent" manner, with respect
to a particular response, when its use affects neither the requesting
client nor the origin
Fielding, et al [Page 14]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 server, except to improve performance. When a
cache is semantically transparent, the client receives exactly the
same response (except for hop-by-hop headers) that it would have
received had its request been handled directly by the origin server.
validator
A protocol element (e.g., an entity tag or a Last-
Modified Last-Modified time) that
is used to find out whether a cache entry is an equivalent copy of an
entity.
Fielding, et al [Page 12]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
1.4 Overall Operation
The HTTP protocol is a request/response protocol. A client sends a
request to the server in the form of a request method, URI, and protocol
version, followed by a MIME-like message containing request modifiers,
client information, and possible body content over a connection with a
server. The server responds with a status line, including the message's
protocol version and a success or error code, followed by a MIME-like
message containing server information, entity metainformation, and
possible entity-
body entity-body content. The relationship between HTTP and MIME is
described in appendix 19.4.
Most HTTP communication is initiated by a user agent and consists of a
request to be applied to a resource on some origin server. In the
simplest case, this may be accomplished via a single connection (v)
between the user agent (UA) and the origin server (O).
request chain ------------------------>
UA -------------------v------------------- O
<----------------------- response chain
A more complicated situation occurs when one or more intermediaries are
present in the request/response chain. There are three common forms of
intermediary: proxy, gateway, and tunnel. A proxy is a forwarding agent,
receiving requests for a URI in its absolute form, rewriting all or part
of the message, and forwarding the reformatted request toward the server
identified by the URI. A gateway is a receiving agent, acting as a layer
above some other server(s) and, if necessary, translating the requests
to the underlying server's protocol. A tunnel acts as a relay point
between two connections without changing the messages; tunnels are used
when the communication needs to pass through an intermediary (such as a
firewall) even when the intermediary cannot understand the contents of
the messages.
request chain -------------------------------------->
UA -----v----- A -----v----- B -----v----- C -----v----- O
Fielding, et al [Page 15]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
<------------------------------------- response chain
The figure above shows three intermediaries (A, B, and C) between the
user agent and origin server. A request or response message that travels
the whole chain will pass through four separate connections. This
distinction is important because some HTTP communication options may
apply only to the connection with the nearest, non-tunnel neighbor, only
to the end-points of the chain, or to all connections along the chain.
Although the diagram is linear, each participant may be engaged in
multiple, simultaneous communications. For example, B may be receiving
requests from many clients other than A, and/or forwarding requests to
servers other than C, at the same time that it is handling A's request.
Any party to the communication which is not acting as a tunnel may
employ an internal cache for handling requests. The effect of a cache is
that the request/response chain is shortened if one of the participants
along the chain has a cached response applicable to that request. The
Fielding, et al [Page 13]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
following illustrates the resulting chain if B has a cached copy of an
earlier response from O (via C) for a request which has not been cached
by UA or A.
request chain ---------->
UA -----v----- A -----v----- B - - - - - - C - - - - - - O
<--------- response chain
Not all responses are usefully cachable, and some requests may contain
modifiers which place special requirements on cache behavior. HTTP
requirements for cache behavior and cachable responses are defined in
section 13.
In fact, there are a wide variety of architectures and configurations of
caches and proxies currently being experimented with or deployed across
the World Wide Web;
these Web. These systems include national hierarchies of proxy
caches to save transoceanic bandwidth, systems that broadcast or
multicast cache entries, organizations that distribute subsets of cached
data via CD-ROM, and so on. HTTP systems are used in corporate intranets
over high-bandwidth links, and for access via PDAs with low-power radio
links and intermittent connectivity. The goal of HTTP/1.1 is to support
the wide diversity of configurations already deployed while introducing
protocol constructs that meet the needs of those who build web
applications that require high reliability and, failing that, at least
reliable indications of failure.
Fielding, et al [Page 16]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
HTTP communication usually takes place over TCP/IP connections. The
default port is TCP 80[19], 80 [19], but other ports can be used. This does not
preclude HTTP from being implemented on top of any other protocol on the
Internet, or on other networks. HTTP only presumes a reliable transport;
any protocol that provides such guarantees can be used; the mapping of
the HTTP/1.1 request and response structures onto the transport data
units of the protocol in question is outside the scope of this
specification.
In HTTP/1.0, most implementations used a new connection for each
request/response exchange. In HTTP/1.1, a connection may be used for one
or more request/response exchanges, although connections may be closed
for a variety of reasons (see section 8.1).
2 Notational Conventions and Generic Grammar
2.1 Augmented BNF
All of the mechanisms specified in this document are described in both
prose and an augmented Backus-Naur Form (BNF) similar to that used by
RFC 822 [9]. Implementers will need to be familiar with the notation in
order to understand this specification. The augmented BNF includes the
following constructs:
Fielding, et al [Page 14]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
name = definition
The name of a rule is simply the name itself (without any enclosing
"<" and ">") and is separated from its definition by the equal "="
character. Whitespace is only significant in that indentation of
continuation lines is used to indicate a rule definition that spans
more than one line. Certain basic rules are in uppercase, such as SP,
LWS, HT, CRLF, DIGIT, ALPHA, etc. Angle brackets are used within
definitions whenever their presence will facilitate discerning the
use of rule names.
"literal"
Quotation marks surround literal text. Unless stated otherwise, the
text is case-insensitive.
rule1 | rule2
Elements separated by a bar ("|") are alternatives, e.g., "yes | no"
will accept yes or no.
Fielding, et al [Page 17]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
(rule1 rule2)
Elements enclosed in parentheses are treated as a single element.
Thus, "(elem (foo | bar) elem)" allows the token sequences
"elem foo elem" and "elem bar elem".
*rule
The character "*" preceding an element indicates repetition. The full
form is "<n>*<m>element" indicating at least <n> and at most <m>
occurrences of element. Default values are 0 and infinity so that
"*(element)" allows any number, including zero; "1*element" requires
at least one; and "1*2element" allows one or two.
[rule]
Square brackets enclose optional elements; "[foo bar]" is equivalent
to "*1(foo bar)".
N rule
Specific repetition: "<n>(element)" is equivalent to
"<n>*<n>(element)"; that is, exactly <n> occurrences of (element).
Thus 2DIGIT is a 2-digit number, and 3ALPHA is a string of three
alphabetic characters.
#rule
A construct "#" is defined, similar to "*", for defining lists of
elements. The full form is "<n>#<m>element " indicating at least <n>
and at most <m> elements, each separated by one or more commas (",")
and optional linear whitespace (LWS). This makes the usual form of
lists very easy; a rule such as
"( *LWS element *( *LWS "," *LWS element )) " can be shown as
"1#element". Wherever this construct is used, null elements are
allowed, but do not contribute to the count of elements present. That
is, "(element), , (element) " is permitted, but counts as only two
elements. Therefore, where at least one element is required, at least
Fielding, et al [Page 15]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
one non-null element must be present. Default values are 0 and
infinity so that "#element" allows any number, including zero;
"1#element" requires at least one; and "1#2element" allows one or
two.
; comment
A semi-colon, set off some distance to the right of rule text, starts
a comment that continues to the end of line. This is a simple way of
including useful notes in parallel with the specifications.
Fielding, et al [Page 18]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
implied *LWS
The grammar described by this specification is word-
based. word-based. Except
where noted otherwise, linear whitespace (LWS) can be included
between any two adjacent words (token or quoted-string), and between
adjacent tokens and separators, without changing the interpretation
of a field. At least one delimiter (LWS and/or separators) separators[jg3]) must
exist between any two tokens, since they would otherwise be
interpreted as a single token.
2.2 Basic Rules
The following rules are used throughout this specification to describe
basic parsing constructs. The US-ASCII coded character set is defined by
ANSI X3.4-1986 [21].
OCTET = <any 8-bit sequence of data>
CHAR = <any US-ASCII character (octets 0 - 127)>
UPALPHA = <any US-ASCII uppercase letter "A".."Z">
LOALPHA = <any US-ASCII lowercase letter "a".."z">
ALPHA = UPALPHA | LOALPHA
DIGIT = <any US-ASCII digit "0".."9">
CTL = <any US-ASCII control character
(octets 0 - 31) and DEL (127)>
CR = <US-ASCII CR, carriage return (13)>
LF = <US-ASCII LF, linefeed (10)>
SP = <US-ASCII SP, space (32)>
HT = <US-ASCII HT, horizontal-tab (9)>
<"> = <US-ASCII double-quote mark (34)>
HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all
protocol elements except the entity-body (see appendix 19.3 for tolerant
applications). The end-of-line marker within an entity-body is defined
by its associated media type, as described in section 3.7.
CRLF = CR LF
HTTP/1.1 headers can be folded onto multiple lines if the continuation
line begins with a space or horizontal tab. All linear white space,
including folding, has the same semantics as SP.
Fielding, et al [Page 16]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
LWS = [CRLF] 1*( SP | HT )
The TEXT rule is only used for descriptive field contents and values
that are not intended to be interpreted by the message parser. Words of
*TEXT may contain characters from character sets other than ISO 8859-1
[22] only when encoded according to the rules of RFC 2047 [14].
Fielding, et al [Page 19]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
TEXT = <any OCTET except CTLs,
but including LWS>
Hexadecimal numeric characters are used in several protocol elements.
HEX = "A" | "B" | "C" | "D" | "E" | "F"
| "a" | "b" | "c" | "d" | "e" | "f" | DIGIT
Many HTTP/1.1 header field values consist of words separated by LWS or
special characters. These special characters MUST be in a quoted string
to be used within a parameter value.
token = 1*<any CHAR except CTLs or separators>
separators = "(" | ")" | "<" | ">" | "@"
| "," | ";" | ":" | "\" | <">
| "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT
Comments can be included in some HTTP header fields by surrounding the
comment text with parentheses. Comments are only allowed in fields
containing "comment" as part of their field value definition. In all
other fields, parentheses are considered part of the field value.
comment = "(" *( ctext | quoted-pair | comment ) ")"
ctext = <any TEXT excluding "(" and ")">
A string of text is parsed as a single word if it is quoted using
double-quote marks.
quoted-string = ( <"> *(qdtext | quoted-pair ) <"> )
qdtext = <any TEXT except <">>
The backslash character ("\") may be used as a single-
character single-character quoting
mechanism only within quoted-string and comment constructs.
quoted-pair = "\" CHAR
3 Protocol Parameters
3.1 HTTP Version
HTTP uses a "<major>.<minor>" numbering scheme to indicate versions of
the protocol. The protocol versioning policy is intended to allow the sender to indicate the format of a
Fielding, et al [Page 20] 17]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
sender to indicate the format of a message and its capacity for
understanding further HTTP communication, rather than the features
obtained via that communication. No change is made to the version number
for the addition of message components which do not affect communication
behavior or which only add to extensible field values. The <minor>
number is incremented when the changes made to the protocol add features
which do not change the general message parsing algorithm, but which may
add to the message semantics and imply additional capabilities of the
sender. The <major> number is incremented when the format of a message
within the protocol is changed. See RFC 2145 [36] for a fuller
explanation.
The version of an HTTP message is indicated by an HTTP-
Version HTTP-Version field in
the first line of the message.
HTTP-Version = "HTTP" "/" 1*DIGIT "." 1*DIGIT
Note that the major and minor numbers MUST be treated as separate
integers and that each may be incremented higher than a single digit.
Thus, HTTP/2.4 is a lower version than HTTP/2.13, which in turn is lower
than HTTP/12.3. Leading zeros MUST be ignored by recipients and MUST NOT
be sent.
Applications sending Request or Response messages, as defined by this
specification, MUST include an HTTP-Version of "HTTP/1.1". Use of this
version number indicates that the sending application is at least
conditionally compliant with this specification.
The HTTP version of an application is the highest HTTP version for which
the application is at least conditionally compliant.
Proxy and gateway applications must be careful when forwarding messages
in protocol versions different from that of the application. Since the
protocol version indicates the protocol capability of the sender, a
proxy/gateway MUST never send a message with a version indicator which
is greater than its actual version; if version. If a higher version request is
received, the proxy/gateway MUST either downgrade the request version,
or respond with an error, or switch to tunnel behavior. Requests
Due to interoperability problems with a version lower than that HTTP/1.0 proxies discovered since
the publication of RFC 2068, caching proxies MUST, gateways MAY, and
tunnels MUST NOT upgrade the
proxy/gateway's version MAY be upgraded before being
forwarded; request to the highest version they
support. The proxy/gateway's response to that request MUST be in the
same major version as the request.
Note: Converting between versions of HTTP may involve modification
of header fields required or forbidden by the versions involved.
Fielding, et al [Page 21] 18]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
3.2 Uniform Resource Identifiers
URIs have been known by many names: WWW addresses, Universal Document
Identifiers, Universal Resource Identifiers [3], and finally the
combination of Uniform Resource Locators (URL) [4] and Names (URN) [20].
As far as HTTP is concerned, Uniform Resource Identifiers are simply
formatted strings which identify--via name, location, or any other
characteristic--a resource.
3.2.1 General Syntax
URIs in HTTP can be represented in absolute form or relative to some
known base URI [11], depending upon the context of their use. The two
forms are differentiated by the fact that absolute URIs always begin
with a scheme name followed by a colon.
URI = ( absoluteURI | relativeURI ) [ "#" fragment ]
absoluteURI = scheme ":" *( uchar | reserved )
relativeURI = net_path | abs_path | rel_path
net_path = "//" net_loc [ abs_path ]
abs_path = "/" rel_path
rel_path = [ path ] [ ";" params ] [ "?" query ]
path = fsegment *( "/" segment )
fsegment = 1*pchar
segment = *pchar
params = param *( ";" param )
param = *( pchar | "/" )
scheme = 1*( ALPHA | DIGIT | "+" | "-" | "." )
net_loc = *( pchar | ";" | "?" )
query = *( uchar | reserved )
fragment = *( uchar | reserved )
pchar = uchar | ":" | "@" | "&" | "=" | "+"
uchar = unreserved | escape
unreserved = ALPHA | DIGIT | safe | extra | national
escape = "%" HEX HEX
reserved = ";" | "/" | "?" | ":" | "@" | "&" | "=" | "+"
extra = "!" | "*" | "'" | "(" | ")" | ","
safe = "$" | "-" | "_" | "."
Fielding, et al [Page 22]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
unsafe = CTL | SP | <"> | "#" | "%" | "<" | ">"
national = <any OCTET excluding ALPHA, DIGIT,
reserved, extra, safe, and unsafe>
For definitive information on URL syntax and semantics, see
RFC 1738 [4] and RFC 1808 [11]. The BNF above includes
national characters not allowed in valid URLs as specified
by RFC 1738, since HTTP servers are not restricted in the
set of unreserved characters allowed to represent the
rel_path part of addresses, and HTTP proxies may receive
requests for URIs not defined by RFC 1738.
The HTTP protocol does not place any a priori limit on the
length of a URI. Servers MUST be able to handle the For definitive information on
URL syntax and semantics, see RFC XURI [42] (which replaces RFCs 1738
[4] and RFC 1808 [11]). This specification adopts the definitions of
"URI-reference", "absoluteURI", "relativeURI", "port",
"host","abs_path", "rel_path", and "site" from that specification.
The HTTP protocol does not place any a priori limit on the length of a
URI. Servers MUST be able to handle the URI of any resource they serve,
and SHOULD be able to handle URIs of unbounded length if they provide
GET-based forms that could generate such URIs. A server SHOULD return
414 (Request-URI Too Long) status if a URI is longer than the server can
handle (see section 10.4.15).
Note: Servers should be cautious about depending on URI lengths
above 255 bytes, because some older client or proxy implementations
may not properly support these lengths.
3.2.2 http URL
The "http" scheme is used to locate network resources via the HTTP
protocol. This section defines the scheme-specific syntax and semantics
for http URLs.
http_URL = "http:" "//" host [ ":" port ] [ abs_path ]
host = <A legal Internet host domain name or IP
address (in dotted-decimal form),
as defined by Section 2.1 of RFC 1123>
port = *DIGIT
If the port is empty or not given, port 80 is assumed. The semantics are
that the identified resource is located at the server listening for TCP
connections on that port of that host, and the Request-URI for the
resource is abs_path. The use of IP addresses in URL's SHOULD be avoided
whenever possible (see RFC 1900 [24]). If the abs_path is not present in
the URL, it MUST be given as "/" when used as a Request-
URI Request-URI for a
resource (section 5.1.2).
Fielding, et al [Page 23] 19]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
3.2.3 URI Comparison
When comparing two URIs to decide if they match or not, a client SHOULD
use a case-sensitive octet-by-octet comparison of the entire URIs, with
these exceptions:
. A port that is empty or not given is equivalent to the default port
for that URI; URI-reference;
. Comparisons of host names MUST be case-insensitive;
. Comparisons of scheme names MUST be case-insensitive;
. An empty abs_path is equivalent to an abs_path of "/".
Characters other than those in the "reserved" and "unsafe" sets (see
section 3.2) are equivalent to their ""%" HEX HEX" encodings.
For example, the following three URIs are equivalent:
http://abc.com:80/~smith/home.html
http://ABC.com/%7Esmith/home.html
http://ABC.com:/%7esmith/home.html
3.3 Date/Time Formats
3.3.1 Full Date
HTTP applications have historically allowed three different formats for
the representation of date/time stamps:
Sun, 06 Nov 1994 08:49:37 GMT ; RFC 822, updated by RFC 1123
Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036
Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format
The first format is preferred as an Internet standard and represents a
fixed-length subset of that defined by RFC 1123 [8] (an update to RFC
822 [9]). The second format is in common use, but is based on the
obsolete RFC 850 [12] date format and lacks a four-digit year. HTTP/1.1
clients and servers that parse the date value MUST accept all three
formats (for compatibility with HTTP/1.0), though they MUST only
generate the RFC 1123 format for representing HTTP-date values in header
fields.
Note: Recipients of date values are encouraged to be robust in
accepting date values that may have been sent by non-HTTP
applications, as is sometimes the case when retrieving or posting
messages via proxies/gateways to SMTP or NNTP.
Fielding, et al [Page 24]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
All HTTP date/time stamps MUST be represented in Greenwich Mean Time
(GMT), without exception. For the purposes of HTTP, GMT is exactly equal
to UTC (Coordinated Universal Time). This is indicated in the first two
formats by the inclusion of "GMT" as the three-letter abbreviation for
time zone, and MUST be assumed when reading the asctime format.
Fielding, et al [Page 20]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
HTTP-date = rfc1123-date | rfc850-date | asctime-date
rfc1123-date = wkday "," SP date1 SP time SP "GMT"
rfc850-date = weekday "," SP date2 SP time SP "GMT"
asctime-date = wkday SP date3 SP time SP 4DIGIT
date1 = 2DIGIT SP month SP 4DIGIT
; day month year (e.g., 02 Jun 1982)
date2 = 2DIGIT "-" month "-" 2DIGIT
; day-month-year (e.g., 02-Jun-82)
date3 = month SP ( 2DIGIT | ( SP 1DIGIT ))
; month day (e.g., Jun 2)
time = 2DIGIT ":" 2DIGIT ":" 2DIGIT
; 00:00:00 - 23:59:59
wkday = "Mon" | "Tue" | "Wed"
| "Thu" | "Fri" | "Sat" | "Sun"
weekday = "Monday" | "Tuesday" | "Wednesday"
| "Thursday" | "Friday" | "Saturday" | "Sunday"
month = "Jan" | "Feb" | "Mar" | "Apr"
| "May" | "Jun" | "Jul" | "Aug"
| "Sep" | "Oct" | "Nov" | "Dec"
Note: HTTP requirements for the date/time stamp format apply only
to their usage within the protocol stream. Clients and servers are
not required to use these formats for user presentation, request
logging, etc.
3.3.2 Delta Seconds
Some HTTP header fields allow a time value to be specified as an integer
number of seconds, represented in decimal, after the time that the
message was received.
delta-seconds = 1*DIGIT
3.4 Character Sets
HTTP uses the same definition of the term "character set" as that
described for MIME:
Fielding, et al [Page 25]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The term "character set" is used in this document to refer to a
method used with one or more tables to convert a sequence of octets
into a sequence of characters. Note that unconditional conversion
in the other direction is not required, in that not all characters
may be available in a given character set and a character set may
provide more than one sequence of octets to represent a particular
character. This definition is intended to allow various kinds of
character encodings, from simple single-table mappings such as US-ASCII US-
ASCII to complex table switching methods such as those that use ISO
2022's techniques. However, the definition associated with a MIME
character set name MUST fully specify the mapping to be performed
from octets to characters. In particular, use of external profiling
information to determine the exact mapping is not permitted.
Fielding, et al [Page 21]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Note: This use of the term "character set" is more commonly
referred to as a "character encoding." However, since HTTP and MIME
share the same registry, it is important that the terminology also
be shared.
HTTP character sets are identified by case-insensitive tokens. The
complete set of tokens is defined by the IANA Character Set registry
[19].
charset = token
Although HTTP allows an arbitrary token to be used as a charset value,
any token that has a predefined value within the IANA Character Set
registry [19] MUST represent the character set defined by that registry.
Applications SHOULD limit their use of character sets to those defined
by the IANA registry.
Implementers should be aware of IETF character set requirements [38]
[41].
3.5 Content Codings
Content coding values indicate an encoding transformation that has been
or can be applied to an entity. Content codings are primarily used to
allow a document to be compressed or otherwise usefully transformed
without losing the identity of its underlying media type and without
loss of information. Frequently, the entity is stored in coded form,
transmitted directly, and only decoded by the recipient.
content-coding = token
All content-coding values are case-insensitive. HTTP/1.1 uses content-coding content-
coding values in the Accept-Encoding (section 14.3) and Content-Encoding
(section 14.12) header fields. Although the value describes the content-coding, content-
coding, what is
Fielding, et al [Page 26]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 more important is that it indicates what decoding
mechanism will be required to remove the encoding.
The Internet Assigned Numbers Authority (IANA) acts as a registry for
content-coding value tokens. Initially, the registry contains the
following tokens:
gzip An encoding format produced by the file compression program "gzip"
(GNU zip) as described in RFC 1952 [25]. This format is a Lempel-Ziv Lempel-
Ziv coding (LZ77) with a 32 bit CRC.
compress
The encoding format produced by the common UNIX file compression
program "compress". This format is an adaptive Lempel-Ziv-Welch
coding (LZW).
Fielding, et al [Page 22]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Note: Use of program names for the identification of encoding
formats is not desirable and should be discouraged for future
encodings. Their use here is representative of historical practice,
not good design. For compatibility with previous implementations of
HTTP, applications should consider "x-gzip" and "x-
compress" "x-compress" to be
equivalent to "gzip" and "compress" respectively.
deflate The "zlib" format defined in RFC 1950 [31] in combination with
the "deflate" compression mechanism described in RFC 1951 [29].
identity
The default (identity) encoding; the use of no transformation
whatsoever. This content-coding is used only in the Accept-Encoding
header, and SHOULD NOT be used in Content-Encoding header.
New content-coding value tokens should be registered; to allow
interoperability between clients and servers, specifications of the
content coding algorithms needed to implement a new value should be
publicly available and adequate for independent implementation, and
conform to the purpose of content coding defined in this section.
3.6 Transfer Codings
Transfer coding values are used to indicate an encoding transformation
that has been, can be, or may need to be applied to an entity-body in
order to ensure "safe transport" through the network. This differs from
a content coding in that the transfer coding is a property of the
message, not of the original entity.
Fielding, et al [Page 27]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
transfer-coding = "chunked" | transfer-extension
transfer-extension = token *( ";" parameter )
Parameters may be in the form of attribute/value pairs.
parameter = attribute "=" value
attribute = token
value = token | quoted-string
All transfer-coding values are case-insensitive. HTTP/1.1 uses transfer
coding values in the Transfer-Encoding TE header field (section 14.Y) and in the Transfer-
Encoding header field (section 14.40).
Transfer codings are analogous to the Content-Transfer-
Encoding Content-Transfer-Encoding values
of MIME [7], which were designed to enable safe transport of binary data
over a 7-bit transport service. However, safe transport has a different
focus for an 8bit-clean transfer protocol. In HTTP, the only unsafe
characteristic of message-bodies is the difficulty in determining the
exact body length (section 7.2.2), or the desire to encrypt data over a
shared transport.
The Internet Assigned Numbers Authority (IANA) acts as a registry for
transfer-coding value tokens. Initially, the registry contains the
Fielding, et al [Page 23]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
following tokens: "chunked" (section 3.6.1), "identity" (section 3.6.2),
"gzip" (section 3.5), "compress" (section 3.5), and "deflate" (section
3.5).
New transfer-coding value tokens should be registered in the same way as
new content-coding value tokens (section 3.5).
A server which receives an entity-body with a transfer-coding it does
not understand SHOULD return 501 (Unimplemented), and close the
connection. A server MUST NOT send transfer-codings to an HTTP/1.0
client.
3.6.1 Chunked Transfer Coding
The chunked encoding modifies the body of a message in order to transfer
it as a series of chunks, each with its own size indicator, followed by
an optional trailer containing entity-header fields. This allows
dynamically-produced content to be transferred along with the
information necessary for the recipient to verify that it has received
the full message.
Chunked-Body = *chunk
last-chunk
trailer
CRLF
chunk = chunk-size [ chunk-extension ] CRLF
chunk-data CRLF
chunk-size = 1*HEX
last-chunk = 1*("0") [ chunk-extension ] CRLF
chunk-extension= *( ";" chunk-ext-name [ "="
chunk-ext-value chunk-ext-val ] )
chunk-ext-name = token
chunk-ext-val = token | quoted-string
chunk-data = chunk-size(OCTET)
trailer = *entity-header
The chunk-size field is a string of hex digits indicating the size of
the chunk. The chunked encoding is ended by any chunk whose size is
zero, followed by the trailer, which is terminated by an empty line.
The purpose of the trailer is allows the sender to provide an efficient way include additional HTTP header fields
at the end of the message. The Trailer header field can be used to supply information about an
entity that is generated dynamically. Applications
indicate which header fields are included in a trailer (see section
14.49).
A server using chunked transfer-coding in a response MUST NOT use the
trailer for other header fields than Content-MD5 and Authentication-Info
unless the "chunked" transfer-coding is present in the request as an
accepted transfer-coding in the TE field (section 14.48). The
Fielding, et al [Page 28] 24]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
send
Authentication-Info header fields in the trailer which are not explicitly
defined as being appropriate for the trailer.
The Content-MD5 header (section 14.16) is appropriate for
the trailer.
The Authentication-Info header defined by RFC 2069 [32] (An
Extension to HTTP: Digest Access Authentication), or its successor is appropriate for the trailer.
[43].
An example process for decoding a Chunked-Body is presented in appendix
19.4.6.
All HTTP/1.1 applications MUST be able to receive and decode the
"chunked" transfer coding, and MUST ignore chunk-
extension chunk-extension extensions
they do not understand. A server which
receives an entity-body with a
3.6.2 Identity Transfer Coding
The identity transfer-encoding is the default (identity) encoding; the
use of no transformation whatsoever. This transfer-coding it does not
understand SHOULD return 501 (Unimplemented), and close is used only
in the
connection. A server MUST TE header field, and SHOULD NOT send transfer-codings to an
HTTP/1.0 client. be used in any Transfer-Encoding
header field.
3.7 Media Types
HTTP uses Internet Media Types [17] in the Content-Type (section 14.18)
and Accept (section 14.1) header fields in order to provide open and
extensible data typing and type negotiation.
media-type = type "/" subtype *( ";" parameter )
type = token
subtype = token
Parameters may follow the type/subtype in the form of attribute/value
pairs.
parameter = attribute "=" value
attribute = token
value = token | quoted-string
The type, subtype, and parameter attribute names are case-
insensitive. case-insensitive.
Parameter values may or may not be case-
sensitive, case-sensitive, depending on the
semantics of the parameter name. Linear white space (LWS) MUST NOT be
used between the type and subtype, nor between an attribute and its
value. User agents that recognize the media-type MUST process (or
arrange to be processed by any external applications used to process
that type/subtype by the user agent) the parameters for that MIME type
as described by that type/subtype definition to the and inform the user
of any problems discovered.
Fielding, et al [Page 29]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Note: some older HTTP applications do not recognize media type
parameters. When sending data to older HTTP applications,
implementations should only use media type parameters when they are
required by that type/subtype definition.
Fielding, et al [Page 25]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Media-type values are registered with the Internet Assigned Number
Authority (IANA [19]). The media type registration process is outlined
in RFC 1590 [17]. Use of non-registered media types is discouraged.
3.7.1 Canonicalization and Text Defaults
Internet media types are registered with a canonical form. In general,
an entity-body transferred via HTTP messages MUST be represented in the
appropriate canonical form prior to its transmission; the exception is
"text" types, as defined in the next paragraph.
When in canonical form, media subtypes of the "text" type use CRLF as
the text line break. HTTP relaxes this requirement and allows the
transport of text media with plain CR or LF alone representing a line
break when it is done consistently for an entire entity-body. HTTP
applications MUST accept CRLF, bare CR, and bare LF as being
representative of a line break in text media received via HTTP. In
addition, if the text is represented in a character set that does not
use octets 13 and 10 for CR and LF respectively, as is the case for some
multi-byte character sets, HTTP allows the use of whatever octet
sequences are defined by that character set to represent the equivalent
of CR and LF for line breaks. This flexibility regarding line breaks
applies only to text media in the entity-body; a bare CR or LF MUST NOT
be substituted for CRLF within any of the HTTP control structures (such
as header fields and multipart boundaries).
If an entity-body is encoded with a Content-Encoding, the underlying
data MUST be in a form defined above prior to being encoded.
The "charset" parameter is used with some media types to define the
character set (section 3.4) of the data. When no explicit charset
parameter is provided by the sender, media subtypes of the "text" type
are defined to have a default charset value of "ISO-8859-1" when
received via HTTP. Data in character sets other than "ISO-8859-1" or its
subsets MUST be labeled with an appropriate charset value. See section
19.8.2 for compatibility problems.
Fielding, et al [Page 30]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
3.7.2 Multipart Types
MIME provides for a number of "multipart" types -- encapsulations of one
or more entities within a single message-body. All multipart types share
a common syntax, as defined in section 5.1.1 of RFC 2046 [40], and MUST
include a boundary parameter as part of the media type value. The
message body is itself a protocol element and MUST therefore use only
CRLF to represent line breaks between body-parts. Unlike in RFC 2046,
the epilogue of any multipart message MUST be empty; HTTP applications
MUST NOT transmit the epilogue (even if the original multipart contains
an epilogue).
Fielding, et al [Page 26]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
In HTTP, multipart body-parts MAY contain header fields which are
significant to the meaning of that part. A Content-Location header field
(section 14.15) SHOULD be included in the body-part of each enclosed
entity that can be identified by a URL.
In general, an HTTP user agent SHOULD follow the same or similar
behavior as a MIME user agent would upon receipt of a multipart type. If
an application receives an unrecognized multipart subtype, the
application MUST treat it as being equivalent to "multipart/mixed".
Note: The "multipart/form-data" type has been specifically defined
for carrying form data suitable for processing via the POST request
method, as described in RFC 1867 [15].
3.8 Product Tokens
Product tokens are used to allow communicating applications to identify
themselves by software name and version. Most fields using product
tokens also allow sub-products which form a significant part of the
application to be listed, separated by whitespace. By convention, the
products are listed in order of their significance for identifying the
application.
product = token ["/" product-version]
product-version = token
Examples:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3
Server: Apache/0.8.4
Product tokens should be short and to the point -- use of them for
advertising or other non-essential information is explicitly forbidden.
Although any token character may appear in a product-version, this token
SHOULD only be used
Fielding, et al [Page 31]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 for a version identifier (i.e., successive versions
of the same product SHOULD only differ in the product-version portion of
the product value).
3.9 Quality Values
HTTP content negotiation (section 12) uses short "floating point"
numbers to indicate the relative importance ("weight") of various
negotiable parameters. A weight is normalized to a real number in the
range 0 through 1, where 0 is the minimum and 1 the maximum value. If a
parameter has a quality value of 0, then content with this parameter is
`not acceptable' for the client. HTTP/1.1 applications MUST NOT generate
more than three digits after the decimal point. User configuration of
these values SHOULD also be limited in this fashion.
qvalue = ( "0" [ "." 0*3DIGIT ] )
| ( "1" [ "." 0*3("0") ] )
Fielding, et al [Page 27]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
"Quality values" is a misnomer, since these values merely represent
relative degradation in desired quality.
3.10 Language Tags
A language tag identifies a natural language spoken, written, or
otherwise conveyed by human beings for communication of information to
other human beings. Computer languages are explicitly excluded. HTTP
uses language tags within the Accept-Language and Content-Language
fields.
The syntax and registry of HTTP language tags is the same as that
defined by RFC 1766 [1]. In summary, a language tag is composed of 1 or
more parts: A primary language tag and a possibly empty series of
subtags:
language-tag = primary-tag *( "-" subtag )
primary-tag = 1*8ALPHA
subtag = 1*8ALPHA
Whitespace is not allowed within the tag and all tags are
case-insensitive. case-
insensitive. The name space of language tags is administered by the
IANA. Example tags include:
en, en-US, en-cockney, i-cherokee, x-pig-latin
where any two-letter primary-tag is an ISO 639 language abbreviation and
any two-letter initial subtag is an ISO 3166 country code. (The last
three tags above are not registered tags; all but the last are examples
of tags which could be registered in future.)
Fielding, et al [Page 32]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
3.11 Entity Tags
Entity tags are used for comparing two or more entities from the same
requested resource. HTTP/1.1 uses entity tags in the ETag (section
14.20), If-Match (section 14.25), If-None-
Match If-None-Match (section 14.26), and If-Range If-
Range (section 14.27) header fields. The definition of how they are used
and compared as cache validators is in section 13.3.3. An entity tag
consists of an opaque quoted string, possibly prefixed by a weakness
indicator.
entity-tag = [ weak ] opaque-tag
weak = "W/"
opaque-tag = quoted-string
A "strong entity tag" may be shared by two entities of a resource only
if they are equivalent by octet equality.
A "weak entity tag," indicated by the "W/" prefix, may be shared by two
entities of a resource only if the entities are equivalent and could be
substituted for each other with no significant change in semantics. A
weak entity tag can only be used for weak comparison.
Fielding, et al [Page 28]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
An entity tag MUST be unique across all versions of all entities
associated with a particular resource. A given entity tag value may be
used for entities obtained by requests on different URIs without
implying anything about the equivalence of those entities.
3.12 Range Units
HTTP/1.1 allows a client to request that only part (a range of) the
response entity be included within the response. HTTP/1.1 uses range
units in the Range (section 14.36) and Content-Range (section 14.17)
header fields. An entity may be broken down into subranges according to
various structural units.
range-unit = bytes-unit | other-range-unit
bytes-unit = "bytes"
other-range-unit = token
The only range unit defined by HTTP/1.1 is "bytes". HTTP/1.1
implementations may ignore ranges specified using other units. HTTP/1.1
has been designed to allow implementations of applications that do not
depend on knowledge of ranges.
Fielding, et al [Page 33]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
4 HTTP Message
4.1 Message Types
HTTP messages consist of requests from client to server and responses
from server to client.
HTTP-message = Request | Response ; HTTP/1.1 messages
Request (section 5) and Response (section 6) messages use the generic
message format of RFC 822 [9] for transferring entities (the payload of
the message). Both types of message consist of a start-line, one zero or
more header fields (also known as "headers"), an empty line (i.e., a
line with nothing preceding the CRLF) indicating the end of the header
fields, and an optional message-body.
generic-message = start-line
*message-header
CRLF
[ message-body ]
start-line = Request-Line | Status-Line
In the interest of robustness, servers SHOULD ignore any empty line(s)
received where a Request-Line is expected. In other words, if the server
is reading the protocol stream at the beginning of a message and
receives a CRLF first, it should ignore the CRLF.
Note: certain buggy HTTP/1.0 client implementations generate an
extra CRLF's after a POST request. To restate what is explicitly
Fielding, et al [Page 29]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
forbidden by the BNF, an HTTP/1.1 client must not preface or follow
a request with an extra CRLF.
4.2 Message Headers
HTTP header fields, which include general-header (section 4.5), request-header request-
header (section 5.3), response-header (section 6.2), and entity-header
(section 7.1) fields, follow the same generic format as that given in
Section 3.1 of RFC 822 [9]. Each header field consists of a name
followed by a colon (":") and the field value. Field names are case-
insensitive. The field value may be preceded by any amount of LWS,
though a single SP is preferred. Header fields can be extended over
multiple lines by preceding each extra line with at least one SP or HT.
Applications SHOULD follow "common form" when generating HTTP
constructs, since there might exist some implementations that fail to
accept anything beyond the common forms.
Fielding, et al [Page 34]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
message-header = field-name ":" [ field-value ] CRLF
field-name = token
field-value = *( field-content | LWS )
field-content = <the OCTETs making up the field-value
and consisting of either *TEXT or combinations
of token, separators, and quoted-string>
The order in which header fields with differing field names are received
is not significant. However, it is "good practice" to send general-header general-
header fields first, followed by request-header or response-header
fields, and ending with the entity-header fields.
Multiple message-header fields with the same field-name may be present
in a message if and only if the entire field-
value field-value for that header field
is defined as a comma-separated list [i.e., #(values)]. It MUST be
possible to combine the multiple header fields into one "field-name:
field-value" pair, without changing the semantics of the message, by
appending each subsequent field-value to the first, each separated by a
comma. The order in which header fields with the same field-name are
received is therefore significant to the interpretation of the combined
field value, and thus a proxy MUST NOT change the order of these field
values when a message is forwarded.
4.3 Message Body
The message-body (if any) of an HTTP message is used to carry the
entity-body associated with the request or response. The message-body
differs from the entity-body only when a transfer coding has been
applied, as indicated by the Transfer-Encoding header field (section
14.40).
message-body = entity-body
| <entity-body encoded as per Transfer-Encoding>
Fielding, et al [Page 30]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Transfer-Encoding MUST be used to indicate any transfer codings applied
by an application to ensure safe and proper transfer of the message.
Transfer-Encoding is a property of the message, not of the entity, and
thus can be added or removed by any application along the
request/response chain.
The rules for when a message-body is allowed in a message differ for
requests and responses.
Fielding, et al [Page 35]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The presence of a message-body in a request is signaled by the inclusion
of a Content-Length or Transfer-Encoding header field in the request's
message-headers. A message-
body message-body MUST NOT be included in a request if the
specification of the request method (section 5.1.1) does not allow
sending an entity-body in requests. A server SHOULD read and forward a
message-body on any request; if the request method does not include
defined semantics for an entity-body, then the message-body SHOULD be
ignored when handling the request.
For response messages, whether or not a message-body is included with a
message is dependent on both the request method and the response status
code (section 6.1.1). All responses to the HEAD request method MUST NOT
include a message-body, even though the presence of entity-header fields
might lead one to believe they do. All 1xx (informational), 204 (no
content), and 304 (not modified) responses MUST NOT include a message-body. message-
body. All other responses do include a message-body, although it may be
of zero length.
4.4 Message Length
When a message-body is included with a message, the length of that body
is determined by one of the following (in order of precedence):
1. Any response message which MUST NOT include a message-
body message-body (such as
the 1xx, 204, and 304 responses and any response to a HEAD request)
is always terminated by the first empty line after the header
fields, regardless of the entity-header fields present in the
message.
2. If a Transfer-Encoding header field (section 14.40) is present and
indicates that the "chunked" transfer coding has been applied, then
the length is defined by the chunked encoding (section 3.6).
3. If a Content-Length header field (section 14.14) is present, its
decimal value in bytes OCTETs represents the length of the message-body.
4. If the message uses the media type "multipart/byteranges", which
is self-delimiting, then that defines the length. This media type
MUST NOT be used unless the sender knows that the recipient can
parse it; the presence in a request of a Range header with multiple
Fielding, et al [Page 31]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
byte-range specifiers implies that the client can parse
multipart/byteranges responses.
5. By the server closing the connection. (Closing the connection
cannot be used to indicate the end of a request body, since that
would leave no possibility for the server to send back a response.)
Fielding, et al [Page 36]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
For compatibility with HTTP/1.0 applications, HTTP/1.1 requests
containing a message-body MUST include a valid Content-Length header
field unless the server is known to be HTTP/1.1 compliant. If a request
contains a message-body and a Content-Length is not given, the server
SHOULD respond with 400 (bad request) if it cannot determine the length
of the message, or with 411 (length required) if it wishes to insist on
receiving a valid Content-Length.
All HTTP/1.1 applications that receive entities MUST accept the
"chunked" transfer coding (section 3.6), thus allowing this mechanism to
be used for messages when the message length cannot be determined in
advance.
Messages MUST NOT include both a Content-Length header field and the
"chunked" transfer coding. If both are received, the Content-Length MUST
be ignored.
When a Content-Length is given in a message where a message-
body message-body is
allowed, its field value MUST exactly match the number of OCTETs in the
message-body. HTTP/1.1 user agents MUST notify the user when an invalid
length is received and detected.
4.5 General Header Fields
There are a few header fields which have general applicability for both
request and response messages, but which do not apply to the entity
being transferred. These header fields apply only to the message being
transmitted.
general-header = Cache-Control ; Section 14.9
| Connection ; Section 14.10
| Date ; Section 14.19
| Pragma ; Section 14.32
| Transfer-Encoding ; Section 14.40
| Upgrade ; Section 14.41
| Trailer ; Section 14.49
| Via ; Section 14.44
General-header field names can be extended reliably only in combination
with a change in the protocol version. However, new or experimental
header fields may be given the semantics of general header fields if all
parties in the communication recognize them to be general-header fields.
Unrecognized header fields are treated as entity-header fields.
Fielding, et al [Page 37] 32]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
5 Request
A request message from a client to a server includes, within the first
line of that message, the method to be applied to the resource, the
identifier of the resource, and the protocol version in use.
Request = Request-Line ; Section 5.1
*( general-header ; Section 4.5
| request-header ; Section 5.3
| entity-header ) ; Section 7.1
CRLF
[ message-body ] ; Section 4.3
5.1 Request-Line
The Request-Line begins with a method token, followed by the Request-URI
and the protocol version, and ending with CRLF. The elements are
separated by SP characters. No CR or LF are is allowed except in the final
CRLF sequence.
Request-Line = Method SP Request-URI SP HTTP-Version CRLF
5.1.1 Method
The Method token indicates the method to be performed on the resource
identified by the Request-URI. The method is case-
sensitive. case-sensitive.
Method = "OPTIONS" ; Section 9.2
| "GET" ; Section 9.3
| "HEAD" ; Section 9.4
| "POST" ; Section 9.5
| "PUT" ; Section 9.6
| "DELETE" ; Section 9.7
| "TRACE" ; Section 9.8
| "CONNECT" ; Section 9.9
| extension-method
extension-method = token
Fielding, et al [Page 38]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The list of methods allowed by a resource can be specified in an Allow
header field (section 14.7). The return code of the response always
notifies the client whether a method is currently allowed on a resource,
since the set of allowed methods can change dynamically. Servers SHOULD
return the status code 405 (Method Not Allowed) if the method is known
by the server but not allowed for the requested resource, and 501 (Not
Implemented) if the method is unrecognized or not implemented by the
server. The list of methods known by
a server can be listed in a Public response-header field
(section 14.35).
The methods GET and HEAD MUST be supported by all general-
purpose servers. All other methods are optional; however, if the above
methods are implemented, they MUST be implemented with the same
semantics as those specified in section 9.
Fielding, et al [Page 33]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
5.1.2 Request-URI
The Request-URI is a Uniform Resource Identifier (section 3.2) and
identifies the resource upon which to apply the request.
Request-URI = "*" | absoluteURI | abs_path
The three options for Request-URI are dependent on the nature of the
request. The asterisk "*" means that the request does not apply to a
particular resource, but to the server itself, and is only allowed when
the method used does not necessarily apply to a resource. One example
would be
OPTIONS * HTTP/1.1
The absoluteURI form is required when the request is being made to a
proxy. The proxy is requested to forward the request or service it from
a valid cache, and return the response. Note that the proxy MAY forward
the request on to another proxy or directly to the server specified by
the absoluteURI. In order to avoid request loops, a proxy MUST be able
to recognize all of its server names, including any aliases, local
variations, and the numeric IP address. An example Request-Line would
be:
GET http://www.w3.org/pub/WWW/TheProject.html HTTP/1.1
To allow for transition to absoluteURIs in all requests in future
versions of HTTP, all HTTP/1.1 servers MUST accept the absoluteURI form
in requests, even though HTTP/1.1 clients will only generate them in
requests to proxies.
The most common form of Request-URI is that used to identify a resource
on an origin server or gateway. In this case the
Fielding, et al [Page 39]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 absolute path of the
URI MUST be transmitted (see section 3.2.1, abs_path) as the Request-URI, Request-
URI, and the network location of the URI (net_loc) (site) MUST be transmitted in a
Host header field. For example, a client wishing to retrieve the
resource above directly from the origin server would create a TCP
connection to port 80 of the host "www.w3.org" and send the lines:
GET /pub/WWW/TheProject.html HTTP/1.1
Host: www.w3.org
followed by the remainder of the Request. Note that the absolute path
cannot be empty; if none is present in the original URI, it MUST be
given as "/" (the server root).
Editorial note: The proposed changes to OPTIONS will remove
the following down to ***END***. See draft-ietf-http-options-00.txt
If a proxy receives a request without any path in the
Request-URI and the method specified is capable of
supporting the asterisk form of request, then the last proxy
on the request chain MUST forward the request with "*" as
the final Request-URI. For example, the request
OPTIONS http://www.ics.uci.edu:8001 HTTP/1.1
would be forwarded by the proxy as
OPTIONS * HTTP/1.1
Host: www.ics.uci.edu:8001
after connecting to port 8001 of host "www.ics.uci.edu".
***END***
The Request-URI is transmitted in the format specified in section 3.2.1.
The origin server MUST decode the Request-URI in order to properly
interpret the request. Servers SHOULD respond to invalid Request-URIs
with an appropriate status code.
In requests that they forward, proxies MUST NOT rewrite the "abs_path"
part of a Request-URI in any way except as noted above to replace a null
abs_path with "*", no matter what the proxy does in its internal
implementation.
Fielding, et al [Page 34]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Note: The "no rewrite" rule prevents the proxy from changing the
meaning of the request when the origin server is improperly using a
non-reserved URL character for a reserved purpose. Implementers
should be aware that some pre-HTTP/1.1 proxies have been known to
rewrite the Request-URI.
Fielding, et al [Page 40]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
5.2 The Resource Identified by a Request
HTTP/1.1 origin servers SHOULD be aware that the exact resource
identified by an Internet request is determined by examining both the
Request-URI and the Host header field.
An origin server that does not allow resources to differ by the
requested host MAY ignore the Host header field value. (But see section
19.5.1 for other requirements on Host support in HTTP/1.1.)
An origin server that does differentiate resources based on the host
requested (sometimes referred to as virtual hosts or vanity hostnames)
MUST use the following rules for determining the requested resource on
an HTTP/1.1 request:
1. If Request-URI is an absoluteURI, the host is part of the
Request-URI. Any Host header field value in the request MUST be
ignored.
2. If the Request-URI is not an absoluteURI, and the request
includes a Host header field, the host is determined by the Host
header field value.
3. If the host as determined by rule 1 or 2 is not a valid host on
the server, the response MUST be a 400 (Bad Request) error message.
Recipients of an HTTP/1.0 request that lacks a Host header field MAY
attempt to use heuristics (e.g., examination of the URI path for
something unique to a particular host) in order to determine what exact
resource is being requested.
5.3 Request Header Fields
The request-header fields allow the client to pass additional
information about the request, and about the client itself, to the
server. These fields act as request modifiers, with semantics equivalent
to the parameters on a programming language method invocation.
request-header = Accept ; Section 14.1
| Accept-Charset ; Section 14.2
| Accept-Encoding ; Section 14.3
| Accept-Language ; Section 14.4
| Authorization ; Section 14.8
Fielding, et al [Page 41] 35]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
| Expect ; Section 14.47
| From ; Section 14.22
| Host ; Section 14.23
| If-Modified-Since ; Section 14.24
| If-Match ; Section 14.25
| If-None-Match ; Section 14.26
| If-Range ; Section 14.27
| If-Unmodified-Since ; Section 14.28
| Max-Forwards ; Section 14.31
| Proxy-Authorization ; Section 14.34
| Range ; Section 14.36
| Referer ; Section 14.37
| TE ; Section 14.48
| User-Agent ; Section 14.42
Request-header field names can be extended reliably only in combination
with a change in the protocol version. However, new or experimental
header fields MAY be given the semantics of request-header fields if all
parties in the communication recognize them to be request-header fields.
Unrecognized header fields are treated as entity-header fields.
6 Response
After receiving and interpreting a request message, a server responds
with an HTTP response message.
Response = Status-Line ; Section 6.1
*( general-header ; Section 4.5
| response-header ; Section 6.2
| entity-header ) ; Section 7.1
CRLF
[ message-body ] ; Section 7.2
Fielding, et al [Page 42]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
6.1 Status-Line
The first line of a Response message is the Status-Line, consisting of
the protocol version followed by a numeric status code and its
associated textual phrase, with each element separated by SP characters.
No CR or LF is allowed except in the final CRLF sequence.
Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF
6.1.1 Status Code and Reason Phrase
The Status-Code element is a 3-digit integer result code of the attempt
to understand and satisfy the request. These codes are fully defined in
section 10. The Reason-Phrase is intended to give a short textual
description of the Status-
Code. Status-Code. The Status-Code is intended for use by
automata and the Reason-Phrase is intended for the human user. The
client is not required to examine or display the Reason-Phrase.
Fielding, et al [Page 36]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
The first digit of the Status-Code defines the class of response. The
last two digits do not have any categorization role. There are 5 values
for the first digit:
. 1xx: Informational - Request received, continuing process
. 2xx: Success - The action was successfully received, understood,
and accepted
. 3xx: Redirection - Further action must be taken in order to
complete the request
. 4xx: Client Error - The request contains bad syntax or cannot be
fulfilled
. 5xx: Server Error - The server failed to fulfill an apparently
valid request
The individual values of the numeric status codes defined for HTTP/1.1,
and an example set of corresponding Reason-
Phrase's, Reason-Phrase's, are presented
below. The reason phrases listed here are only recommended -- they may
be replaced by local equivalents without affecting the protocol.
Status-Code = "100" ; Continue
| "101" ; Switching Protocols
| "200" ; OK
| "201" ; Created
| "202" ; Accepted
| "203" ; Non-Authoritative Information
Fielding, et al [Page 43]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
| "204" ; No Content
| "205" ; Reset Content
| "206" ; Partial Content
| "300" ; Multiple Choices
| "301" ; Moved Permanently
| "302" ; Moved Temporarily
| "303" ; See Other
| "304" ; Not Modified
| "305" ; Use Proxy
| "400" ; Bad Request
| "401" ; Unauthorized
| "402" ; Payment Required
| "403" ; Forbidden
| "404" ; Not Found
| "405" ; Method Not Allowed
| "406" ; Not Acceptable
| "407" ; Proxy Authentication Required
| "408" ; Request Time-out
| "409" ; Conflict
| "410" ; Gone
| "411" ; Length Required
| "412" ; Precondition Failed
Fielding, et al [Page 37]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
| "413" ; Request Entity Too Large
| "414" ; Request-URI Too Large
| "415" ; Unsupported Media Type
| "416" ; Requested range not valid satisfiable
| "500" ; Internal Server Error
| "501" ; Not Implemented
| "502" ; Bad Gateway
| "503" ; Service Unavailable
| "504" ; Gateway Time-out
| "505" ; HTTP Version not supported
| extension-code
extension-code = 3DIGIT
Reason-Phrase = *<TEXT, excluding CR, LF>
HTTP status codes are extensible. HTTP applications are not required to
understand the meaning of all registered status codes, though such
understanding is obviously desirable. However, applications MUST
understand the class of any status code, as indicated by the first
digit, and treat any unrecognized response as being equivalent to the
x00 status code of that class, with the exception that an unrecognized
response MUST NOT be cached. For example, if an unrecognized status code
of 431 is received by the client, it can safely assume that there was
something wrong with its request and treat the response as if it had
received a 400 status code. In such cases, user agents SHOULD present to
the user the entity returned with the response, since that entity is
likely to include human-readable information which will explain the
unusual status.
Fielding, et al [Page 44]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
6.2 Response Header Fields
The response-header fields allow the server to pass additional
information about the response which cannot be placed in the Status-Line. Status-
Line. These header fields give information about the server and about
further access to the resource identified by the Request-URI.
response-header = Accept-Ranges ; Section 14.5
| Age ; Section 14.6
| Location ; Section 14.30
| Proxy-Authenticate ; Section 14.33
| Public ; Section 14.35
| Retry-After ; Section 14.38
| Server ; Section 14.39
| Set-Proxy ; Section 14.48
| Vary ; Section 14.43
| Warning ; Section 14.45
| WWW-Authenticate ; Section 14.46
Response-header field names can be extended reliably only in combination
with a change in the protocol version. However, new or experimental
header fields MAY be given the semantics of response-header fields if
Fielding, et al [Page 38]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
all parties in the communication recognize them to be response-header
fields. Unrecognized header fields are treated as entity-header fields.
7 Entity
Request and Response messages MAY transfer an entity if not otherwise
restricted by the request method or response status code. An entity
consists of entity-header fields and an entity-body, although some
responses will only include the entity-headers.
In this section, both sender and recipient refer to either the client or
the server, depending on who sends and who receives the entity.
Fielding, et al [Page 45]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
7.1 Entity Header Fields
Entity-header fields define optional metainformation about the entity-body entity-
body or, if no body is present, about the resource identified by the
request.
entity-header = Allow ; Section 14.7
| Content-Base ; Section 14.11
| Content-Encoding ; Section 14.12
| Content-Language ; Section 14.13
| Content-Length ; Section 14.14
| Content-Location ; Section 14.15
| Content-MD5 ; Section 14.16
| Content-Range ; Section 14.17
| Content-Type ; Section 14.18
| ETag ; Section 14.20
| Expires ; Section 14.21
| Last-Modified ; Section 14.29
| extension-header
extension-header = message-header
The extension-header mechanism allows additional entity-
header entity-header fields to
be defined without changing the protocol, but these fields cannot be
assumed to be recognizable by the recipient. Unrecognized header fields
SHOULD be ignored by the recipient and MUST be forwarded by proxies.
7.2 Entity Body
The entity-body (if any) sent with an HTTP request or response is in a
format and encoding defined by the entity-
header entity-header fields.
entity-body = *OCTET
An entity-body is only present in a message when a message-
body message-body is
present, as described in section 4.3. The entity-
body entity-body is obtained from
the message-body by decoding any Transfer-Encoding that may have been
applied to ensure safe and proper transfer of the message.
Fielding, et al [Page 46] 39]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
7.2.1 Type
When an entity-body is included with a message, the data type of that
body is determined via the header fields Content-Type and Content-Encoding. Content-
Encoding. These define a two-layer, ordered encoding model:
entity-body := Content-Encoding( Content-Type( data ) )
Content-Type specifies the media type of the underlying data. Content-Encoding Content-
Encoding may be used to indicate any additional content codings applied
to the data, usually for the purpose of data compression, that are a
property of the requested resource. There is no default encoding.
Any HTTP/1.1 message containing an entity-body SHOULD include a Content-Type Content-
Type header field defining the media type of that body. If and only if
the media type is not given by a Content-Type field, the recipient MAY
attempt to guess the media type via inspection of its content and/or the
name extension(s) of the URL used to identify the resource. If the media
type remains unknown, the recipient SHOULD treat it as type
"application/octet-stream".
7.2.2 Length
The length of an entity-body is the length of the message-
body message-body after any
transfer codings have been removed. Section 4.4 defines how the length
of a message-body is determined.
8 Connections
8.1 Persistent Connections
8.1.1 Purpose
Prior to persistent connections, a separate TCP connection was
established to fetch each URL, increasing the load on HTTP servers and
causing congestion on the Internet. The use of inline images and other
associated data often require a client to make multiple requests of the
same server in a short amount of time. Analyses of these performance
problems are available [30]; analysis and results from a prototype
implementation are in [26]. Implementation experience and measurements
of actual HTTP/1.1 (RFC 2068) implementations show good results [39].
Alternatives have also been explored, for example, T/TCP [27].
Fielding, et al [Page 47]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Persistent HTTP connections have a number of advantages:
Fielding, et al [Page 40]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
. By opening and closing fewer TCP connections, CPU time is saved,
and memory used for TCP protocol control blocks is also saved.
. HTTP requests and responses can be pipelined on a connection.
Pipelining allows a client to make multiple requests without
waiting for each response, allowing a single TCP connection to be
used much more efficiently, with much lower elapsed time.
. Network congestion is reduced by reducing the number of packets
caused by TCP opens, and by allowing TCP sufficient time to
determine the congestion state of the network.
. HTTP can evolve more gracefully; since errors can be reported
without the penalty of closing the TCP connection. Clients using
future versions of HTTP might optimistically try a new feature, but
if communicating with an older server, retry with old semantics
after an error is reported.
HTTP implementations SHOULD implement persistent connections.
8.1.2 Overall Operation
A significant difference between HTTP/1.1 and earlier versions of HTTP
is that persistent connections are the default behavior of any HTTP
connection. That is, unless otherwise indicated, the client may assume
that the server will maintain a persistent connection.
Persistent connections provide a mechanism by which a client and a
server can signal the close of a TCP connection. This signaling takes
place using the Connection header field. Once a close has been signaled,
the client MUST not send any more requests on that connection.
8.1.2.1 Negotiation
An HTTP/1.1 server MAY assume that a HTTP/1.1 client intends to maintain
a persistent connection unless a Connection header including the
connection-token "close" was sent in the request. If the server chooses
to close the connection immediately after sending the response, it
SHOULD send a Connection header including the connection-token close.
An HTTP/1.1 client MAY expect a connection to remain open, but would
decide to keep it open based on whether the response from a server
contains a Connection header with the connection-token close. In case
the client does not want to
Fielding, et al [Page 48]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 maintain a connection for more than that
request, it SHOULD send a Connection header including the connection-token connection-
token close.
If either the client or the server sends the close token in the
Connection header, that request becomes the last one for the connection.
Clients and servers SHOULD NOT assume that a persistent connection is
maintained for HTTP versions less than 1.1 unless it is explicitly
Fielding, et al [Page 41]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
signaled. See section 19.7.1 for more information on backwards backward
compatibility with HTTP/1.0 clients.
In order to remain persistent, all messages on the connection must have
a self-defined message length (i.e., one not defined by closure of the
connection), as described in section 4.4.
8.1.2.2 Pipelining
A client that supports persistent connections MAY "pipeline" its
requests (i.e., send multiple requests without waiting for each response).
response) . A server MUST send its responses to those requests in the
same order that the requests were received.
Clients which assume persistent connections and pipeline immediately
after connection establishment SHOULD be prepared to retry their
connection if the first pipelined attempt fails. If a client does such a
retry, it MUST NOT pipeline before it knows the connection is
persistent. Clients MUST also be prepared to resend their requests if
the server closes the connection before sending all of the corresponding
responses.
Clients SHOULD NOT pipeline requests using non-idempotent methods or
non-idempotent sequences of methods (see section 9.1.2). Otherwise, a
premature termination of the transport connection may lead
toindeterminate results. A client wishing to send a non-idempotent
request SHOULD wait to send that request until it has received the
response status for the previous request.
8.1.3 Proxy Servers
It is especially important that proxies correctly implement the
properties of the Connection header field as specified in 14.2.1.
Fielding, et al [Page 49]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The proxy server MUST signal persistent connections separately with its
clients and the origin servers (or other proxy servers) that it connects
to. Each persistent connection applies to only one transport link.
A proxy server MUST NOT establish a persistent connection with an
HTTP/1.0 client (but see section 19.7.1.1 Error! Reference source not found. for
information about the Keep-Alive header implemented by many HTTP/1.0
clients).
Fielding, et al [Page 42]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
8.1.4 Practical Considerations
Servers will usually have some time-out value beyond which they will no
longer maintain an inactive connection. Proxy servers might make this a
higher value since it is likely that the client will be making more
connections through the same server. The use of persistent connections
places no requirements on the length of this time-out for either the
client or the server.
When a client or server wishes to time-out it SHOULD issue a graceful
close on the transport connection. Clients and servers SHOULD both
constantly watch for the other side of the transport close, and respond
to it as appropriate. If a client or server does not detect the other
side's close promptly it could cause unnecessary resource drain on the
network.
A client, server, or proxy MAY close the transport connection at any
time. For example, a client MAY have started to send a new request at
the same time that the server has decided to close the "idle"
connection. From the server's point of view, the connection is being
closed while it was idle, but from the client's point of view, a request
is in progress.
This means that clients, servers, and proxies MUST be able to recover
from asynchronous close events. Client software SHOULD reopen the
transport connection and retransmit the aborted sequence of requests
without user interaction so long as the request sequence is idempotent
(see section 9.1.2);.Non-idempotent methods or sequences MUST NOT be
automatically retried, although user agents MAY offer a human operator
the choice of retrying the request(s). However, this automatic retry
SHOULD NOT be repeated if the second request fails.
Servers SHOULD always respond to at least one request per connection, if
at all possible. Servers SHOULD NOT close a connection in the middle of
transmitting a response, unless a network or client failure is
suspected.
Fielding, et al [Page 50]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Clients that use persistent connections SHOULD limit the number of
simultaneous connections that they maintain to a given server. A single-user single-
user client SHOULD maintain AT MOST 2 connections with any server or
proxy. A proxy SHOULD use up to 2*N connections to another server or
proxy, where N is the number of simultaneously active users. These
guidelines are intended to improve HTTP response times and avoid
congestion of the Internet or other networks.
Fielding, et al [Page 43]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
8.2 Message Transmission Requirements
8.2.1 Persistent connections and flow control
HTTP/1.1 servers SHOULD maintain persistent connections and use TCP's
flow control mechanisms to resolve temporary overloads, rather than
terminating connections with the expectation that clients will retry.
The latter technique can exacerbate network congestion.
8.2.2 Monitoring connections for error status messages
An HTTP/1.1 (or later) client sending a message-body SHOULD monitor the
network connection for an error status while it is transmitting the
request. If the client sees an error status, it SHOULD immediately cease
transmitting the body. If the body is being sent using a "chunked"
encoding (section 3.6), a zero length chunk and empty trailer MAY be
used to prematurely mark the end of the message. If the body was
preceded by a Content-Length header, the client MUST close the
connection.
8.2.3 Automatic retrying of requests
If a user agent sees the transport connection close before it receives a
final response to its request, if the request method is idempotent (see
section 9.1.2), the user agent SHOULD retry the request without user
interaction. If the request method is not idempotent, the user agent
SHOULD NOT retry the request without user confirmation. (Confirmation
by user-agent software with semantic understanding of the application
MAY substitute for user confirmation.)
8.2.4 Use of the 100 (Continue) status
The purpose of the 100 (Continue) status (see section 10.1.1) is to
allow an end-client that is sending a request message with a request
body to determine if the origin server is willing to accept the request
(based on the request headers) before the client sends the request body.
In some cases, it may either be inappropriate or highly
Fielding, et al [Page 51]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 inefficient for
the client to send the body if the server will reject the message
without looking at the body.
Requirements for HTTP/1.1 clients:
. If a client will wait for a 100 (Continue) response before sending
the request body, it MUST send an Expect request-header field
(section 14.47) with the "100-
continue" "100-continue" expectation.
Fielding, et al [Page 44]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
. A client MUST NOT send an Expect request-header field (section
14.47) with the "100-continue" expectation if it does not intend to
send a request body.
Note: Because of the presence of older implementations, the
protocol allows ambiguous situations in which a client may send
"Expect: 100-continue" without receiving either a 419 417 (Expectation
Failed) status or a 100 (Continue) status. Therefore, when a client
sends this header field to an origin server (possibly via a proxy)
from which it has never seen a 100 (Continue) status, the client
should not wait for an indefinite or lengthy period before sending
the request body.
Requirements for HTTP/1.1 origin servers:
. Upon receiving a request which includes an Expect request-header
field with the "100-continue" expectation, an origin server MUST
either respond with 100 (Continue) status and continue to read from
the input stream, or respond with an error status. The origin
server MUST NOT wait for the request body before sending the 100
(Continue) response. If it responds with an error status, it MAY
close the transport connection or it MAY continue to read and
discard the rest of the request. It MUST NOT perform the requested
method if it returns an error status.
. An origin server SHOULD NOT send a 100 (Continue) response if the
request message does not include an Expect request-header field
with the "100-continue" expectation, and MUST NOT send a 100
(Continue) response if such a request comes from an HTTP/1.0 (or
earlier) client.
. An origin server MAY omit a 100 (Continue) response if has already
received some or all of the request body for the corresponding
request.
. An origin server that sends a 100 (Continue) response MUST
ultimately send a final status code, once the request body is
received and processed, unless it terminates the transport
connection prematurely.
Fielding, et al [Page 52]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
. If an origin server receives a request that does not include an
Expect request-header field with the "100-
continue" "100-continue" expectation,
the request includes a request body, and the server responds with
an error status before reading the entire request body from the
transport connection, then the server SHOULD NOT close the
transport connection until it has read the entire request, or until
the client closes the connection. Otherwise, the client may not
reliably receive the response message. However, this requirement
should not be construed as preventing a server from defending
itself against denial-of-service attacks, or from badly broken
client implementations.
Fielding, et al [Page 45]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
For compatibility with RFC 2068, a server MAY send a 100 (Continue)
status in response to an HTTP/1.1 PUT or POST request that does not
include an Expect request-header field with the "100-continue"
expectation. This exception, the purpose of which is to minimize any
client processing delays associated with an undeclared wait for 100
(Continue) status, applies only to HTTP/1.1 requests, and not to
requests with any other HTTP-version value.
Requirements for HTTP/1.1 proxies:
. If a proxy receives a request that includes an Expect
request-header request-
header field with the "100-continue" expectation, and the proxy
either knows that the next-
hop next-hop server complies with HTTP/1.1 or
higher, or does not know the HTTP version of the next-hop server,
it MUST forward the request, including the Expect header field.
. If the proxy knows that the version of the next-hop server is
HTTP/1.0 or lower, it MUST NOT forward the request, and it MUST
respond with a 419 417 (Expectation Failed) status.
. Proxies SHOULD maintain a cache recording the HTTP version numbers
received from recently-referenced next-
hop next-hop servers.
. A proxy MUST NOT forward a 100 (Continue) response if the request
message was received from an HTTP/1.0 (or earlier) client and did
not include an Expect request-
header request-header field with the "100-continue"
expectation. This requirement overrides the general rule for
forwarding of 1xx responses (see section 10.1).
Fielding, et al [Page 53]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
8.2.5 Client behavior if server prematurely closes connection
If an HTTP/1.1 client sends a request which includes a request body, but
which does not include an Expect request-
header request-header field with the "100-continue" "100-
continue" expectation, and if the client is not directly connected to an
HTTP/1.1 origin server, and if the the client sees the connection close
before receiving any status from the server, the client SHOULD retry the
request, subject to the restrictions in section 8.2.3. If the client
does retry this request, it MAY use the following "binary exponential
backoff" algorithm to be assured of obtaining a reliable response:
1.Initiate
1. Initiate a new connection to the server
2.Transmit
2. Transmit the request-headers
3.Initialize
3. Initialize a variable R to the estimated round-trip time to the
server (e.g., based on the time it took to establish the
connection), or to a constant value of 5 seconds if the round-trip
time is not available.
4.Compute
Fielding, et al [Page 46]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
4. Compute T = R * (2**N), where N is the number of previous retries
of this request.
5.Wait
5. Wait either for an error response from the server, or for T seconds
(whichever comes first)
6.If
6. If no error response is received, after T seconds transmit the body
of the request.
7.If
7. If client sees that the connection is closed prematurely, repeat
from step 1 until the request is accepted, an error response is
received, or the user becomes impatient and terminates the retry
process.
If at any point an error status is received, the client
. SHOULD NOT continue and
. SHOULD close the connection if it has not completed sending the
request message.
9 Method Definitions
The set of common methods for HTTP/1.1 is defined below. Although this
set can be expanded, additional methods cannot be assumed to share the
same semantics for separately extended clients and servers.
Fielding, et al [Page 54]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The Host request-header field (section 14.23) MUST accompany all
HTTP/1.1 requests.
9.1 Safe and Idempotent Methods
9.1.1 Safe Methods
Implementers should be aware that the software represents the user in
their interactions over the Internet, and should be careful to allow the
user to be aware of any actions they may take which may have an
unexpected significance to themselves or others.
In particular, the convention has been established that the GET and HEAD
methods should never have the significance of taking an action other
than retrieval. These methods should be considered "safe." This allows
user agents to represent other methods, such as POST, PUT and DELETE, in
a special way, so that the user is made aware of the fact that a
possibly unsafe action is being requested.
Fielding, et al [Page 47]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Naturally, it is not possible to ensure that the server does not
generate side-effects as a result of performing a GET request; in fact,
some dynamic resources consider that a feature. The important
distinction here is that the user did not request the side-effects, so
therefore cannot be held accountable for them.
9.1.2 Idempotent Methods
Methods may also have the property of "idempotence" in that (aside from
error or expiration issues) the side-effects of N > 0 identical
requests is the same as for a single request. The methods GET, HEAD, PUT
and DELETE share this property. Also, the methods OPTIONS and TRACE
should have no side effects, and so are inherently idempotent.
However, it is possible that a sequence of several requests is non-idempotent, non-
idempotent, even if all of the methods executed in that sequence is
idempotent. (A sequence is idempotent if a single execution of the
entire sequence always yields a result that is not changed by a
reexecution of all, or part, of that sequence.) For example, a sequence
is non-
idempotent non-idempotent if its result depends on a value that is later
modified in the same sequence.
A sequence that never has side effects is idempotent, by definition
(provided that no concurrent operations are being executed on the same
set of resources).
Fielding, et al [Page 55]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
9.2 OPTIONS
The OPTIONS method represents a request for information about the
communication options available on the request/response chain identified
by the Request-URI. This method allows the client to determine the
options and/or requirements associated with a resource, or the
capabilities of a server, without implying a resource action or
initiating a resource retrieval.
Editorial note: The proposed changes to OPTIONS will change
the following down
Responses to ***END***. See draft-ietf-http-
options-00.txt.
Unless this method are not cachable.
If the server's response is OPTIONS request includes an error, entity-body (as indicated by the response
presence of Content-Length or Transfer-Encoding), then the media type
MUST
NOT include entity information other than what can be
considered as communication options (e.g., Allow is
appropriate, but indicated by a Content-Type is not). Responses to field. Although this
method are specification
does not cachable. define any use for such a body, future extensions to HTTP may
use the OPTIONS body to make more detailed queries on the server. A
server that does not support such an extension MAY discard the request
body.
If the Request-URI is an asterisk ("*"), the OPTIONS request is intended
to apply to the server in general rather than to a specific resource.
Since a server's communication options typically depend on the resource,
the "*" request is only useful as a whole. A 200
response SHOULD include any header fields which indicate
optional features implemented by "ping" or "no-op" type of method; it
Fielding, et al [Page 48]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
does nothing beyond allowing the server (e.g., Public),
including any extensions not defined by this specification,
in addition client to any applicable general or response-header
fields. As described in section 5.1.2, an "OPTIONS *"
request test the capabilities of the
server. For example, this can be applied through used to test a proxy by specifying the
destination server in the Request-URI without any path
information. for HTTP/1.1
compliance (or lack thereof).
If the Request-URI is not an asterisk, the OPTIONS request applies only
to the options that are available when communicating with that resource.
A 200 response SHOULD include any header fields which that indicate optional
features implemented by the server and applicable to that resource
(e.g., Allow), possibly including any extensions not defined by this
specification, in addition to any applicable general or
response-header fields. If the OPTIONS request passes
through a proxy, the proxy MUST edit the
specification. The response to exclude
those options which apply to body, if any, SHOULD also include
information about the communication options. The format for such a proxy's capabilities and
which are known body
is not defined by this specification, but may be defined by future
extensions to HTTP. Content negotiation MAY be unavailable through that proxy.
***END*** used to select the
appropriate response format. If no response body is included, the
response MUST include a Content-Length field with a field-value of "0".
The Max-Forwards request-header field MAY be used to target a specific
proxy in the request chain. When a proxy receives an OPTIONS request on
an absoluteURI for which request forwarding is permitted, the proxy MUST
check for a Max-Forwards field. If the Max-Forwards field-value is zero
("0"), the proxy MUST NOT forward the message; instead, the proxy SHOULD
respond with its own communication options. If the Max-Forwards field-
value is an integer greater than zero, the proxy MUST decrement the
field-value when it forwards the request. If no Max-Forwards field is
present in the request, then the forwarded request MUST NOT include a
Max-Forwards field.
9.3 GET
The GET method means retrieve whatever information (in the form of an
entity) is identified by the Request-URI. If the Request-URI refers to a
data-producing process, it is the produced data which shall be returned
as the entity in the response and not the source text of the process,
unless that text happens to be the output of the process.
Fielding, et al [Page 56]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The semantics of the GET method change to a "conditional GET" if the
request message includes an If-Modified-Since, If-Unmodified-Since, If-Match, If-
Match, If-None-Match, or If-Range header field. A conditional GET method
requests that the entity be transferred only under the circumstances
described by the conditional header field(s). The conditional GET method
is intended to reduce unnecessary network usage by allowing cached
entities to be refreshed without requiring multiple requests or
transferring data already held by the client.
The semantics of the GET method change to a "partial GET" if the request
message includes a Range header field. A partial GET requests that only
part of the entity be transferred, as described in section 14.36. The
partial GET method is intended to reduce unnecessary network usage by
Fielding, et al [Page 49]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
allowing partially-retrieved entities to be completed without
transferring data already held by the client.
The response to a GET request is cachable if and only if it meets the
requirements for HTTP caching described in section 13.
See section 15.11 15.10 for security considerations when used for forms.
9.4 HEAD
The HEAD method is identical to GET except that the server MUST NOT
return a message-body in the response. The metainformation contained in
the HTTP headers in response to a HEAD request SHOULD be identical to
the information sent in response to a GET request. This method can be
used for obtaining metainformation about the entity implied by the
request without transferring the entity-body itself. This method is
often used for testing hypertext links for validity, accessibility, and
recent modification.
The response to a HEAD request may be cachable in the sense that the
information contained in the response may be used to update a previously
cached entity from that resource. If the new field values indicate that
the cached entity differs from the current entity (as would be indicated
by a change in Content-Length, Content-MD5, ETag or Last-Modified), then
the cache MUST treat the cache entry as stale.
9.5 POST
The POST method is used to request that the destination server accept
the entity enclosed in the request as a new subordinate of the resource
identified by the Request-URI in
Fielding, et al [Page 57]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 the Request-Line. POST is designed to
allow a uniform method to cover the following functions:
. Annotation of existing resources;
. Posting a message to a bulletin board, newsgroup, mailing list, or
similar group of articles;
. Providing a block of data, such as the result of submitting a form,
to a data-handling process;
. Extending a database through an append operation.
The actual function performed by the POST method is determined by the
server and is usually dependent on the Request-URI. The posted entity is
subordinate to that URI in the same way that a file is subordinate to a
directory containing it, a news article is subordinate to a newsgroup to
which it is posted, or a record is subordinate to a database.
Fielding, et al [Page 50]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
The action performed by the POST method might not result in a resource
that can be identified by a URI. In this case, either 200 (OK) or 204
(No Content) is the appropriate response status, depending on whether or
not the response includes an entity that describes the result.
If a resource has been created on the origin server, the response SHOULD
be 201 (Created) and contain an entity which describes the status of the
request and refers to the new resource, and a Location header (see
section 14.30).
Responses to this method are not cachable, unless the response includes
appropriate Cache-Control or Expires header fields. However, the 303
(See Other) response can be used to direct the user agent to retrieve a
cachable resource.
POST requests must obey the message transmission requirements set out in
section 8.2.
See section 15.11 15.10 for security considerations.
9.6 PUT
Editor's note: Paul Leach is circulating changes that would
define how to do PUTs with byte ranges; the spec is
currently silent on the topic.
The PUT method requests that the enclosed entity be stored under the
supplied Request-URI. If the Request-URI refers to an already existing
resource, the enclosed entity SHOULD be considered as a modified version
of the one residing on the
Fielding, et al [Page 58]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 origin server. If the Request-URI does not
point to an existing resource, and that URI is capable of being defined
as a new resource by the requesting user agent, the origin server can
create the resource with that URI. If a new resource is created, the
origin server MUST inform the user agent via the 201 (Created) response.
If an existing resource is modified, either the 200 (OK) or 204 (No
Content) response codes SHOULD be sent to indicate successful completion
of the request. If the resource could not be created or modified with
the Request-URI, an appropriate error response SHOULD be given that
reflects the nature of the problem. The recipient of the entity MUST NOT
ignore any Content-* (e.g. Content-Range) headers that it does not
understand or implement and MUST return a 501 (Not Implemented) response
in such cases.
If the request passes through a cache and the Request-URI identifies one
or more currently cached entities, those entries should be treated as
stale. Responses to this method are not cachable.
The fundamental difference between the POST and PUT requests is
reflected in the different meaning of the Request-URI. The URI in a POST
request identifies the resource that will handle the enclosed entity.
That resource may be a data-
accepting data-accepting process, a gateway to some other
protocol, or a separate entity that accepts annotations. In contrast,
the URI in a PUT request identifies the entity enclosed with the request
-- the user agent knows what URI is intended and the server MUST NOT
Fielding, et al [Page 51]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
attempt to apply the request to some other resource. If the server
desires that the request be applied to a different URI, it MUST send a
301 (Moved Permanently) response; the user agent MAY then make its own
decision regarding whether or not to redirect the request.
A single resource MAY be identified by many different URIs. For example,
an article may have a URI for identifying "the current version" which is
separate from the URI identifying each particular version. In this case,
a PUT request on a general URI may result in several other URIs being
defined by the origin server.
HTTP/1.1 does not define how a PUT method affects the state of an origin
server.
PUT requests must obey the message transmission requirements set out in
section 8.2.
9.7 DELETE
The DELETE method requests that the origin server delete the
resource identified by the Request-URI. This
9.6.1 Partial PUT (PUT with Content-Range)
A PUT method MAY be
overridden supply a partial entity body specified by human intervention (or other means) on the
Fielding, et al [Page 59]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
origin server. a Content-
Range header. The client cannot be guaranteed PUT requests that the
operation has been carried out, even if resource be updated or created
with the status code
returned from partial entity-body, in a manner entirely up to the origin server indicates that the action
has been completed successfully.
server. However, the origin server SHOULD
not may indicate success unless, at the time to caches that they may
perform the response same update to a cached copy.
Note: Even if partial PUT is
given, not exceedingly interesting, it intends should
establish a paradigm for possible future methods that do
incremental updates to delete the resource or move it resources and want to an
inaccessible location.
A successful response SHOULD be 200 (OK) if allow incremental
updates to cached copies.
1. An HTTP/1.1 server that does not support PUT with Content-Range
MUST reply with 506 (Partial Update Not Implemented) and MUST NOT
perform any action on the response
includes an entity describing requested resource.
2. An HTTP/1.1 client MUST know that that the status, 202 (Accepted) if origin server for the action has
request supports PUT with Content-Range header (but not yet been enacted, or 204 (No Content) if
neccessarily on the response specified resource) before attempting such a
request. This is OK but necessary since a pre-1.1 server that does not include an entity.
If
understand PUT with Content-Range header will overwrite the request passes through a cache and whole
resource instead of just the Request-URI
identifies one Content-Range the client requested.
3. An HTTP/1.1 origin server MAY reply to a PUT with Content-Range
with a 207 (Partial Update OK) if the change in the entity body of
a cached response can be duplicated by a cache by merely replacing
the bytes at the byte positions specified in the Content-Range
with the corresponding bytes in the entity-body in the request.
Client and proxies that do not understand 207 (Range Update) will
be correct if they treat it as "200 OK". (Recall that responses to
PUT are not cachable)
Fielding, et al [Page 52]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
4. An HTTP/1.1 cache receiving a 207 (Partial Update OK) status-code
in the response to a PUT with Content-Range MAY update the entity
in the cache as described above; if it does not, or if the status-
code is anything else, it MUST invalidate the entity, as per
section 9.6)
9.7 DELETE
The DELETE method requests that the origin server delete the resource
identified by the Request-URI. This method MAY be overridden by human
intervention (or other means) on the origin server. The client cannot be
guaranteed that the operation has been carried out, even if the status
code returned from the origin server indicates that the action has been
completed successfully. However, the server SHOULD not indicate success
unless, at the time the response is given, it intends to delete the
resource or move it to an inaccessible location.
A successful response SHOULD be 200 (OK) if the response includes an
entity describing the status, 202 (Accepted) if the action has not yet
been enacted, or 204 (No Content) if the response is OK but does not
include an entity.
If the request passes through a cache and the Request-URI identifies one
or more currently cached entities, those entries should be treated as
stale. Responses to this method are not cachable.
9.8 TRACE
The TRACE method is used to invoke a remote, application-
layer application-layer loop-back
of the request message. The final recipient of the request SHOULD
reflect the message received back to the client as the entity-body of a
200 (OK) response. The final recipient is either the origin server or
the first proxy or gateway to receive a Max-Forwards value of zero (0)
in the request (see section 14.31). A TRACE request MUST NOT include an
entity.
TRACE allows the client to see what is being received at the other end
of the request chain and use that data for testing or diagnostic
information. The value of the Via header field (section 14.44) is of
particular interest, since it acts as a trace of the request chain. Use
of the Max-Forwards header field allows the client to limit the length
of the request chain, which is useful for testing a chain of proxies
forwarding messages in an infinite loop.
If successful, the response SHOULD contain the entire request message in
the entity-body, with a Content-Type of "message/http". Responses to
this method MUST NOT be cached.
Fielding, et al [Page 53]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
9.9 CONNECT
This specification reserves the method name CONNECT for use by SSL
tunnelling. [44]
10 Status Code Definitions
Each Status-Code is described below, including a description of which
method(s) it can follow and any metainformation required in the
response.
Fielding, et al [Page 60]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Status codes are assigned per IANA registry [45].
10.1 Informational 1xx
This class of status code indicates a provisional response, consisting
only of the Status-Line and optional headers, and is terminated by an
empty line. There are no required headers for this class of status
codes. Since HTTP/1.0 did not define any 1xx status codes, servers MUST
NOT send a 1xx response to an HTTP/1.0 client except under experimental
conditions.
A client MUST be prepared to accept one or more 1xx status responses
prior to a regular response, even if the client does not expect a 100
(Continue) status message. Unexpected 1xx status responses MAY be
ignored by a user agent.
Proxies MUST forward 1xx responses, unless the connection between the
proxy and its client has been closed, or unless the proxy itself
requested the generation of the 1xx response. (For example, if a proxy
adds a "Expect: 100-
continue" 100-continue" field when it forwards a request, then it
need not forward the corresponding 100 (Continue) response(s).)
10.1.1 100 Continue
The client may continue with its request. This interim response is used
to inform the client that the initial part of the request has been
received and has not yet been rejected by the server. The client SHOULD
continue by sending the remainder of the request or, if the request has
already been completed, ignore this response. The server MUST send a
final response after the request has been completed. See section 8.2.4
for detailed discussion of the use and handling of this status code.
10.1.2 101 Switching Protocols
The server understands and is willing to comply with the client's
request, via the Upgrade message header field (section 14.41), for a
Fielding, et al [Page 54]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
change in the application protocol being used on this connection. The
server will switch protocols to those defined by the response's Upgrade
header field immediately after the empty line which terminates the 101
response.
The protocol should only be switched when it is advantageous to do so.
For example, switching to a newer version of HTTP is advantageous over
older versions, and switching to a real-time, synchronous protocol may
be advantageous when delivering resources that use such features.
Fielding, et al [Page 61]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
10.2 Successful 2xx
This class of status code indicates that the client's request was
successfully received, understood, and accepted.
10.2.1 200 OK
The request has succeeded. The information returned with the response
is dependent on the method used in the request, for example:
GET an entity corresponding to the requested resource is sent in the
response;
HEAD the entity-header fields corresponding to the requested resource
are sent in the response without any message-
body; message-body;
POST an entity describing or containing the result of the action;
TRACE an entity containing the request message as received by the end
server.
10.2.2 201 Created
The request has been fulfilled and resulted in a new resource being
created. The newly created resource can be referenced by the URI(s)
returned in the entity of the response, with the most specific URL for
the resource given by a Location header field. The origin server MUST
create the resource before returning the 201 status code. If the action
cannot be carried out immediately, the server should respond with 202
(Accepted) response instead.
10.2.3 202 Accepted
The request has been accepted for processing, but the processing has not
been completed. The request MAY or MAY NOT eventually be acted upon, as
it MAY be disallowed when processing actually takes place. There is no
Fielding, et al [Page 55]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
facility for re-sending a status code from an asynchronous operation
such as this.
The 202 response is intentionally non-committal. Its purpose is to allow
a server to accept a request for some other process (perhaps a batch-oriented batch-
oriented process that is only run once per day) without requiring that
the user agent's connection to the server persist until the process is
completed. The entity returned with this response SHOULD include an
indication of the request's current status and
Fielding, et al [Page 62]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 either a pointer to a
status monitor or some estimate of when the user can expect the request
to be fulfilled.
10.2.4 203 Non-Authoritative Information
The returned metainformation in the entity-header is not the definitive
set as available from the origin server, but is gathered from a local or
a third-party copy. The set presented MAY be a subset or superset of the
original version. For example, including local annotation information
about the resource MAY result in a superset of the metainformation known
by the origin server. Use of this response code is not required and is
only appropriate when the response would otherwise be 200 (OK).
10.2.5 204 No Content
The server has fulfilled the request but there is no new information to
send back. If the client is a user agent, it SHOULD NOT change its
document view from that which caused the request to be sent. This
response is primarily intended to allow input for actions to take place
without causing a change to the user agent's active document view. The
response MAY include new metainformation in the form of entity-headers,
which SHOULD apply to the document currently in the user agent's active
view.
The 204 response MUST NOT include a message-body, and thus is always
terminated by the first empty line after the header fields.
10.2.6 205 Reset Content
The server has fulfilled the request and the user agent SHOULD reset the
document view which caused the request to be sent. This response is
primarily intended to allow input for actions to take place via user
input, followed by a clearing of the form in which the input is given so
that the user can easily initiate another input action. The response
MUST NOT include an entity.
Fielding, et al [Page 56]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.2.7 206 Partial Content
The server has fulfilled the partial GET request for the resource. The
request must have included a Range header field (section 14.36)
indicating the desired range , and may have included an If-Range header
field (section 14.27) to make the request conditional.
The response MUST include the following header fields:
Fielding, et al [Page 63]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
. Either a Content-Range header field (section 14.17) indicating the
range included with this response, or a multipart/byteranges
Content-Type including Content-
Range Content-Range fields for each part. If
multipart/byteranges is not used, the Content-Length header field
in the response MUST match the actual number of OCTETs transmitted
in the message-body.
. Date
. ETag and/or Content-Location, if the header would have been sent in
a 200 response to the same request
. Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same variant
If the 206 response is the result of an If-Range request that used a
strong cache validator (see section 13.3.3), the response SHOULD NOT
include other entity-headers. If the response is the result of an If-Range If-
Range request that used a weak validator, the response MUST NOT include
other entity-
headers; entity-headers; this prevents inconsistencies between cached
entity-bodies and updated headers. Otherwise, the response MUST include
all of the entity-headers that would have been returned with a 200 (OK)
response to the same request.
A cache MUST NOT combine a 206 response with other previously cached
content if the ETag or Last-Modified headers do not match exactly, see
13.5.4.
A cache that does not support the Range and Content-Range headers MUST
NOT cache 206 (Partial) responses.
10.2.8 207 Partial Update OK
The server has fulfilled a method that specified a partial update, and
the change in the resource may be mimiced by a cache that understands
the method. In the case of partial PUT the change in the resource can be
duplicated by a cache merely by replacing the bytes at the byte
positions specified with the corresponding bytes in the entity-body in
the request.
Fielding, et al [Page 57]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.3 Redirection 3xx
This class of status code indicates that further action needs to be
taken by the user agent in order to fulfill the request. The action
required MAY be carried out by the user agent without interaction with
the user if and only if the method used in the second request is GET or
HEAD. A user
agent client SHOULD NOT automatically redirect a request more than
5 times, implement detect infinite redirection loops, since
such redirections usually indicate an
infinite loop. loops generate network traffic for each redirection.
Note: previous versions of this specification recommended a maximum
of five redirections. Content developers should be aware that there
may be clients that implement such a fixed limitation.
10.3.1 300 Multiple Choices
The requested resource corresponds to any one of a set of
representations, each with its own specific location, and agent-driven
negotiation information (section 12) is being
Fielding, et al [Page 64]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 provided so that the user
(or user agent) can select a preferred representation and redirect its
request to that location.
Unless it was a HEAD request, the response SHOULD include an entity
containing a list of resource characteristics and location(s) from which
the user or user agent can choose the one most appropriate. The entity
format is specified by the media type given in the Content-Type header
field. Depending upon the format and the capabilities of the user agent,
selection of the most appropriate choice may be performed automatically.
However, this specification does not define any standard for such
automatic selection.
If the server has a preferred choice of representation, it SHOULD
include the specific URL for that representation in the Location field;
user agents MAY use the Location field value for automatic redirection.
This response is cachable unless indicated otherwise.
10.3.2 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any
future references to this resource SHOULD be done using one of the
returned URIs. Clients with link editing capabilities SHOULD
automatically re-link references to the Request-URI to one or more of
the new references returned by the server, where possible. This response
is cachable unless indicated otherwise.
If the new URI is a location, its URL SHOULD be given by the Location
field in the response. Unless the request method was HEAD, the entity of
the response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s).
If the 301 status code is received
Fielding, et al [Page 58]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
If the 301 status code is received in response to a request other than
GET or HEAD, the user agent MUST NOT automatically redirect the request
unless it can be confirmed by the user, since this might change the
conditions under which the request was issued.
Note: When automatically redirecting a POST request after receiving
a 301 status code, some existing HTTP/1.0 user agents will
erroneously change it into a GET request.
10.3.3 302 Moved Temporarily Found
The requested resource resides temporarily under a different URI. Since
the redirection may be altered on occasion, the client SHOULD continue
to use the Request-URI for future
Fielding, et al [Page 65]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 requests. This response is only
cachable if indicated by a Cache-Control or Expires header field.
If the new URI is a location, its URL SHOULD be given by the Location
field in the response. Unless the request method was HEAD, the entity of
the response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s).
If the 302 status code is received in response to a request other than
GET or HEAD, the user agent MUST NOT automatically redirect the request
unless it can be confirmed by the user, since this might change the
conditions under which the request was issued.
Note: When automatically redirecting a POST request after receiving
a 302 status code, some existing HTTP/1.0 user agents will
erroneously change it into a GET request.
Note: RFC 1945 and RFC 2068 specify that the client should not
change the method on the redirected request. However, most existing
user agent implementations treat 302 as if it were a 303 response,
performing a GET on the Location field-value regardless of the
original request method. The status codes 303 and 307 have been
added for servers that wish to make unambiguously clear which kind
of reaction is expected of the client.
10.3.4 303 See Other
The response to the request can be found under a different URI and
SHOULD be retrieved using a GET method on that resource. This method
exists primarily to allow the output of a POST-activated script to
redirect the user agent to a selected resource. The new URI is not a
substitute reference for the originally requested resource. The 303
response is not cachable, but the response to the second (redirected)
request MAY be cachable.
Fielding, et al [Page 59]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
If the new URI is a location, its URL SHOULD be given by the Location
field in the response. Unless the request method was HEAD, the entity of
the response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s).
Note: Many pre-HTTP/1.1 user agents do not understand the 303
status. When interoperability with such clients is a concern, the
302 status code may be used instead, since most user agents react
to a 302 response as described here for 303.
10.3.5 304 Not Modified
If the client has performed a conditional GET request and access is
allowed, but the document has not been modified, modified , the server SHOULD
respond with this status code. The response MUST NOT contain a message-body. message-
body.
The response MUST include the following header fields:
. Date, unless its omission is required by section 14.19.1
If a clockless origin server obeys these rules, and proxies and
clients add their own Date to any response received without one (as
already specified by [RFC 2068], section 14.19), caches will operate
correctly.
Fielding, et al [Page 66]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
. ETag and/or Content-Location, if the header would have been sent in
a 200 response to the same request
. Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same variant
If the conditional GET used a strong cache validator (see section
13.3.3), the response SHOULD NOT include other entity-headers. Otherwise
(i.e., the conditional GET used a weak validator), the response MUST NOT
include other entity-
headers; entity-headers; this prevents inconsistencies between
cached entity-bodies and updated headers.
If a 304 response indicates an entity not currently cached, then the
cache MUST disregard the response and repeat the request without the
conditional.
If a cache uses a received 304 response to update a cache entry, the
cache MUST update the entry to reflect any new field values given in the
response.
The 304 response MUST NOT include a message-body, and thus is always
terminated by the first empty line after the header fields.
Fielding, et al [Page 60]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.3.6 305 Use Proxy
The 305 is generated by an origin server to indicate that requested resource MUST be accessed through the client, or proxy, should use a proxy to access given by the
requested resource.
Location field. The Location field gives the URL of the proxy. The
recipient is expected to repeat this single request SHOULD via the proxy. 305
responses MUST only be accompanied generated by origin servers.
10.3.7 307 Temporary Redirect
The requested resource resides temporarily under a Set-Proxy response
header indicating what proxy is to different URI. Since
the redirection may be used. The client will
parse altered on occasion, the Set-Proxy header as defined below client SHOULD continue
to decide how
long and for what URLs it should use the specified proxy.
If the 305 Request-URI for future requests. This response is not accompanied by a Set-Proxy
header, it MUST be accompanied only
cachable if indicated by a Location header. The
Location Cache-Control or Expires header will specify field.
If the new URI is a location, its URL to SHOULD be given by the proxy.
If both headers are present Location
field in the response, response. Unless the client
SHOULD only use request method was HEAD, the entity of
the Set-Proxy header only.
10.3.7 306 Switch Proxy
The 306 response is generated by SHOULD contain a proxy server short hypertext note with a hyperlink to indicate
that
the client or proxy should use new URI(s).
If the information 302 status code is received in the
accompanying Set-Proxy header response to choose a proxy for
subsequent requests.
The 306 response code request other than
GET or HEAD, the user agent MUST NOT automatically redirect the request
unless it can be accompanied confirmed by the Set-Proxy
response header. The client or proxy will parse user, since this might change the Set-
Fielding, et al [Page 67]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Proxy header to determine
conditions under which proxy to use, how long to
use it, and the request was issued.
Note: Many pre-HTTP/1.1 user agents do not understand the 307
status. An appropriate response entity should contain the
information necessary for which URLs a user to use it. repeat the original request on
the new URL.
10.4 Client Error 4xx
The scope 4xx class of status code is intended for cases in which the Set-Proxy header is considered an optional
advisory. The client or proxy may choose to ignore it, and
use it for just this request, for all requests, or for a
scope previously or implicitly defined by another
configuration method or autoconfiguration system.
10.4 Client Error 4xx
The 4xx class of status code is intended for cases in which
the client seems
seems to have erred. Except when responding to a HEAD request, the
server SHOULD include an entity containing an explanation of the error
situation, and whether it is a temporary or permanent condition. These
status codes are applicable to any request method. User agents SHOULD
display any included entity to the user.
Note: If the client is sending data, a server implementation using
TCP should be careful to ensure that the client acknowledges
receipt of the packet(s) containing the response, before the server
closes the input connection. If the client continues sending data
to the server after the close, the server's TCP stack will send a
reset packet to the client, which may erase the client's
unacknowledged input buffers before they can be read and
interpreted by the HTTP application.
Fielding, et al [Page 61]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.4.1 400 Bad Request
The request could not be understood by the server due to malformed
syntax. The client SHOULD NOT repeat the request without modifications.
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a
WWW-Authenticate header field (section 14.46) containing a challenge
applicable to the requested resource. The client MAY repeat the request
with a suitable Authorization header field (section 14.8). If the
request already included Authorization credentials, then the 401
response indicates that authorization has been refused for those
credentials. If the 401 response contains the same challenge as the
prior response, and the user agent has already attempted authentication
at least once, then the user SHOULD be presented the entity that was
given in the response, since that entity MAY include relevant diagnostic
Fielding, et al [Page 68]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
information. HTTP access authentication is explained in section 11.
10.4.3 402 Payment Required
This code is reserved for future use.
Editor's Note: Henrik Frystyk will be drafting language to
deal with 403 vs. 404. Issue. Current wording says:
Description for "404 Not found" says "403 Forbidden" can be
used instead. As Ari Luotonen points out - this should be
the other way round .
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated. If
the request method was not HEAD and the server wishes to make public why
the request has not been fulfilled, it SHOULD describe the reason for
the refusal in the entity. This status code is commonly used
when If the server does not wish to reveal exactly why make this
information available to the
request has been refused, or when no other response is
applicable. client, the status code 404 (Not Found)
can be used instead.
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No
indication is given of whether the condition is temporary or permanent. If the server does not wish to make this
information available to the client, the status code 403
(Forbidden) can be used instead.
The 410 (Gone) status code SHOULD be used if the server knows, through
some internally configurable mechanism, that an old resource is
permanently unavailable and has no forwarding address. This status code
is commonly used when the server does not wish to reveal exactly why the
request has been refused, or when no other response is applicable.
Fielding, et al [Page 62]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.4.6 405 Method Not Allowed
The method specified in the Request-Line is not allowed for the resource
identified by the Request-URI. The response MUST include an Allow header
containing a list of valid methods for the requested resource.
10.4.7 406 Not Acceptable
The resource identified by the request is only capable of generating
response entities which have content characteristics not acceptable
according to the accept headers sent in the request.
Fielding, et al [Page 69]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Unless it was a HEAD request, the response SHOULD include an entity
containing a list of available entity characteristics and location(s)
from which the user or user agent can choose the one most appropriate.
The entity format is specified by the media type given in the Content-Type Content-
Type header field. Depending upon the format and the capabilities of the
user agent, selection of the most appropriate choice may be performed
automatically. However, this specification does not define any standard
for such automatic selection.
Note: HTTP/1.1 servers are allowed to return responses which are
not acceptable according to the accept headers sent in the request.
In some cases, this may even be preferable to sending a 406
response. User agents are encouraged to inspect the headers of an
incoming response to determine if it is acceptable. If the response
could be unacceptable, a user agent SHOULD temporarily stop receipt
of more data and query the user for a decision on further actions.
10.4.8 407 Proxy Authentication Required
This code is similar to 401 (Unauthorized), but indicates that the
client MUST first authenticate itself with the
proxy. proxy . The proxy MUST
return a Proxy-Authenticate header field (section 14.33) containing a
challenge applicable to the proxy for the requested resource. The client
MAY repeat the request with a suitable Proxy-Authorization header field
(section 14.34). HTTP access authentication is explained in section 11.
10.4.9 408 Request Timeout
The client did not produce a request within the time that the server was
prepared to wait. The client MAY repeat the request without
modifications at any later time.
Fielding, et al [Page 63]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.4.10 409 Conflict
The request could not be completed due to a conflict with the current
state of the resource. resource . This code is only allowed in situations where it
is expected that the user might be able to resolve the conflict and
resubmit the request. The response body SHOULD include enough
information for the user to recognize the source of the conflict.
Ideally, the response entity would include enough information for the
user or user agent to fix the problem; however, that may not be possible
and is not required.
Conflicts are most likely to occur in response to a PUT request. If
versioning is being used and the entity being
Fielding, et al [Page 70]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 PUT includes changes to a
resource which conflict with those made by an earlier (third-party)
request, the server MAY use the 409 response to indicate that it can't
complete the request. In this case, the response entity SHOULD contain a
list of the differences between the two versions in a format defined by
the response Content-Type.
10.4.11 410 Gone
The requested resource is no longer available at the server and no
forwarding address is known. This condition SHOULD be considered
permanent. Clients with link editing capabilities SHOULD delete
references to the Request-URI after user approval. If the server does
not know, or has no facility to determine, whether or not the condition
is permanent, the status code 404 (Not Found) SHOULD be used instead.
This response is cachable unless indicated otherwise.
The 410 response is primarily intended to assist the task of web
maintenance by notifying the recipient that the resource is
intentionally unavailable and that the server owners desire that remote
links to that resource be removed. Such an event is common for limited-time, limited-
time, promotional services and for resources belonging to individuals no
longer working at the server's site. It is not necessary to mark all
permanently unavailable resources as "gone" or to keep the mark for any
length of time -- that is left to the discretion of the server owner.
10.4.12 411 Length Required
The server refuses to accept the request without a defined
Content-Length. Content-
Length. The client MAY repeat the request if it adds a valid Content-Length Content-
Length header field containing the length of the message-body in the
request message.
Fielding, et al [Page 64]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.4.13 412 Precondition Failed
The precondition given in one or more of the request-header fields
evaluated to false when it was tested on the server. This response code
allows the client to place preconditions on the current resource
metainformation (header field data) and thus prevent the requested
method from being applied to a resource other than the one intended.
10.4.14 413 Request Entity Too Large
The server is refusing to process a request because the request entity
is larger than the server is willing or able
Fielding, et al [Page 71]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 to process. process . The server may
close the connection to prevent the client from continuing the request.
If the condition is temporary, the server SHOULD include a Retry-After
header field to indicate that it is temporary and after what time the
client may try again.
10.4.15 414 Request-URI Too Long
The server is refusing to service the request because the Request-URI is
longer than the server is willing to
interpret. interpret . This rare condition is
only likely to occur when a client has improperly converted a POST
request to a GET request with long query information, when the client
has descended into a URL "black hole" of redirection (e.g., a redirected
URL prefix that points to a suffix of itself), or when the server is
under attack by a client attempting to exploit security holes present in
some servers using fixed-
length fixed-length buffers for reading or manipulating the
Request-URI.
10.4.16 415 Unsupported Media Type
The server is refusing to service the request because the entity of the
request is in a format not supported by the requested resource for the
requested method.
10.4.17 416 Requested range not valid satisfiable
A server SHOULD return a response with this status code if a request
included a Range request-header field (section
14.36), 14.36) , and none of the
range-specifier values in this field overlap the current extent of the
selected resource, and the request did not include an If-Range request-header request-
header field. (For byte-ranges, this means that the first-byte-pos of
all of the byte-range-spec values were greater than the current length
of the selected resource.)
Fielding, et al [Page 65]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
When this status code is returned for a byte-range request, the response
MUST include a Content-Range entity-header field specifying the current
length of the selected resource (see section 14.17). This response MUST
NOT use the multipart/byteranges content-type.
10.4.18 419 417 Expectation Failed
The expectation given in an Expect request-header field (see section
14.47) could not be met by this server, or, if the server is a proxy,
the server has unambiguous evidence that the request could not be met by
the next-hop server
Fielding, et al [Page 72]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
10.5 Server Error 5xx
Response status codes beginning with
10.4.19 418 Reauthentication Required
Editor's note: I wonder if the digit "5" indicate
cases user agent should not actually be client
in which this and the server following sections
This header is aware similar to 401 (Unauthorized), except that it has erred or is
incapable of performing the request. Except when responding
to a HEAD request, user agent
MUST request credentials from the server SHOULD include an entity
containing an explanation of user before resubmitting the error situation, and
whether it request,
even if the challenge is the same as on a temporary prior response or permanent condition. User
agents SHOULD display any included entity to if the user
agent has already obtained credentials from the user. These
response codes The user agent
should not assume that the current credentials are applicable to any invalid if the
request method.
10.5.1 500 Internal Server Error
The server encountered contained an unexpected condition which
prevented it from fulfilling the request.
10.5.2 501 Not Implemented Authorization header. The server does not support can use this
status code to cause the functionality required browser to
fulfill verify that the request. This current user is the appropriate response when
same as the server does not recognize one who supplied the request method and is not
capable original credentials (say, after a
period of supporting it for any resource.
10.5.3 502 Bad Gateway inactivity). The server, while acting as a gateway or proxy, received server SHOULD send an
invalid response from entity-body explaining
the upstream server it accessed in
attempting to fulfill reason for requiring reauthentication, because user agents that do
not understand the status code will treat it as a generic 400 error and
display the message. See section 15.11 for security considerations
involving idle clients.
10.4.20 419 Proxy Reauthentication Required
This header is similar to 407 (Proxy Authentication Required), except
that the user agent MUST request credentials from the user before
resubmitting the request, even if the challenge is the same as on a
prior response or if the user agent has already obtained credentials
from the user. The user agent should not assume that the current
credentials are invalid if the request contained an Proxy-Authorization
header. The server can use this status code to cause the browser to
verify that the current user is the same as the one who supplied the
original credentials (say, after a period of inactivity). The server
SHOULD send an entity-body explaining the reason for requiring
reauthentication, because user agents that do not understand the status
code will treat it as a generic 400 error and display the message. See
section 15.11 for security considerations involving idle clients.
Fielding, et al [Page 66]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
10.5 Server Error 5xx
Response status codes beginning with the digit "5" indicate cases in
which the server is aware that it has erred or is incapable of
performing the request. Except when responding to a HEAD request, the
server SHOULD include an entity containing an explanation of the error
situation, and whether it is a temporary or permanent condition. User
agents SHOULD display any included entity to the user. These response
codes are applicable to any request method.
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from
fulfilling the request.
10.5.2 501 Not Implemented
The server does not support the functionality required to fulfill the
request. This is the appropriate response when the server does not
recognize the request method and is not capable of supporting it for any
resource.
10.5.3 502 Bad Gateway
The server, while acting as a gateway or proxy, received an invalid
response from the upstream server it accessed in attempting to fulfill
the request.
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary
overloading or maintenance of the server. The implication is that this
is a temporary condition which will be alleviated after some delay. If
known, the length of the delay may be indicated in a Retry-After header.
If no Retry-
After Retry-After is given, the client SHOULD handle the response as it
would for a 500 response.
Note: The existence of the 503 status code does not imply that a
server must use it when becoming overloaded. Some servers may wish
to simply refuse the connection.
10.5.5 504 Gateway Timeout
The server, while acting as a gateway or proxy, did not receive a timely
response from the upstream server it accessed in attempting to complete
the request.
Fielding, et al [Page 73] 67]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
10.5.6 505 HTTP Version Not Supported
The server does not support, or refuses to support, the HTTP protocol
version that was used in the request message. The server is indicating
that it is unable or unwilling to complete the request using the same
major version as the client, as described in section 3.1, other than
with this error message. The response SHOULD contain an entity
describing why that version is not supported and what other protocols
are supported by that server.
10.5.7 506 Redirection Failed Partial Update Not Implemented
The 506 response is returned when a redirection fails or is
refused by a proxy or client. If the redirection response
included a body, then it SHOULD be included in the 506
response.
This response is returned by a proxy, to a downstream proxy
or client, when it cannot or chooses server does not to honor a
redirection. support paritial update on the specified resource.
11 Access Authentication
Editor's note: This section (11) will be removed from future
drafts of this document, and combined with Digest
authentication, which will then become a more general
document "Authentication in HTTP".
HTTP provides a simple several optional challenge-response authentication
mechanism which MAY be used by a server to challenge a client request
and by a client to provide authentication information. It uses an extensible, case-insensitive token
to identify the authentication scheme, followed by a comma-
separated list of attribute-value pairs which carry the
parameters necessary The general
framework for achieving access authentication, and specification of "basic" and
"digest" authentication via that
scheme.
auth-scheme = token
auth-param = token "=" quoted-string
The 401 (Unauthorized) response message are specified in RFC XAAA .[
11.1 Digest Authentication
A digest authentication for HTTP is used by specified in RFC 2069 [32] Scheme
12 Content Negotiation
Most HTTP responses include an origin
server to challenge the authorization of a user agent. This
response MUST include entity which contains information for
interpretation by a WWW-Authenticate header field
containing at least one challenge applicable human user. Naturally, it is desirable to supply the
requested resource. The 407 (Proxy Authentication Required)
response message is used by a proxy
user with the "best available" entity corresponding to challenge the
authorization of a client request.
Unfortunately for servers and MUST include a Proxy-
Authenticate header field containing a challenge applicable
to caches, not all users have the proxy same
preferences for what is "best," and not all user agents are equally
capable of rendering all entity types. For that reason, HTTP has
provisions for several mechanisms for "content negotiation" -- the requested resource.
process of selecting the best representation for a given response when
there are multiple representations available.
Note: This is not called "format negotiation" because the alternate
representations may be of the same media type, but use different
capabilities of that type, be in different languages, etc.
Any response containing an entity-body MAY be subject to negotiation,
including error responses.
There are two kinds of content negotiation which are possible in HTTP:
server-driven and agent-driven negotiation. These two kinds of
Fielding, et al [Page 74] 68]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
challenge = auth-scheme 1*SP realm *( "," auth-
param )
realm = "realm" "=" realm-value
realm-value = quoted-string
The realm attribute (case-insensitive) is required for all
authentication schemes which issue a challenge. The realm
value (case-sensitive),
negotiation are orthogonal and thus may be used separately or in combination with the canonical
root URL (see section 5.1.2)
combination. One method of the server being accessed,
defines the protection space. These realms allow the
protected resources on a server combination, referred to be partitioned into a set
of protection spaces, each with its own authentication
scheme and/or authorization database. The realm value is as transparent
negotiation, occurs when a
string, generally assigned cache uses the agent-driven negotiation
information provided by the origin server, which may
have additional semantics specific server in order to provide server-
driven negotiation for subsequent requests.
12.1 Server-driven Negotiation
If the authentication
scheme.
A user agent that wishes to authenticate itself with an
origin server--usually, but not necessarily, after receiving selection of the best representation for a 401 (Unauthorized)--MAY do so response is made by including an
Authorization header field with
algorithm located at the request. A client that
wishes to authenticate itself with a proxy--usually, but not
necessarily, after receiving a 407 (Proxy Authentication
Required)--MAY do so by including a Proxy-Authoraiztion
header field with server, it is called server-driven negotiation.
Selection is based on the request. Both available representations of the Authorization field
value response (the
dimensions over which it can vary; e.g. language, content-coding, etc.)
and the Proxy-Authorization field value consists contents of
credentials containing particular header fields in the authentication request message or
on other information of pertaining to the
client for request (such as the realm network
address of the resource being requested.
credentials = basic-credentials
| auth-scheme #auth-param
The domain over which credentials can be automatically
applied by a client client).
Server-driven negotiation is determined by the protection space.
If a prior request has been authorized, advantageous when the same credentials
MAY be reused for all other requests within that protection
space algorithm for a period of time determined by
selecting from among the authentication
scheme, parameters, and/or user preference. Unless otherwise
defined by available representations is difficult to
describe to the authentication scheme, a single protection
space cannot extend outside user agent, or when the scope of its server.
If the origin server does not wish desires to send its "best
guess" to accept the credentials
sent client along with a request, it SHOULD return a 401 (Unauthorized)
response. The the first response MUST include a WWW-Authenticate
header field containing at least one (possibly new)
challenge applicable (hoping to avoid the requested resource. If
round-trip delay of a proxy
does not accept subsequent request if the credentials sent with a request, it
SHOULD return a 407 (Proxy Authentication Required). The
response MUST "best guess" is good
enough for the user). In order to improve the server's guess, the user
agent MAY include a Proxy-Authenticate request header field
containing fields (Accept, Accept-Language,
Accept-Encoding, etc.) which describe its preferences for such a (possibly new) challenge applicable to the
proxy
response.
Server-driven negotiation has disadvantages:
1. It is impossible for the requested resource.
Fielding, et al [Page 75]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The HTTP protocol does not restrict applications server to this
simple challenge-response mechanism for access
authentication. Additional mechanisms MAY accurately determine what might
be used, such as
encryption at "best" for any given user, since that would require complete
knowledge of both the capabilities of the transport level or via message
encapsulation, and with additional header fields specifying
authentication information. However, these additional
mechanisms are not defined by this specification.
Proxies MUST be completely transparent regarding user agent
authentication by origin servers. That is, they MUST forward
the WWW-Authenticate and Authorization headers untouched, and follow the rules found in section 14.8. Both
intended use for the Proxy-
Authenticate and response (e.g., does the Proxy-Authorization header fields are
hop-by-hop headers (see section 13.5.1).
11.1 Basic Authentication Scheme
The "basic" authentication scheme is based user want to view it
on screen or print it on paper?).
2. Having the model that
the client must authenticate itself with a user-ID and a
password for each realm. The realm value should be
considered an opaque string which user agent describe its capabilities in every request
can only be compared for
equality with other realms on both very inefficient (given that server. The server will
service the request only if it can validate the user-ID a small percentage of
responses have multiple representations) and
password for the protection space a potential violation
of the Request-URI. There
are no optional authentication parameters.
Upon receipt user's privacy.
3. It complicates the implementation of an unauthorized request for a URI within the
protection space, the origin server MAY respond with a
challenge like the following:
WWW-Authenticate: Basic realm="WallyWorld"
where "WallyWorld" is the string assigned by and the server
algorithms for generating responses to
identify the protection space of the Request-URI. A proxy a request.
4. It may respond with limit a public cache's ability to use the same challenge using the Proxy-
Authenticate header field.
To receive authorization, the client sends the userid and
password, separated by a single colon (":") character,
within a base64 [7] encoded string in response for
multiple user's requests.
HTTP/1.1 includes the credentials.
basic-credentials = "Basic" SP base64-user-pass
base64-user-pass = <base64 [7] encoding following request-header fields for enabling
server-driven negotiation through description of user-pass,
except user agent capabilities
and user preferences: Accept (section 14.1), Accept-Charset (section
14.2), Accept-Encoding (section 14.3), Accept-Language (section 14.4),
and User-Agent (section 14.42). However, an origin server is not limited to 76 char/line>
user-pass = userid ":" password
userid = *<TEXT excluding ":">
Fielding, et al [Page 76] 69]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
password = *TEXT
Userids might be case sensitive.
If the user agent wishes
to send the userid "Aladdin" these dimensions and
password "open sesame", it would use MAY vary the following header
field:
Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==
If a client wishes to send response based on any aspect of the same userid and password to a
proxy, it would use
request, including information outside the Proxy-Authorization request-header fields or
within extension header field.
See section 15 for security considerations associated with
Basic authentication.
11.2 Digest Authentication Scheme
A digest authentication for HTTP is specified in RFC 2069
[32].
12 Content Negotiation
Most HTTP responses include an entity which contains
information for interpretation fields not defined by a human user. Naturally,
it is desirable this specification.
The Vary header field can be used to supply the user with express the "best available"
entity corresponding parameters used to the request. Unfortunately for
servers and caches, not all users have the same preferences
for what is "best," and not all user agents are equally
capable of rendering all entity types. For that reason, HTTP
has provisions for several mechanisms for "content
negotiation" -- the process of selecting the best
representation for
select a given response when there are multiple
representations available.
Note: This is not called "format negotiation" because
the alternate representations may be of the same media
type, but use different capabilities of that type, be
in different languages, etc.
Any response containing an entity-body MAY be representation subject to
negotiation, including error responses.
There are two kinds of content negotiation which are
possible in HTTP: server-driven and agent-driven negotiation. These two kinds See
section 13.6 for use of negotiation are orthogonal the Vary header field by caches and thus may be used separately or in combination. One
method section
14.43 for use of combination, referred to as transparent
negotiation, occurs when a cache uses the agent-driven
negotiation information provided Vary header field by the origin server in
order to provide server-driven negotiation for subsequent
requests.
Fielding, et al [Page 77]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
12.1 Server-driven servers.
12.2 Agent-driven Negotiation
If the
With agent-driven negotiation, selection of the best representation for
a response is made performed by the user agent after receiving an algorithm located at initial
response from the server, it is called
server-driven negotiation. origin server. Selection is based on a list of the
available representations of the response (the dimensions
over which it can vary; e.g. language, content-coding, etc.)
and included within the contents of particular header
fields in the request
message or on other information pertaining to (this specification reserves the request
(such field-name Alternates, as the network address
described in appendix Error! Reference source not found.) or entity-body
of the client).
Server-driven negotiation is advantageous when the algorithm
for selecting initial response, with each representation identified by its own
URI. Selection from among the available representations may be performed
automatically (if the user agent is
difficult to describe to capable of doing so) or manually by
the user agent, selecting from a generated (possibly hypertext) menu.
Agent-driven negotiation is advantageous when the response would vary
over commonly-used dimensions (such as type, language, or encoding),
when the origin server
desires to send its "best guess" is unable to determine a user agent's
capabilities from examining the client along with
the first response (hoping request, and generally when public
caches are used to avoid distribute server load and reduce network usage.
Agent-driven negotiation suffers from the round-trip delay disadvantage of needing a subsequent
second request if the "best guess" is good enough for
the user). In order to improve the server's guess, obtain the user
agent MAY include request header fields (Accept, Accept-
Language, Accept-Encoding, etc.) which describe its
preferences for such a response.
Server-driven negotiation has disadvantages:
1.It is impossible for the server to accurately determine
what might be "best" for any given user, since that
would require complete knowledge of both the
capabilities of the user agent and the intended use for
the response (e.g., does the user want to view it on
screen or print it on paper?).
2.Having the user agent describe its capabilities in
every request can be both very inefficient (given that
only a small percentage of responses have multiple
representations) and a potential violation of the
user's privacy.
3.It complicates the implementation of an origin server
and the algorithms for generating responses to a
request.
4.It may limit a public cache's ability to use the same
response for multiple user's requests.
HTTP/1.1 includes the following request-header fields for
enabling server-driven negotiation through description of
user agent capabilities and user preferences: Accept
(section 14.1), Accept-Charset (section 14.2), Accept-
Encoding (section 14.3), Accept-Language (section 14.4), and
User-Agent (section 14.42). However, an origin server is not
limited to these dimensions and MAY vary the response based
on any aspect of the request, including information outside
the request-header fields or within extension header fields
not defined by this specification.
Fielding, et al [Page 78]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
HTTP/1.1 origin servers MUST include an appropriate Vary
header field (section 14.43) in any cachable response based
on server-driven negotiation. The Vary header field
describes the dimensions over which the response might vary
(i.e. the dimensions over which the origin server picks its
"best guess" response from multiple representations).
HTTP/1.1 public caches MUST recognize the Vary header field
when it is included in a response and obey the requirements
described in section 13.6 that describes the interactions
between caching and content negotiation.
12.2 Agent-driven Negotiation
With agent-driven negotiation, selection of the best
representation for a response is performed by the user agent
after receiving an initial response from the origin server.
Selection is based on a list of the available
representations of the response included within the header
fields (this specification reserves the field-name
Alternates, as described in appendix 19.6.1.0) or entity-
body of the initial response, with each representation
identified by its own URI. Selection from among the
representations may be performed automatically (if the user
agent is capable of doing so) or manually by the user
selecting from a generated (possibly hypertext) menu.
Agent-driven negotiation is advantageous when the response
would vary over commonly-used dimensions (such as type,
language, or encoding), when the origin server is unable to
determine a user agent's capabilities from examining the
request, and generally when public caches are used to
distribute server load and reduce network usage.
Agent-driven negotiation suffers from the disadvantage of
needing a second request to obtain the best alternate
representation. This second best alternate representation. This second
request is only efficient when caching is used. In addition, this
specification does not define any mechanism for supporting automatic
selection, though it also does not prevent any such mechanism from being
developed as an extension and used within HTTP/1.1.
HTTP/1.1 defines the 300 (Multiple Choices) and 406 (Not Acceptable)
status codes for enabling agent-driven negotiation when the server is
unwilling or unable to provide a varying response using server-driven
negotiation.
12.3 Transparent Negotiation
Transparent negotiation is a combination of both server-
driven server-driven and
agent-driven negotiation. When a cache is supplied with a form of the
list of available
Fielding, et al [Page 79]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 representations of the response (as in agent-driven
negotiation) and the dimensions of variance are completely understood by
the cache, then the cache becomes capable of performing server-driven
negotiation on behalf of the origin server for subsequent requests on
that resource.
Fielding, et al [Page 70]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Transparent negotiation has the advantage of distributing the
negotiation work that would otherwise be required of the origin server
and also removing the second request delay of agent-driven negotiation
when the cache is able to correctly guess the right response.
This specification does not define any mechanism for transparent
negotiation, though it also does not prevent any such mechanism from
being developed as an extension and used within HTTP/1.1. An HTTP/1.1 cache performing transparent
negotiation MUST include a Vary header field
13 Caching in the response
(defining the dimensions of its variance) if it is cachable
to ensure correct interoperation with all HTTP/1.1 clients.
The agent-driven negotiation information supplied by the
origin server SHOULD be included with the transparently
negotiated response.
13 Caching in HTTP
HTTP HTTP
HTTP is typically used for distributed information systems, where
performance can be improved by the use of response caches. The HTTP/1.1
protocol includes a number of elements intended to make caching work as
well as possible. Because these elements are inextricable from other
aspects of the protocol, and because they interact with each other, it
is useful to describe the basic caching design of HTTP separately from
the detailed descriptions of methods, headers, response codes, etc.
Caching would be useless if it did not significantly improve
performance. The goal of caching in HTTP/1.1 is to eliminate the need to
send requests in many cases, and to eliminate the need to send full
responses in many other cases. The former reduces the number of network
round-trips required for many operations; we use an "expiration"
mechanism for this purpose (see section 13.2). The latter reduces
network bandwidth requirements; we use a "validation" mechanism for this
purpose (see section 13.3).
Requirements for performance, availability, and disconnected operation
require us to be able to relax the goal of semantic transparency. The
HTTP/1.1 protocol allows origin servers, caches, and clients to
explicitly reduce transparency when necessary. However, because non-
transparent operation may confuse non-expert users, and may be
incompatible with certain server applications (such as
Fielding, et al [Page 80]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 those for
ordering merchandise), the protocol requires that transparency be
relaxed
. only by an explicit protocol-level request when relaxed by client
or origin server
. only with an explicit warning to the end user when relaxed by cache
or client
Therefore, the HTTP/1.1 protocol provides these important elements:
1.Protocol
1. Protocol features that provide full semantic transparency when this
is required by all parties.
2.Protocol
2. Protocol features that allow an origin server or user agent to
explicitly request and control non-transparent operation.
3.Protocol
Fielding, et al [Page 71]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
3. Protocol features that allow a cache to attach warnings to
responses that do not preserve the requested approximation of
semantic transparency.
A basic principle is that it must be possible for the clients to detect
any potential relaxation of semantic transparency.
Note: The server, cache, or client implementer may be faced with
design decisions not explicitly discussed in this specification. If
a decision may affect semantic transparency, the implementer ought
to err on the side of maintaining transparency unless a careful and
complete analysis shows significant benefits in breaking
transparency.
13.1.1 Cache Correctness
A correct cache MUST respond to a request with the most up-
to-date up-to-date
response held by the cache that is appropriate to the request (see
sections 13.2.5, 13.2.6, and 13.12) which meets one of the following
conditions:
1.It
1. It has been checked for equivalence with what the origin server
would have returned by revalidating the response with the origin
server (section 13.3);
2.It
2. It is "fresh enough" (see section 13.2). In the default case, this
means it meets the least restrictive freshness requirement of the
client, origin server, and cache (see section 14.9); if the origin
server so specifies, it is the freshness requirement of the origin
server alone.
If a stored response is not "fresh enough" by the most restrictive
freshness requirement of both the client
Fielding, et al [Page 81]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 and the origin server, in
carefully considered circumstances the cache may still return the
response with the appropriate Warning header (see section 13.1.5
and 14.45), unless such a response is prohibited (e.g., by a "no-store" "no-
store" cache-directive, or by a "no-cache" cache-request-directive;
see section 14.9). \*
MERGEFORMAT \* MERGEFORMAT
3.It
3. It is an appropriate 304 (Not Modified), 305 (Proxy Redirect), or
error (4xx or 5xx) response message.
If the cache can not communicate with the origin server, then a correct
cache SHOULD respond as above if the response can be correctly served
from the cache; if not it MUST return an error or warning indicating
that there was a communication failure.
If a cache receives a response (either an entire response, or a 304 (Not
Modified) response) that it would normally forward to the requesting
client, and the received response is no longer fresh, the cache SHOULD
Fielding, et al [Page 72]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
forward it to the requesting client without adding a new Warning (but
without removing any existing Warning headers). A cache SHOULD NOT
attempt to revalidate a response simply because that response became
stale in transit; this might lead to an infinite loop. An user agent
that receives a stale response without a Warning MAY display a warning
indication to the user.
13.1.2 Warnings
Whenever a cache returns a response that is neither first-
hand first-hand nor
"fresh enough" (in the sense of condition 2 in section 13.1.1), it must
attach a warning to that effect, using a Warning response-header. This
warning allows clients to take appropriate action.
Warnings may be used for other purposes, both cache-related and
otherwise. The use of a warning, rather than an error status code,
distinguish these responses from true failures.
Warnings come in two categories:
1.Those
1. Those that describe the freshness or revalidation status of the
response, and so MUST be deleted after a successful revalidation
(see section 13.3 for a definition of revalidation).
2.Those
2. Those that describe some aspect of the entity body or entity
headers that are not rectified by a revalidation; for example, a
lossy compression of the entity bodys. These warnings MUST NOT be
deleted after a successful revalidation.
Fielding, et al [Page 82]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Warnings are assigned 3-digit code numbers. The first digit indicates
whether the Warning must or must not be deleted from a cached response
after it is successfully revalidated. This specification defines the
code numbers and meanings of each currently assigned warning, allowing a
client or cache to take automated action in some (but not all) cases.
HTTP/1.0 caches will cache all Warnings, without deleting the ones in
the first category. Warnings that are passed to HTTP/1.0 caches carry
an extra warning-date field, which prevents a future HTTP/1.1 recipient
from believing an erroneously cached Warning.
Warnings also carry a warning text. The text may be in any appropriate
natural language (perhaps based on the client's Accept headers), and
include an optional indication of what character set is used.
Multiple warnings may be attached to a response (either by the origin
server or by a cache), including multiple warnings with the same code
number. For example, a server may provide the same warning with texts in
both English and Basque.
Fielding, et al [Page 73]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
When multiple warnings are attached to a response, it may not be
practical or reasonable to display all of them to the user. This version
of HTTP does not specify strict priority rules for deciding which
warnings to display and in what order, but does suggest some heuristics.
The Warning header and the currently defined warnings are described in
section 14.45.
13.1.3 Cache-control Mechanisms
The basic cache mechanisms in HTTP/1.1 (server-specified expiration
times and validators) are implicit directives to caches. In some cases,
a server or client may need to provide explicit directives to the HTTP
caches. We use the Cache-Control header for this purpose.
The Cache-Control header allows a client or server to transmit a variety
of directives in either requests or responses. These directives
typically override the default caching algorithms. As a general rule, if
there is any apparent conflict between header values, the most
restrictive interpretation should be applied (that is, the one that is
most likely to preserve semantic transparency). However, in some cases,
Cache-Control directives are explicitly specified as weakening the
approximation of semantic transparency (for example, "max-stale" or
"public").
Fielding, et al [Page 83]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The Cache-Control directives are described in detail in section 14.9.
13.1.4 Explicit User Agent Warnings
Many user agents make it possible for users to override the basic
caching mechanisms. For example, the user agent may allow the user to
specify that cached entities (even explicitly stale ones) are never
validated. Or the user agent might habitually add "Cache-Control: max-stale=3600" max-
stale=3600" to every request. The user should have to explicitly request
either non-transparent behavior, or behavior that results in abnormally
ineffective caching.
If the user has overridden the basic caching mechanisms, the user agent
should explicitly indicate to the user whenever this results in the
display of information that might not meet the server's transparency
requirements (in particular, if the displayed entity is known to be
stale). Since the protocol normally allows the user agent to determine
if responses are stale or not, this indication need only be displayed
when this actually happens. The indication need not be a dialog box; it
could be an icon (for example, a picture of a rotting fish) or some
other visual indicator.
If the user has overridden the caching mechanisms in a way that would
abnormally reduce the effectiveness of caches, the user agent should
Fielding, et al [Page 74]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
continually display an indication (for example, a picture of currency in
flames) so that the user does not inadvertently consume excess resources
or suffer from excessive latency.
13.1.5 Exceptions to the Rules and Warnings
In some cases, the operator of a cache may choose to configure it to
return stale responses even when not requested by clients. This decision
should not be made lightly, but may be necessary for reasons of
availability or performance, especially when the cache is poorly
connected to the origin server. Whenever a cache returns a stale
response, it MUST mark it as such (using a Warning header). This allows
the client software to alert the user that there may be a potential
problem.
It also allows the user agent to take steps to obtain a first-hand or
fresh response. For this reason, a cache
SHOULD NOT should not return a stale
response if the client explicitly requests a first-hand or fresh one,
unless it is impossible to comply for technical or policy reasons.
Fielding, et al [Page 84]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
13.1.6 Client-controlled Behavior
While the origin server (and to a lesser extent, intermediate caches, by
their contribution to the age of a response) are the primary source of
expiration information, in some cases the client may need to control a
cache's decision about whether to return a cached response without
validating it. Clients do this using several directives of the Cache-Control Cache-
Control header.
A client's request may specify the maximum age it is willing to accept
of an unvalidated response; specifying a value of zero forces the
cache(s) to revalidate all responses. A client may also specify the
minimum time remaining before a response expires. Both of these options
increase constraints on the behavior of caches, and so cannot further
relax the cache's approximation of semantic transparency.
A client may also specify that it will accept stale responses, up to
some maximum amount of staleness. This loosens the constraints on the
caches, and so may violate the origin server's specified constraints on
semantic transparency, but may be necessary to support disconnected
operation, or high availability in the face of poor connectivity.
Fielding, et al [Page 75]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
13.2 Expiration Model
13.2.1 Server-Specified Expiration
HTTP caching works best when caches can entirely avoid making requests
to the origin server. The primary mechanism for avoiding requests is for
an origin server to provide an explicit expiration time in the future,
indicating that a response may be used to satisfy subsequent requests.
In other words, a cache can return a fresh response without first
contacting the server.
Our expectation is that servers will assign future explicit expiration
times to responses in the belief that the entity is not likely to
change, in a semantically significant way, before the expiration time is
reached. This normally preserves semantic transparency, as long as the
server's expiration times are carefully chosen.
The expiration mechanism applies only to responses taken from a cache
and not to first-hand responses forwarded immediately to the requesting
client.
If an origin server wishes to force a semantically transparent cache to
validate every request, it may assign an explicit expiration time in the
past. This means that the
Fielding, et al [Page 85]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 response is always stale, and so the cache
SHOULD validate it before using it for subsequent requests. See section
14.9.4 for a more restrictive way to force revalidation.
If an origin server wishes to force any HTTP/1.1 cache, no matter how it
is configured, to validate every request, it should use the "must-revalidate" "must-
revalidate" Cache-Control directive (see section 14.9).
Servers specify explicit expiration times using either the Expires
header, or the max-age directive of the Cache-
Control Cache-Control header.
An expiration time cannot be used to force a user agent to refresh its
display or reload a resource; its semantics apply only to caching
mechanisms, and such mechanisms need only check a resource's expiration
status when a new request for that resource is initiated. See section
13.13 for explanation of the difference between caches and history
mechanisms.
13.2.2 Heuristic Expiration
Since origin servers do not always provide explicit expiration times,
HTTP caches typically assign heuristic expiration times, employing
algorithms that use other header values (such as the Last-Modified time)
to estimate a plausible expiration time. The HTTP/1.1 specification does
not provide specific algorithms, but does impose worst-case constraints
on their results. Since heuristic expiration times may compromise
Fielding, et al [Page 76]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
semantic transparency, they should be used cautiously, and we encourage
origin servers to provide explicit expiration times as much as possible.
13.2.3 Age Calculations
In order to know if a cached entry is fresh, a cache needs to know if
its age exceeds its freshness lifetime. We discuss how to calculate the
latter in section 13.2.4; this section describes how to calculate the
age of a response or cache entry.
In this discussion, we use the term "now" to mean "the current value of
the clock at the host performing the calculation." Hosts that use HTTP,
but especially hosts running origin servers and caches, should use NTP
[28] or some similar protocol to synchronize their clocks to a globally
accurate time standard.
Also note that HTTP/1.1 requires origin servers to send a Date header
with every response, giving the time at which the response was
generated. We use the term "date_value" to
Fielding, et al [Page 86]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 denote the value of the Date
header, in a form appropriate for arithmetic operations.
HTTP/1.1 uses the Age response-header to help HTTP/1.1 uses the Age response-
header to convey the estimated age
information between caches. of the response message when obtained
from a cache. The Age header field value is the
sender's cache's estimate of the amount
of time since the response was generated at the origin server. In the case of a cached
response that has been or revalidated with by the origin server,
the Age value is based on the time of revalidation, not of
the original response.
server.
In essence, the Age value is the sum of the time that the response has
been resident in each of the caches along the path from the origin
server, plus the amount of time it has been in transit along network
paths.
We use the term "age_value" to denote the value of the Age header, in a
form appropriate for arithmetic operations.
A response's age can be calculated in two entirely independent ways:
1.now
1. now minus date_value, if the local clock is reasonably well
synchronized to the origin server's clock. If the result is
negative, the result is replaced by zero.
2.age_value,
2. age_value, if all of the caches along the response path implement
HTTP/1.1.
Given that we have two independent ways to compute the age of a response
when it is received, we can combine these as
corrected_received_age = max(now - date_value, age_value)
and as long as we have either nearly synchronized clocks or all-HTTP/1.1
paths, one gets a reliable (conservative) result.
Note that this correction is applied at each
Fielding, et al [Page 77]
INTERNET-DRAFT HTTP/1.1 cache
along the path, so that if there is an HTTP/1.0 cache in the
path, the correct received age is computed as long as the
receiving cache's clock is nearly in sync. We don't need
end-to-end clock synchronization (although it is good to
have), and there is no explicit clock synchronization step. Friday, November 21, 1997
Because of network-imposed delays, some significant interval may pass
from the time that a server generates a response and the time it is
received at the next outbound cache or client. If uncorrected, this
delay could result in improperly low ages.
Because the request that resulted in the returned Age value must have
been initiated prior to that Age value's
Fielding, et al [Page 87]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 generation, we can correct for
delays imposed by the network by recording the time at which the request
was initiated. Then, when an Age value is received, it MUST be
interpreted relative to the time the request was initiated, not the time
that the response was received. This algorithm results in conservative
behavior no matter how much delay is experienced. So, we compute:
corrected_initial_age = corrected_received_age
+ (now - request_time)
where "request_time" is the time (according to the local clock) when the
request that elicited this response was sent.
Summary of age calculation algorithm, when a cache receives a response:
/*
* age_value
* is the value of Age: header received by the cache with
* this response.
* date_value
* is the value of the origin server's Date: header
* request_time
* is the (local) time when the cache made the request
* that resulted in this cached response
* response_time
* is the (local) time when the cache received the
* response
* now
* is the current (local) time
*/
apparent_age = max(0, response_time - date_value);
corrected_received_age = max(apparent_age, age_value);
response_delay = response_time - request_time;
corrected_initial_age = corrected_received_age + response_delay;
resident_time = now - response_time;
current_age = corrected_initial_age + resident_time;
When
The current_age of a cache sends a response, it must add to the
corrected_initial_age entry is calculated by adding the amount of
time that (in seconds) since the response cache entry was resident locally. It must then transmit this total age,
using last validated by the Age header, origin
server to the next recipient cache.
Note that a client cannot reliably tell that corrected_initial_age. hen a response is first-hand, but generated from a
cache entry, the server must include a single Age header field in the
response with a value equal to the cache entry's current_age.
The presence of an Age header
indicates field in a response implies that a
response is definitely not first-hand.
Also, if However, the Date converse is not true, since the
lack of an Age header field in a response does not imply that the
response is earlier than first-hand unless all caches along the request path are
Fielding, et al [Page 88] 78]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
client's local request time, the response is probably
compliant with HTTP/1.1 (i.e., older HTTP caches did not first-hand (in implement the absence of serious clock skew).
Age header field).
13.2.4 Expiration Calculations
In order to decide whether a response is fresh or stale, we need to
compare its freshness lifetime to its age. The age is calculated as
described in section 13.2.3; this section describes how to calculate the
freshness lifetime, and to determine if a response has expired. In the
discussion below, the values can be represented in any form appropriate
for arithmetic operations.
We use the term "expires_value" to denote the value of the Expires
header. We use the term "max_age_value" to denote an appropriate value
of the number of seconds carried by the max-age directive of the Cache-Control Cache-
Control header in a response (see section 14.10.
The max-age directive takes priority over Expires, so if max-age is
present in a response, the calculation is simply:
freshness_lifetime = max_age_value
Otherwise, if Expires is present in the response, the calculation is:
freshness_lifetime = expires_value - date_value
Note that neither of these calculations is vulnerable to clock skew,
since all of the information comes from the origin server.
If neither Expires nor Cache-Control: max-age or s-maxage (see section
14.9.3) appears in the response, and the response does not include other
restrictions on caching, the cache MAY compute a freshness lifetime
using a heuristic. If the value is greater than 24 hours, the cache must
attach Warning 13 113 to any response whose age is more than 24 hours if
such warning has not already been added.
Also, if the response does have a Last-Modified time, the heuristic
expiration value SHOULD be no more than some fraction of the interval
since that time. A typical setting of this fraction might be 10%.
The calculation to determine if a response has expired is quite simple:
response_is_fresh = (freshness_lifetime > current_age)
Fielding, et al [Page 89]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
13.2.5 Disambiguating Expiration Values
Because expiration values are assigned optimistically, it is possible
for two caches to contain fresh values for the same resource that are
different.
If a client performing a retrieval receives a non-first-hand response
for a request that was already fresh in its own cache, and the Date
Fielding, et al [Page 79]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
header in its existing cache entry is newer than the Date on the new
response, then the client MAY ignore the response. If so, it MAY retry
the request with a "Cache-Control: max-age=0" directive (see section
14.9), to force a check with the origin server.
If a cache has two fresh responses for the same representation with
different validators, it MUST use the one with the more recent Date
header. This situation may arise because the cache is pooling responses
from other caches, or because a client has asked for a reload or a
revalidation of an apparently fresh cache entry.
13.2.6 Disambiguating Multiple Responses
Because a client may be receiving responses via multiple paths, so that
some responses flow through one set of caches and other responses flow
through a different set of caches, a client may receive responses in an
order different from that in which the origin server sent them. We would
like the client to use the most recently generated response, even if
older responses are still apparently fresh.
Neither the entity tag nor the expiration value can impose an ordering
on responses, since it is possible that a later response intentionally
carries an earlier expiration time. However, the HTTP/1.1 specification
requires the transmission of Date headers on every response, and the
Date values are ordered to a granularity of one second.
When a client tries to revalidate a cache entry, and the response it
receives contains a Date header that appears to be older than the one
for the existing entry, then the client SHOULD repeat the request
unconditionally, and include
Cache-Control: max-age=0
to force any intermediate caches to validate their copies directly with
the origin server, or
Cache-Control: no-cache
to force any intermediate caches to obtain a new copy from the origin
server.
Fielding, et al [Page 90]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
If the Date values are equal, then the client may use either response
(or may, if it is being extremely prudent, request a new response).
Servers MUST NOT depend on clients being able to choose
deterministically between responses generated during the same second, if
their expiration times overlap.
13.3 Validation Model
When a cache has a stale entry that it would like to use as a response
to a client's request, it first has to check with the origin server (or
Fielding, et al [Page 80]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
possibly an intermediate cache with a fresh response) to see if its
cached entry is still usable. We call this "validating" the cache entry.
Since we do not want to have to pay the overhead of retransmitting the
full response if the cached entry is good, and we do not want to pay the
overhead of an extra round trip if the cached entry is invalid, the
HTTP/1.1 protocol supports the use of conditional methods.
The key protocol features for supporting conditional methods are those
concerned with "cache validators." When an origin server generates a
full response, it attaches some sort of validator to it, which is kept
with the cache entry. When a client (user agent or proxy cache) makes a
conditional request for a resource for which it has a cache entry, it
includes the associated validator in the request.
The server then checks that validator against the current validator for
the entity, and, if they match, it responds with a special status code
(usually, 304 (Not Modified)) and no entity-body. Otherwise, it returns
a full response (including entity-body). Thus, we avoid transmitting the
full response if the validator matches, and we avoid an extra round trip
if it does not match.
Note: the comparison functions used to decide if validators match
are defined in section 13.3.3.
In HTTP/1.1, a conditional request looks exactly the same as a normal
request for the same resource, except that it carries a special header
(which includes the validator) that implicitly turns the method
(usually, GET) into a conditional.
The protocol includes both positive and negative senses of
cache-validating cache-
validating conditions. That is, it is possible to request either that a
method be performed if and only if a validator matches or if and only if
no validators match.
Note: a response that lacks a validator may still be cached, and
served from cache until it expires, unless this is explicitly
prohibited by a Cache-Control directive. However, a cache cannot do
a conditional
Fielding, et al [Page 91]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 retrieval if it does not have a validator for the
entity, which means it will not be refreshable after it expires.
13.3.1 Last-modified Dates
The Last-Modified entity-header field value is often used as a cache
validator. In simple terms, a cache entry is considered to be valid if
the entity has not been modified since the Last-Modified value.
13.3.2 Entity Tag Cache Validators
The ETag entity-header
Fielding, et al [Page 81]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
13.3.2 Entity Tag Cache Validators
The ETag entity-header field value, an entity tag, provides for an
"opaque" cache validator. This may allow more reliable validation in
situations where it is inconvenient to store modification dates, where
the one-second resolution of HTTP date values is not sufficient, or
where the origin server wishes to avoid certain paradoxes that may arise
from the use of modification dates.
Entity Tags are described in section 3.11. The headers used with entity
tags are described in sections 14.20, 14.25, 14.26 and 14.43.
13.3.3 Weak and Strong Validators
Since both origin servers and caches will compare two validators to
decide if they represent the same or different
entities, one entities. One normally
would expect that if the entity (the entity-body or any entity-headers)
changes in any way, then the associated validator would change as well.
If this is true, then we call this validator a "strong validator."
However, there may be cases when a server prefers to change the
validator only on semantically significant changes, and not when
insignificant aspects of the entity change. A validator that does not
always change when the resource changes is a "weak validator."
Entity tags are normally "strong validators," but the protocol provides
a mechanism to tag an entity tag as "weak." One can think of a strong
validator as one that changes whenever the bits of an entity changes,
while a weak value changes whenever the meaning of an entity changes.
Alternatively, one can think of a strong validator as part of an
identifier for a specific entity, while a weak validator is part of an
identifier for a set of semantically equivalent entities.
Fielding, et al [Page 92]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Note: One example of a strong validator is an integer that is
incremented in stable storage every time an entity is changed.
An entity's modification time, if represented with one-
second one-second
resolution, could be a weak validator, since it is possible that
the resource may be modified twice during a single second.
Support for weak validators is optional; however, optional. However, weak validators
allow for more efficient caching of equivalent objects; for
example, a hit counter on a site is probably good enough if it is
updated every few days or weeks, and any value during that period
is likely "good enough" to be equivalent.
A "use" of a validator is either when a client generates a request and
includes the validator in a validating header field, or when a server
compares two validators.
Fielding, et al [Page 82]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Strong validators are usable in any context. Weak validators are only
usable in contexts that do not depend on exact equality of an entity.
For example, either kind is usable for a conditional GET of a full
entity. However, only a strong validator is usable for a sub-range
retrieval, since otherwise the client may end up with an internally
inconsistent entity.
The only function that the HTTP/1.1 protocol defines on validators is
comparison. There are two validator comparison functions, depending on
whether the comparison context allows the use of weak validators or not:
. The strong comparison function: in order to be considered equal,
both validators must be identical in every way, and neither may be
weak.
. The weak comparison function: in order to be considered equal, both
validators must be identical in every way, but either or both of
them may be tagged as "weak" without affecting the result.
The weak comparison function MAY be used for simple (non-
subrange) (non-subrange) GET
requests. The strong comparison function MUST be used in all other
cases.
An entity tag is strong unless it is explicitly tagged as weak. Section
3.11 gives the syntax for entity tags.
A Last-Modified time, when used as a validator in a request, is
implicitly weak unless it is possible to deduce that it is strong, using
the following rules:
. The validator is being compared by an origin server to the actual
current validator for the entity and,
Fielding, et al [Page 93]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
. That origin server reliably knows that the associated entity did
not change twice during the second covered by the presented
validator.
or
. The validator is about to be used by a client in an If-
Modified-Since If-Modified-
Since or If-Unmodified-Since header, because the client has a cache
entry for the associated entity, and
. That cache entry includes a Date value, which gives the time when
the origin server sent the original response, and
. The presented Last-Modified time is at least 60 seconds before the
Date value.
or
. The validator is being compared by an intermediate cache to the
validator stored in its cache entry for the entity, and
. That cache entry includes a Date value, which gives the time when
the origin server sent the original response, and
. The presented Last-Modified time is at least 60 seconds before the
Date value.
Fielding, et al [Page 83]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
This method relies on the fact that if two different responses were sent
by the origin server during the same second, but both had the same Last-Modified Last-
Modified time, then at least one of those responses would have a Date
value equal to its Last-Modified time. The arbitrary 60-second limit
guards against the possibility that the Date and Last-
Modified Last-Modified values
are generated from different clocks, or at somewhat different times
during the preparation of the response. An implementation may use a
value larger than 60 seconds, if it is believed that 60 seconds is too
short.
If a client wishes to perform a sub-range retrieval on a value for which
it has only a Last-Modified time and no opaque validator, it may do this
only if the Last-Modified time is strong in the sense described here.
A cache or origin server receiving a cache-conditional request, other
than a full-body GET request, MUST use the strong comparison function to
evaluate the condition.
These rules allow HTTP/1.1 caches and clients to safely perform sub-range sub-
range retrievals on values that have been obtained from HTTP/1.0
servers.
Fielding, et al [Page 94]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
13.3.4 Rules for When to Use Entity Tags and Last-modified Dates
We adopt a set of rules and recommendations for origin servers, clients,
and caches regarding when various validator types should be used, and
for what purposes.
HTTP/1.1 origin servers:
. SHOULD send an entity tag validator unless it is not feasible to
generate one.
. MAY send a weak entity tag instead of a strong entity tag, if
performance considerations support the use of weak entity tags, or
if it is unfeasible to send a strong entity tag.
. SHOULD send a Last-Modified value if it is feasible to send one,
unless the risk of a breakdown in semantic transparency that could
result from using this date in an If-Modified-Since header would
lead to serious problems.
In other words, the preferred behavior for an HTTP/1.1 origin server is
to send both a strong entity tag and a Last-Modified value.
In order to be legal, a strong entity tag MUST change whenever the
associated entity value changes in any way. A weak entity tag SHOULD
change whenever the associated entity changes in a semantically
significant way.
Note: in order to provide semantically transparent caching, an
origin server must avoid reusing a specific strong entity tag value
for two different entities, or reusing a specific weak entity tag
Fielding, et al [Page 84]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
value for two semantically different entities. Cache entries may
persist for arbitrarily long periods, regardless of expiration
times, so it may be inappropriate to expect that a cache will never
again attempt to validate an entry using a validator that it
obtained at some point in the past.
HTTP/1.1 clients:
. If an entity tag has been provided by the origin server, MUST use
that entity tag in any cache-
conditional cache-conditional request (using If-Match or
If-None-Match).
. If only a Last-Modified value has been provided by the origin
server, SHOULD use that value in non-subrange cache-conditional
requests (using If-Modified-Since).
. If only a Last-Modified value has been provided by an HTTP/1.0
origin server, MAY use that value in subrange cache-conditional
requests (using If-Unmodified-
Since:). If-Unmodified-Since:). The user agent should
provide a way to disable this, in case of difficulty.
Fielding, et al [Page 95]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
. If both an entity tag and a Last-Modified value have been provided
by the origin server, SHOULD use both validators in cache-conditional cache-
conditional requests. This allows both HTTP/1.0 and HTTP/1.1 caches
to respond appropriately.
An HTTP/1.1 cache, origin server, upon receiving a request, MUST use the
most restrictive validator when deciding whether the
client's cache entry matches the cache's own conditional request that
includes both a Last-modified date (e.g., in an If-Modified-Since or If-
Unmodified-Since header field) and one or more entity tags (e.g., in an
If-Match, If-None-Match, or If-Range header field) as cache entry.
This validators,
MUST NOT return a response status of 304 (Not Modified) unless doing so
is only an issue when consistent with all of the conditional header fields in the request.
An HTTP/1.1 caching proxy, upon receiving a conditional request contains that
includes both an
entity tag and a last-modified-date validator (If-Modified-
Since Last-modified date and one or If-Unmodified-Since). more entity tags as cache
validators, MUST NOT return a locally cached response to the client
unless that cached response is consistent with all of the conditional
header fields in the request.
A note on rationale: The general principle behind these rules is
that HTTP/1.1 servers and clients should transmit as much non-redundant non-
redundant information as is available in their responses and
requests. HTTP/1.1 systems receiving this information will make the
most conservative assumptions about the validators they receive.
HTTP/1.0 clients and caches will ignore entity tags. Generally,
last-modified values received or used by these systems will support
transparent and efficient caching, and so HTTP/1.1 origin servers
should provide Last-Modified values. In those rare cases where the
use of a Last-Modified value as a validator by an HTTP/1.0 system
could result in a serious problem, then HTTP/1.1 origin servers
should not provide one.
Fielding, et al [Page 85]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
13.3.5 Non-validating Conditionals
The principle behind entity tags is that only the service author knows
the semantics of a resource well enough to select an appropriate cache
validation mechanism, and the specification of any validator comparison
function more complex than byte-equality would open up a can of worms.
Thus, comparisons of any other headers (except Last-
Modified, Last-Modified, for
compatibility with HTTP/1.0) are never used for purposes of validating a
cache entry.
13.4 Response Cachability
Unless specifically constrained by a Cache-Control (section 14.9)
directive, a caching system may always store a successful response (see
section 13.8) as a cache entry, may return it without validation if it
is fresh, and may return it after successful validation. If there is
neither a cache validator nor an explicit expiration time associated
with a response, we do not expect it to be cached, but certain caches
may violate this expectation (for example, when little or no network
connectivity is available). A client
Fielding, et al [Page 96]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 can usually detect that such a
response was taken from a cache by comparing the Date header to the
current time.
Note that some HTTP/1.0 caches are known to violate this
expectation without providing any Warning.
However, in some cases it may be inappropriate for a cache to retain an
entity, or to return it in response to a subsequent request. This may be
because absolute semantic transparency is deemed necessary by the
service author, or because of security or privacy considerations.
Certain Cache-Control directives are therefore provided so that the
server can indicate that certain resource entities, or portions thereof,
may not be cached regardless of other considerations.
Note that section 14.8 normally prevents a shared cache from saving and
returning a response to a previous request if that request included an
Authorization header.
A response received with a status code of 200, 203, 206, 300, 301 or 410
may be stored by a cache and used in reply to a subsequent request,
subject to the expiration mechanism, unless a Cache-Control directive
prohibits caching. However, a cache that does not support the Range and
Content-Range headers MUST NOT cache 206 (Partial Content) responses.
A response received with any other status code MUST NOT be returned in a
reply to a subsequent request unless there are Cache-Control directives
or another header(s) that explicitly allow it. For example, these
include the following: an Expires header (section 14.21); a "max-age",
"s-maxage" "must-revalidate", "proxy-revalidate", "public" or "private"
Cache-Control directive (section 14.9).
Fielding, et al [Page 86]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
13.5 Constructing Responses From Caches
The purpose of an HTTP cache is to store information received in
response to requests, for use in responding to future requests. In many
cases, a cache simply returns the appropriate parts of a response to the
requester. However, if the cache holds a cache entry based on a previous
response, it may have to combine parts of a new response with what is
held in the cache entry.
13.5.1 End-to-end and Hop-by-hop Headers
For the purpose of defining the behavior of caches and non-
caching non-caching
proxies, we divide HTTP headers into two categories:
Fielding, et al [Page 97]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
. End-to-end headers, which must be transmitted to the ultimate
recipient of a request or response. End-to-end headers in responses
must be stored as part of a cache entry and transmitted in any
response formed from a cache entry.
. Hop-by-hop headers, which are meaningful only for a single
transport-level connection, and are not stored by caches or
forwarded by proxies.
The following HTTP/1.1 headers are hop-by-hop headers:
. Connection
. Keep-Alive
. Public . Proxy-Authenticate
. Transfer-Encoding
. Upgrade
All other headers defined by HTTP/1.1 are end-to-end headers.
Hop-by-hop headers introduced in future versions of HTTP MUST be listed
in a Connection header, as described in section 14.10.
13.5.2 Non-modifiable Headers
Some features of the HTTP/1.1 protocol, such as Digest Authentication,
depend on the value of certain end-to-end headers. A cache or non-caching non-
caching proxy SHOULD NOT modify an end-to-end header unless the
definition of that header requires or specifically allows that.
A cache or non-caching proxy MUST NOT modify any of the following fields
in a request or response, nor may it add any of these fields if not
already present:
. Content-Location
. Content-MD5
. ETag
. Last-Modified
Fielding, et al [Page 87]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
A cache or non-caching proxy MUST NOT modify any of the following fields
in a response:
. Expires
. Content-Length
but it may add any of these fields if not already present. If an Expires
header is added, it MUST be given a field-
value field-value identical to that of the
Date header in that response. If a Content-Length header is added, it
MUST correctly reflect the length of the entity-body.
Fielding, et al [Page 98]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Note: a typical reason for adding the Content-Length header is that
the origin server sent the content chunked encoded.
A cache or non-caching proxy MUST NOT modify or add any of the following
fields in a response that contains the no-
transform no-transform Cache-Control
directive, or in any request:
. Content-Encoding
. Content-Length
. Content-Range
. Content-Type
A cache or non-caching proxy MAY modify or add these fields in a
response that does not include no-transform, but if it does so, it MUST
add a Warning 14 114 (Transformation applied) if one does not already
appear in the response.
Warning: unnecessary modification of end-to-end headers may cause
authentication failures if stronger authentication mechanisms are
introduced in later versions of HTTP. Such authentication
mechanisms may rely on the values of header fields not listed here.
13.5.3 Combining Headers
When a cache makes a validating request to a server, and the server
provides a 304 (Not Modified) response or a 206 (Partial Content)
response, the cache must construct a response to send to the requesting
client.
In the status code is 304 (Not Modified), the cache uses the entity-body
stored in the cache entry as the entity-body of this outgoing response.
If the status code is 206 (Partial Content) and the ETag or Last-Modified Last-
Modified headers match exactly, see 13.5.4, the cache may combine the
contents stored in the cache entry with the new contents received in the
response and use the result as the entity-body of this outgoing
response, see 13.5.4.
The end-to-end headers stored in the cache entry are used for the
constructed response, except that
Fielding, et al [Page 88]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
. any stored Warning headers with warn-code 1XX (see section 14.45)
are deleted from the cache entry and the forwarded response.
. any stored Warning headers with warn-code 2XX are retained in the
cache entry and the forwarded response.
. any end-to-end headers provided in the 304 or 206 response MUST
replace the corresponding headers from the cache entry.
Fielding, et al [Page 99]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Unless the cache decides to remove the cache entry, it MUST also replace
the end-to-end headers stored with the cache entry with corresponding
headers received in the incoming response.
In other words, the set of end-to-end headers received in the incoming
response overrides all corresponding end-to-end headers stored with the
cache entry (except for stored Warning headers with warn-code 1XX, which
are deleted even if not overridden).
If a header field-name in the incoming response matches more than one
header in the cache entry, all such old headers are replaced.
Note: this rule allows an origin server to use a 304 (Not Modified)
or a 206 (Partial Content) response to update any header associated
with a previous response for the same entity or sub-ranges thereof,
although it might not always be meaningful or correct to do so.
This rule does not allow an origin server to use a 304 (Not
Modified) or a 206 (Partial Content) response to entirely delete a
header that it had provided with a previous response.
13.5.4 Combining Byte Ranges
A response may transfer only a subrange of the bytes of an entity-body,
either because the request included one or more Range specifications, or
because a connection was broken prematurely. After several such
transfers, a cache may have received several ranges of the same entity-body. entity-
body.
If a cache has a stored non-empty set of subranges for an entity, and an
incoming response transfers another subrange, the cache MAY combine the
new subrange with the existing set if both the following conditions are
met:
. Both the incoming response and the cache entry must have a cache
validator.
. The two cache validators must match using the strong comparison
function (see section 13.3.3).
If either requirement is not meant, the cache must use only the most
recent partial response (based on the Date values transmitted with every
response, and using the incoming response if these values are equal or
missing), and must discard the other partial information.
Fielding, et al [Page 100] 89]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
13.6 Caching Negotiated Responses
Use of server-driven content negotiation (section 12), as indicated by
the presence of a Vary header field in a response, alters the conditions
and procedure by which a cache can use the response for subsequent
requests. See section 14.43 for use of the Vary header field by servers.
A server MUST SHOULD use the Vary header field (section 14.43) to inform a cache of what header field dimensions are
request-header fields were used to select among multiple representations
of a cachable
response. A cache may use the selected representation (the
entity included with that particular response) for replying response subject to subsequent requests on that resource only when the
subsequent requests have the same or equivalent values for
all server-driven negotiation. The set of
header fields specified in named by the Vary response-header.
Requests with a different field value for is known as the "selecting"
request-headers.
When the cache receives a subsequent request whose Request-URI specifies
one or more of those cache entries including a Vary header fields would be forwarded toward field, the origin server.
If an entity tag was assigned cache MUST
NOT use such a cache entry to construct a response to the representation, the
forwarded new request SHOULD be conditional and include
unless all of the
entity tags selecting request-headers present in an If-None-Match header field from all its
cache entries for the Request-URI. This conveys to new request
match the
server corresponding stored request-headers in the set of entities currently held by original request.
The selecting request-headers from two requests are defined to match if
and only if the selecting request-headers in the first request can be
transformed to the selecting request-headers in the second request by
adding or removing linear whitespace (LWS) at places where this is
allowed by the corresponding BNF, and/or combining multiple message-
header fields with the same field name following the rules about message
headers in section 4.2.
A Vary header field-value of "*" always fail to match and subsequent
requests on that resource can only be properly interpreted by the origin
server.
If the selecting request header fields for the cached entry do not match
the selecting request header fields of the new request, then the cache
MUST NOT use a cached entry to satisfy the request unless it first
relays the new request to the origin server in a conditional request and
the server responds with 304 (Not Modified), including an entity tag or
Content-Location that indicates which entity should be used.
If an entity tag was assigned to a cached representation, the forwarded
request SHOULD be conditional and include the entity tags in an If-None-
Match header field from all its cache entries for the resource. This
conveys to the server the set of entities currently held by the cache,
so that if any one of these entities matches the requested entity, the
server can use the ETag header field in its 304 (Not Modified) response
to tell the cache which entry is appropriate. If the entity-tag of the
new response matches that of an existing entry, the new response SHOULD
be used to update the header fields of the existing entry, and the
result MUST be returned to the client.
The Vary header field may also inform the cache that the
representation was selected using criteria not limited to
the request-headers; in this case, a cache MUST NOT use the
response in a reply to a subsequent request unless the cache
relays the new request to the origin server in a conditional
request and the server responds with 304 (Not Modified),
including an entity tag or Content-Location that indicates
which entity should be used.
If any of the existing cache entries contains only partial content for
the associated entity, its entity-tag SHOULD NOT be included in the If-None-Match If-
Fielding, et al [Page 90]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
None-Match header field unless the request is for a range that would be
fully satisfied by that entry.
If a cache receives a successful response whose Content-
Location Content-Location field
matches that of an existing cache entry for the same Request-URI, whose
entity-tag differs from that of the existing entry, and whose Date is
more recent than that of the existing entry, the existing entry SHOULD
NOT be returned in response to future requests, requests and should be deleted
from the cache.
Fielding, et al [Page 101]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
13.7 Shared and Non-Shared Caches
For reasons of security and privacy, it is necessary to make a
distinction between "shared" and "non-shared" caches. A non-shared cache
is one that is accessible only to a single user. Accessibility in this
case SHOULD be enforced by appropriate security mechanisms. All other
caches are considered to be "shared." Other sections of this
specification place certain constraints on the operation of shared
caches in order to prevent loss of privacy or failure of access
controls.
13.8 Errors or Incomplete Response Cache Behavior
A cache that receives an incomplete response (for example, with fewer
bytes of data than specified in a Content-Length header) may store the
response. However, the cache MUST treat this as a partial response.
Partial responses may be combined as described in section 13.5.4; the
result might be a full response or might still be partial. A cache MUST
NOT return a partial response to a client without explicitly marking it
as such, using the 206 (Partial Content) status code. A cache MUST NOT
return a partial response using a status code of 200 (OK).
If a cache receives a 5xx response while attempting to revalidate an
entry, it may either forward this response to the requesting client, or
act as if the server failed to respond. In the latter case, it MAY
return a previously received response unless the cached entry includes
the "must-revalidate" Cache-Control directive (see section 14.9).
13.9 Side Effects of GET and HEAD
Unless the origin server explicitly prohibits the caching of their
responses, the application of GET and HEAD methods to any resources
SHOULD NOT have side effects that would lead to erroneous behavior if
these responses are taken from a cache. They may still have side
effects, but a cache is not required to consider such side effects in
Fielding, et al [Page 91]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
its caching decisions. Caches are always expected to observe an origin
server's explicit restrictions on caching.
EDITOR's Note: Roy Fielding is opposed to the change
represented by the following two paragraphs:
Some HTTP/1.0 cache operators have found that it is
dangerous to cache and reuse without revalidation responses
We note one exception to requests for URLs that include any of the strings "cgi-
bin", "htbin", or "?". Applications this rule: since some applications have
traditionally used
these GETs and HEADs with query URLs (those containing a
"?" in conjunction with the rel_path part) to perform operations with significant
Fielding, et al [Page 102]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 side effects for GET or HEAD methods. However, if
effects, caches MUST NOT treat responses to such a
response includes URLs as fresh unless
the server provides an explicit, future, explicit expiration time, then
this implies time. This specifically means
that the response may be cached and reused
without revalidation until it expires. If responses from HTTP/1.0 servers for such a response
includes a Last-Modified or Etag header, this implies that
the response may URIs should not be reused after revalidation (or without
revalidation if explicitly fresh).
A cache MUST NOT assign a heuristic expiration time to taken
from a
response cache. See section 9.1.1 for related information.
13.10 Invalidation After Updates or Deletions
The effect of certain methods performed on a URL that includes resource at the strings "htbin", "cgi-
bin", or "?" in its rel_path part. If such a response does
not carry an explicit expiration time, it must be treated
as if it expires immediately.
13.10 Invalidation After Updates or Deletions
The effect of certain methods at the origin server may cause
one origin
server may cause one or more existing cache entries to become non-
transparently invalid. That is, although they may continue to be
"fresh," they do not accurately reflect what the origin server would
return for a new request. request on that resource.
There is no way for the HTTP protocol to guarantee that all such cache
entries are marked invalid. For example, the request that caused the
change at the origin server may not have gone through the proxy where a
cache entry is stored. However, several rules help reduce the likelihood
of erroneous behavior.
In this section, the phrase "invalidate an entity" means that the cache
should either remove all instances of that entity from its storage, or
should mark these as "invalid" and in need of a mandatory revalidation
before they can be returned in response to a subsequent request.
Some HTTP methods may MUST cause a cache to invalidate an entity. This is
either the entity referred to by the Request-URI, or by the Location or
Content-Location headers (if present). These methods are:
. PUT
. DELETE
. POST
In order to prevent denial of service attacks, an invalidation based on
the URI in a Location or Content-
Location Content-Location header MUST only be performed
if the host part is the same as in the Request-URI.
13.11 Write-Through Mandatory
All methods that may be expected to cause modifications to the origin
server's resources MUST be written through to the
Fielding, et al [Page 103]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 origin server. This
currently includes all methods except for GET and HEAD. A cache MUST NOT
reply to such a request from a client before having transmitted the
request to the inbound server, and having received a corresponding
response from the inbound server. This does not prevent a proxy cache
Fielding, et al [Page 92]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
from sending a 100 (Continue) response before the inbound server has
sent its final reply.
The alternative (known as "write-back" or "copy-back" caching) is not
allowed in HTTP/1.1, due to the difficulty of providing consistent
updates and the problems arising from server, cache, or network failure
prior to write-back.
13.12 Cache Replacement
If a new cachable (see sections 14.9.2, 13.2.5, 13.2.6 and 13.8)
response is received from a resource while any existing responses for
the same resource are cached, the cache SHOULD use the new response to
reply to the current request. It may insert it into cache storage and
may, if it meets all other requirements, use it to respond to any future
requests that would previously have caused the old response to be
returned. If it inserts the new response into cache storage it should
follow the rules in section 13.5.3.
Note: a new response that has an older Date header value than
existing cached responses is not cachable.
13.13 History Lists
User agents often have history mechanisms, such as "Back" buttons and
history lists, which can be used to redisplay an entity retrieved
earlier in a session.
History mechanisms and caches are different. In particular history
mechanisms SHOULD NOT try to show a semantically transparent view of the
current state of a resource. Rather, a history mechanism is meant to
show exactly what the user saw at the time when the resource was
retrieved.
By default, an expiration time does not apply to history mechanisms. If
the entity is still in storage, a history mechanism should display it
even if the entity has expired, unless the user has specifically
configured the agent to refresh expired history documents.
This should not be construed to prohibit the history mechanism from
telling the user that a view may be stale.
Note: if history list mechanisms unnecessarily prevent users from
viewing stale resources, this will tend to force service authors to
avoid using HTTP expiration
Fielding, et al [Page 104]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 controls and cache controls when they
would otherwise like to. Service authors may consider it important
that users not be presented with error messages or warning messages
when they use navigation controls (such as BACK) to view previously
fetched resources. Even though sometimes such resources ought not
Fielding, et al [Page 93]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
to cached, or ought to expire quickly, user interface
considerations may force service authors to resort to other means
of preventing caching (e.g. "once-only" URLs) in order not to
suffer the effects of improperly functioning history mechanisms.
14 Header Field Definitions
This section defines the syntax and semantics of all standard HTTP/1.1
header fields. For entity-header fields, both sender and recipient refer
to either the client or the server, depending on who sends and who
receives the entity.
14.1 Accept
The Accept request-header field can be used to specify certain media
types which are acceptable for the response. Accept headers can be used
to indicate that the request is specifically limited to a small set of
desired types, as in the case of a request for an in-line image.
Accept = "Accept" ":"
#( media-range [ accept-params ] )
media-range = ( "*/*"
| ( type "/" "*" )
| ( type "/" subtype )
) *( ";" parameter )
accept-params = ";" "q" "=" qvalue *( accept-extension )
accept-extension = ";" token [ "=" ( token | quoted-string ) ]
The asterisk "*" character is used to group media types into ranges,
with "*/*" indicating all media types and "type/*" indicating all
subtypes of that type. The media-range MAY include media type parameters
that are applicable to that range.
Each media-range MAY be followed by one or more accept-
params, accept-params, beginning
with the "q" parameter for indicating a relative quality factor. The
first "q" parameter (if any) separates the media-range parameter(s) from
the accept-
Fielding, et al [Page 105]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
params. accept-params. Quality factors allow the user or user agent to
indicate the relative degree of preference for that media-
range, media-range, using
the qvalue scale from 0 to 1 (section 3.9). The default value is q=1.
Note: Use of the "q" parameter name to separate media type
parameters from Accept extension parameters is due to historical
practice. Although this prevents any media type parameter named
"q" from being used with a media range, such an event is believed
to be unlikely given the lack of any "q" parameters in the IANA
media type registry and the rare usage of any media type parameters
in Accept. Future media types should be discouraged from
registering any parameter named "q".
Fielding, et al [Page 94]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
The example
Accept: audio/*; q=0.2, audio/basic
SHOULD be interpreted as "I prefer audio/basic, but send me any audio
type if it is the best available after an 80% mark-down in quality."
If no Accept header field is present, then it is assumed that the client
accepts all media types. If an Accept header field is present, and if
the server cannot send a response which is acceptable according to the
combined Accept field value, then the server SHOULD send a 406 (not
acceptable) response.
A more elaborate example is
Accept: text/plain; q=0.5, text/html,
text/x-dvi; q=0.8, text/x-c
Verbally, this would be interpreted as "text/html and text/x-c are the
preferred media types, but if they do not exist, then send the text/x-dvi text/x-
dvi entity, and if that does not exist, send the text/plain entity."
Media ranges can be overridden by more specific media ranges or specific
media types. If more than one media range applies to a given type, the
most specific reference has precedence. For example,
Accept: text/*, text/html, text/html;level=1, */*
have the following precedence:
1) text/html;level=1
2) text/html
3) text/*
4) */*
Fielding, et al [Page 106]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The media type quality factor associated with a given type is determined
by finding the media range with the highest precedence which matches
that type. For example,
Accept: text/*;q=0.3, text/html;q=0.7, text/html;level=1,
text/html;level=2;q=0.4, */*;q=0.5
would cause the following values to be associated:
text/html;level=1 = 1
text/html = 0.7
text/plain = 0.3
image/jpeg = 0.5
text/html;level=2 = 0.4
text/html;level=3 = 0.7
Note: A user agent may be provided with a default set of quality
values for certain media ranges. However, unless the user agent is
a closed system which cannot interact with other rendering agents,
this default set should be configurable by the user.
Fielding, et al [Page 95]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.2 Accept-Charset
The Accept-Charset request-header field can be used to indicate what
character sets are acceptable for the response. This field allows
clients capable of understanding more comprehensive or special-purpose
character sets to signal that capability to a server which is capable of
representing documents in those character sets. The ISO-
8859-1 ISO-8859-1 character
set can be assumed to be acceptable to all user agents.
Accept-Charset = "Accept-Charset" ":"
1#( ( charset | "*" [ )[ ";" "q" "=" qvalue ] )
Character set values are described in section 3.4. Each charset may be
given an associated quality value which represents the user's preference
for that charset. The default value is q=1. An example is
Accept-Charset: iso-8859-5, unicode-1-1;q=0.8
The special value "*", if present in the Accept-Charset field, matches
every character set (including ISO-8859-1) which is not mentioned
elsewhere in the Accept-Charset field. If no "*" is present in an
Accept-Charset field, then all character sets not explicitly mentioned
get a quality value of 0, except for ISO-8859-1, which gets a quality
value of 1 if not explicitly mentioned.
Fielding, et al [Page 107]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
If no Accept-Charset header is present, the default is that any
character set is acceptable. If an Accept-Charset header is present, and
if the server cannot send a response which is acceptable according to
the Accept-Charset header, then the server SHOULD send an error response
with the 406 (not acceptable) status code, though the sending of an
unacceptable response is also allowed.
14.3 Accept-Encoding
Editor's note: there is still some nervousness about
introducing q values into accept encoding; concrete examples
of implementations which will break are needed to make the
case against them, as q values are common across other
Accept-* headers. This does seem the cleanest solution to
the problem right now.
The Accept-Encoding request-header field is similar to Accept, but
restricts the content-coding (section 3.5) that are acceptable in the
response.
Accept-Encoding = "Accept-Encoding" ":"
1#( codings [ ";" "q" "=" qvalue ] )
codings = ( content-codings content-coding | "*" )
Examples of its use are:
Accept-Encoding: compress, gzip
Accept-Encoding:
Accept-Encoding: *
Accept-Encoding: compress;q=0.5, gzip;q=1.0
Accept-Encoding: gzip=1.0; gzip;q=1.0; identity=0.5; *;q=0
A server tests whether a content-coding is acceptable, according to an
Accept-Encoding field, using these rules:
Fielding, et al [Page 96]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
1. If the content-coding is one of the content-codings listed in
the Accept-Encoding field, then it is acceptable, unless it is
accompanied by a qvalue of 0. (As defined in section 3.9, a qvalue
of 0 means "not acceptable.")
2. The special "*" symbol in an Accept-Encoding field matches any
available content-coding not explicitly listed in the header field.
3. If multiple content-codings are acceptable, then the acceptable
content-coding with the highest non-zero qvalue is preferred.
4. The "identity" content-coding is always acceptable, unless
specifically refused because the Accept-Encoding field includes
"identity;q=0", or because the field includes
Fielding, et al [Page 108]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 "*;q=0" and does not
explictly include the "identity" content-coding. If the Accept-Encoding Accept-
Encoding field-value is empty, then only the "identity" encoding is
acceptable.
If an Accept-Encoding field is present in a request, and if the server
cannot send a response which is acceptable according to the Accept-Encoding Accept-
Encoding header, then the server SHOULD send an error response with the
406 (Not Acceptable) status code.
If no Accept-Encoding field is present in a request, the server MAY
assume that the client will accept any content coding. In this case, if
"identity" is one of the available content-codings, then the server
SHOULD use the "identity" content-coding, unless it has additional
information that a different content-coding is meaningful to the client.
Note: If the request does not include an Accept-Encoding field, and
if the "identity" content-coding is unavailable, then preference
should be given to content-codings commonly understood by HTTP/1.0
clients (i.e., "gzip" and "compress"); some older clients
improperly display messages sent with other content-encodings. The
server may also make this decision based on information about the
particular user-agent or client.
Note: Most HTTP/1.0 applications do not recognize or obey qvalues
associated with content-codings.
14.4 Accept-Language
The Accept-Language request-header field is similar to Accept, but
restricts the set of natural languages that are preferred as a response
to the request.
Accept-Language = "Accept-Language" ":"
1#( language-range [ ";" "q" "=" qvalue ] )
Fielding, et al [Page 97]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
language-range = ( ( 1*8ALPHA *( "-" 1*8ALPHA ) ) | "*" )
Each language-range MAY be given an associated quality value which
represents an estimate of the user's preference for the languages
specified by that range. The quality value defaults to "q=1". For
example,
Accept-Language: da, en-gb;q=0.8, en;q=0.7
would mean: "I prefer Danish, but will accept British English and other
types of English." A language-range matches a language-tag if it exactly
equals the tag, or if it exactly equals a prefix of the tag such that
the first tag character following the prefix is "-". The special range
Fielding, et al [Page 109]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
"*", if present in the Accept-Language field, matches every tag not
matched by any other range present in the Accept-
Language Accept-Language field.
Note: This use of a prefix matching rule does not imply that
language tags are assigned to languages in such a way that it is
always true that if a user understands a language with a certain
tag, then this user will also understand all languages with tags
for which this tag is a prefix. The prefix rule simply allows the
use of prefix tags if this is the case.
The language quality factor assigned to a language-tag by the Accept-Language Accept-
Language field is the quality value of the longest language-range in the
field that matches the language-tag. If no language-range in the field
matches the tag, the language quality factor assigned is 0. If no
Accept-Language header is present in the request, the server SHOULD
assume that all languages are equally acceptable. If an Accept-Language
header is present, then all languages which are assigned a quality
factor greater than 0 are acceptable.
It may be contrary to the privacy expectations of the user to send an
Accept-Language header with the complete linguistic preferences of the
user in every request. For a discussion of this issue, see section 15.7. 15.6.
Note: As intelligibility is highly dependent on the individual
user, it is recommended that client applications make the choice of
linguistic preference available to the user. If the choice is not
made available, then the Accept-Language header field must not be
given in the request.
Note: When making the choice of linguistic preference available to
the user, implementors should take into account the fact that users
are not familiar with the details of language matching as described
above, and should provide appropriate guidance. As an example,
users may assume that on selecting "en-gb", they will be served any
kind of English document if British English is not available. A
user agent may suggest in such a case to add "en" to get the best
matching behaviour.
Fielding, et al [Page 98]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.5 Accept-Ranges
The Accept-Ranges response-header field allows the server to indicate
its acceptance of range requests for a resource:
Accept-Ranges = "Accept-Ranges" ":" acceptable-ranges
Fielding, et al [Page 110]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
acceptable-ranges = 1#range-unit | "none"
Origin servers that accept byte-range requests MAY send
Accept-Ranges: bytes
but are not required to do so. Clients MAY generate byte-
range byte-range requests
without having received this header for the resource involved.
Servers that do not accept any kind of range request for a resource MAY
send
Accept-Ranges: none
to advise the client not to attempt a range request.
14.6 Age
The Age response-header field conveys the sender's estimate of the
amount of time since the response (or its revalidation) was generated at
the origin server. A cached response is "fresh" if its age does not
exceed its freshness lifetime. Age values are calculated as specified in
section 13.2.3.
Age = "Age" ":" age-value
age-value = delta-seconds
Age values are non-negative decimal integers, representing time in
seconds.
If a cache receives a value larger than the largest positive integer it
can represent, or if any of its age calculations overflows, it MUST
transmit an Age header with a value of 2147483648 (2^31). An HTTP/1.1 caches
server that includes a cache MUST send include an Age header field in every response.
response generated from its own cache. Caches SHOULD use an arithmetic
type of at least 31 bits of range.
14.7 Allow
Editors Note: The OPTIONS changes would cause possible
changes to Allow and/or Public for consistency with each
other and with section 9.2 (OPTIONS).
The Allow entity-header field lists the set of methods supported by the
resource identified by the Request-URI. The purpose of this field is
strictly to inform the recipient of valid methods associated with the
resource. An Allow header field MUST be present in a 405 (Method Not
Allowed) response.
Fielding, et al [Page 111]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Allow = "Allow" ":" 1#method #Method
Example of use:
Fielding, et al [Page 99]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Allow: GET, HEAD, PUT
This field cannot prevent a client from trying other methods. However,
the indications given by the Allow header field value SHOULD be
followed. The actual set of allowed methods is defined by the origin
server at the time of each request.
The Allow header field MAY be provided with a PUT request to recommend
the methods to be supported by the new or modified resource. The server
is not required to support these methods and SHOULD include an Allow
header in the response giving the actual supported methods.
A proxy MUST NOT modify the Allow header field even if it does not
understand all the methods specified, since the user agent MAY have
other means of communicating with the origin server.
The Allow header field does not indicate what methods are
implemented at the server level. Servers MAY use the Public
response-header field (section 14.35) to describe what
methods are implemented on the server as a whole.
14.8 Authorization
A user agent that wishes to authenticate itself with a server--usually,
but not necessarily, after receiving a 401 response--MAY do so by
including an Authorization request-
header request-header field with the request. The
Authorization field value consists of credentials containing the
authentication information of the user agent for the realm of the
resource being requested.
Authorization = "Authorization" ":" credentials
HTTP access authentication is described in section 11. If a request is
authenticated and a realm specified, the same credentials SHOULD be
valid for all other requests within this realm.
When a shared cache (see section 13.7) receives a request containing an
Authorization field, it MUST NOT return the corresponding response as a
reply to any other request, unless one of the following specific
exceptions holds:
1.If
1. If the response includes the "s-maxage" Cache-Control directive,
the cache MAY use that response in replying to a subsequent
request. But (if the specified maximum
Fielding, et al [Page 112]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 age has passed) a proxy
cache MUST first revalidate it with the origin server, using the
request-headers from the new request to allow the origin server to
authenticate the new request. (This is the defined behavior for
proxy-maxage.) If the response includes "proxy-maxage=0", the proxy
MUST always revalidate it before re-using it.
2.If
2. If the response includes the "must-revalidate" Cache-
Control Cache-Control
directive, the cache MAY use that response in replying to a
subsequent request. But if the response is stale, all caches MUST
first revalidate it with the origin server, using the request-headers request-
headers from the new request to allow the origin server to
authenticate the new request.
3.If
Fielding, et al [Page 100]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
3. If the response includes the "public" Cache-Control directive, it
may be returned in reply to any subsequent request.
14.9 Cache-Control
The Cache-Control general-header field is used to specify directives
that MUST be obeyed by all caching mechanisms along the request/response
chain. The directives specify behavior intended to prevent caches from
adversely interfering with the request or response. These directives
typically override the default caching algorithms. Cache directives are
unidirectional in that the presence of a directive in a request does not
imply that the same directive should be given in the response.
Note that HTTP/1.0 caches may not implement Cache-
Control Cache-Control and may
only implement Pragma: no-cache (see section 14.32).
Cache directives must be passed through by a proxy or gateway
application, regardless of their significance to that application, since
the directives may be applicable to all recipients along the
request/response chain. It is not possible to specify a cache-directive
for a specific cache.
Cache-Control = "Cache-Control" ":" 1#cache-
directive 1#cache-directive
cache-directive = cache-request-directive
| cache-response-directive
cache-request-directive =
"no-cache"
| "no-store"
| "max-age" "=" delta-seconds
| "max-stale" [ "=" delta-seconds ]
Fielding, et al [Page 113]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
| "min-fresh" "=" delta-seconds
| "no-transform"
| "only-if-cached"
| cache-extension
cache-response-directive =
"public"
| "private" [ "=" <"> 1#field-name <"> ]
| "no-cache" [ "=" <"> 1#field-name <"> ]
| "no-store"
| "no-transform"
| "must-revalidate"
| "proxy-revalidate"
| "max-age" "=" delta-seconds
| "s-maxage" "=" delta-seconds
| cache-extension
cache-extension = token [ "=" ( token | quoted-string ) ]
When a directive appears without any 1#field-name parameter, the
directive applies to the entire request or response. When such a
directive appears with a 1#field-name parameter, it applies only to the
Fielding, et al [Page 101]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
named field or fields, and not to the rest of the request or response.
This mechanism supports extensibility; implementations of future
versions of the HTTP protocol may apply these directives to header
fields not defined in HTTP/1.1.
The cache-control directives can be broken down into these general
categories:
. Restrictions on what is cachable; these may only be imposed by the
origin server.
. Restrictions on what may be stored by a cache; these may be imposed
by either the origin server or the user agent.
. Modifications of the basic expiration mechanism; these may be
imposed by either the origin server or the user agent.
. Controls over cache revalidation and reload; these may only be
imposed by a user agent.
. Control over transformation of entities.
. Extensions to the caching system.
14.9.1 What is Cachable
By default, a response is cachable if the requirements of the request
method, request header fields, and the response status indicate that it
is cachable. Section 13.4 summarizes these defaults for cachability. The
following Cache-Control
Fielding, et al [Page 114]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 response directives allow an origin server to
override the default cachability of a response:
public
Indicates that the response is cachable by any cache, even if it
would normally be non-cachable or cachable only within a non-shared
cache. (See also Authorization, section 14.8, for additional
details.)
private
Indicates that all or part of the response message is intended for a
single user and MUST NOT be cached by a shared cache. This allows an
origin server to state that the specified parts of the response are
intended for only one user and are not a valid response for requests
by other users. A private (non-shared) cache may cache the response.
Note: This usage of the word private only controls where the
response may be cached, and cannot ensure the privacy of the
message content.
no-cache
If the no-cache directive does not specify a field-name, then a
cache MUST NOT use the response to satisfy a subsequent request
without successful revalidation with the origin server. This allows
an origin server to prevent caching even by caches that have been
configured to return stale responses to client requests.
Fielding, et al [Page 102]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
If the no-cache directive does specify one or more field-
names, field-names, then
a cache MAY use the response to satisfy a subsequent request, subject
to any other restrictions on caching. However, the specified field-name(s) field-
name(s) MUST NOT be sent in the response to a subsequent request
without successful revalidation with the origin server. This allows
an origin server to prevent the re-use of certain header fields in a
response, while still allowing caching of the rest of the response.
Note: Most HTTP/1.0 caches will not recognize or obey this
directive.
14.9.2 What May be Stored by Caches
The purpose of the no-store directive is to prevent the inadvertent
release or retention of sensitive information (for example, on backup
tapes). The no-store directive applies to the entire message, and may be
sent either in a response or in a request. If sent in a request, a cache
MUST NOT store any part of either this request or any response to it. If
sent in a response, a cache MUST NOT store any part of either this
response or the request that elicited it.
Fielding, et al [Page 115]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 This directive applies to both
non-shared and shared caches. "MUST NOT store" in this context means
that the cache MUST NOT intentionally store the information in non-volatile non-
volatile storage, and MUST make a best-effort attempt to remove the
information from volatile storage as promptly as possible after
forwarding it.
Even when this directive is associated with a response, users may
explicitly store such a response outside of the caching system (e.g.,
with a "Save As" dialog). History buffers may store such responses as
part of their normal operation.
The purpose of this directive is to meet the stated requirements of
certain users and service authors who are concerned about accidental
releases of information via unanticipated accesses to cache data
structures. While the use of this directive may improve privacy in some
cases, we caution that it is NOT in any way a reliable or sufficient
mechanism for ensuring privacy. In particular, malicious or compromised
caches may not recognize or obey this directive; and communications
networks may be vulnerable to eavesdropping.
14.9.3 Modifications of the Basic Expiration Mechanism
The expiration time of an entity may be specified by the origin server
using the Expires header (see section 14.21). Alternatively, it may be
specified using the max-age directive in a response. When the "max-age"
directive is present in a cached response, the response is stale if its
current age is greater than the age value given (in seconds) at the time
of a new request for that resource. The "max-
age" "max-age" directive on a
Fielding, et al [Page 103]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
response implies that the response is cachable (i.e., "public") unless
some other, more restrictive cache directive is also present.
If a response includes both an Expires header and a max-age directive,
the max-age directive overrides the Expires header, even if the Expires
header is more restrictive. This rule allows an origin server to
provide, for a given response, a longer expiration time to an HTTP/1.1
(or later) cache than to an HTTP/1.0 cache. This may be useful if
certain HTTP/1.0 caches improperly calculate ages or expiration times,
perhaps due to desynchronized clocks.
Many HTTP/1.0 cache implementations will treat an Expires value that is
less than or equal to the response Date value as being equivalent to the
Cache-Control response directive "no-cache". If an HTTP/1.1 cache
receives such a response, and the response does not include a Cache-Control Cache-
Control header field, it SHOULD consider the response to be non-cachable
in order to retain compatibility with HTTP/1.0 servers.
Fielding, et al [Page 116]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Note: An origin server might wish to use a relatively new HTTP
cache control feature, such as the "private" directive, on a
network including older caches that do not understand that feature.
The origin server will need to combine the new feature with an
Expires field whose value is less than or equal to the Date value.
This will prevent older caches from improperly caching the
response.
If a response includes a s-maxage directive, then for a shared cache
(but not for a private cache), the maximum age specified by this
directive overrides the maximum age specified by either the max-age
directive or the Expires header. The s-maxage directive also implies
the semantics of the proxy-revalidate directive (see section 14.9.4),
i.e., that the shared cache MUST NOT use the entry after it becomes
stale to respond to a subsequent request without first revalidating it
with the origin server. The s-maxage directive is always ignored by a
private cache.
Note: most older caches, not compliant with this specification, do
not implement any Cache-Control directives. An origin server
wishing to use a Cache-
Control Cache-Control directive that restricts, but does
not prevent, caching by an HTTP/1.1-compliant cache may exploit the
requirement that the max-age directive overrides the Expires
header, and the fact that non-HTTP/1.1-
compliant non-HTTP/1.1-compliant caches do not
observe the max-age directive.
Other directives allow an user agent to modify the basic expiration
mechanism. These directives may be specified on a request:
max-age
Indicates that the client is willing to accept a response whose age
Fielding, et al [Page 104]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
is no greater than the specified time in seconds. Unless max-stale
directive is also included, the client is not willing to accept a
stale response.
min-fresh
Indicates that the client is willing to accept a response whose
freshness lifetime is no less than its current age plus the specified
time in seconds. That is, the client wants a response that will still
be fresh for at least the specified number of seconds.
max-stale
Indicates that the client is willing to accept a response that has
exceeded its expiration time. If max-stale is assigned a value, then
the client is willing to accept a response that has exceeded its
expiration time by no more than the specified number of seconds. If
no value is
Fielding, et al [Page 117]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 assigned to max-stale, then the client is willing to
accept a stale response of any age.
If a cache returns a stale response, either because of a max-stale
directive on a request, or because the cache is configured to override
the expiration time of a response, the cache MUST attach a Warning
header to the stale response, using Warning 10 110 (Response is stale).
Note: A cache may be configured to return stale responses without
validation, but only if this does not conflict with any MUST-level
requirements concerning cache validation (e.g., a "must-revalidate" Cache-
Control
Cache-Control directive).
If both the new request and the cached entry include "max-
age" "max-age"
directives, then the lesser of the two values is used for determining
the freshness of the cached entry for that request.
14.9.4 Cache Revalidation and Reload Controls
Sometimes an user agent may want or need to insist that a cache
revalidate its cache entry with the origin server (and not just with the
next cache along the path to the origin server), or to reload its cache
entry from the origin server. End-to-end revalidation may be necessary
if either the cache or the origin server has overestimated the
expiration time of the cached response. End-to-end reload may be
necessary if the cache entry has become corrupted for some reason.
End-to-end revalidation may be requested either when the client does not
have its own local cached copy, in which case we call it "unspecified
end-to-end revalidation", or when the client does have a local cached
copy, in which case we call it "specific end-to-end revalidation."
The client can specify these three kinds of action using Cache-Control
request directives:
Fielding, et al [Page 105]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
End-to-end reload
The request includes a "no-cache" Cache-Control directive or, for
compatibility with HTTP/1.0 clients, "Pragma: no-
cache". no-cache".
No field names may be included with the no-cache directive in a
request. The server MUST NOT use a cached copy when responding to
such a request. request.[jg127]
Specific end-to-end revalidation
The request includes a "max-age=0" Cache-Control directive, which
forces each cache along the path to the origin server to revalidate
its own entry, if any, with
Fielding, et al [Page 118]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 the next cache or server. The initial
request includes a cache-validating conditional with the client's
current validator.
Unspecified end-to-end revalidation
The request includes "max-age=0" Cache-Control directive, which
forces each cache along the path to the origin server to revalidate
its own entry, if any, with the next cache or server. The initial
request does not include a cache-validating conditional; the first
cache along the path (if any) that holds a cache entry for this
resource includes a cache-validating conditional with its current
validator.
When an intermediate cache is forced, by means of a max-
age=0 max-age=0 directive,
to revalidate its own cache entry, and the client has supplied its own
validator in the request, the supplied validator may differ from the
validator currently stored with the cache entry. In this case, the cache
may use either validator in making its own request without affecting
semantic transparency.
However, the choice of validator may affect performance. The best
approach is for the intermediate cache to use its own validator when
making its request. If the server replies with 304 (Not Modified), then
the cache should return its now validated copy to the client with a 200
(OK) response. If the server replies with a new entity and cache
validator, however, the intermediate cache should compare the returned
validator with the one provided in the client's request, using the
strong comparison function. If the client's validator is equal to the
origin server's, then the intermediate cache simply returns 304 (Not
Modified). Otherwise, it returns the new entity with a 200 (OK)
response.
If a request includes the no-cache directive, it should not include min-fresh, min-
fresh, max-stale, or max-age.
In some cases, such as times of extremely poor network connectivity, a
client may want a cache to return only those responses that it currently
has stored, and not to reload or revalidate with the origin server. To
do this, the client may include the only-if-cached directive in a
request. If it receives this directive, a cache SHOULD either respond
using a cached entry that is consistent with the other constraints of the request,
Fielding, et al [Page 106]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
the request, or respond with a 504 (Gateway Timeout) status. However, if
a group of caches is being operated as a unified system with good
internal connectivity, such a request MAY be forwarded within that group
of caches.
Because a cache may be configured to ignore a server's specified
expiration time, and because a client request may include a max-stale
directive (which has a similar effect),
Fielding, et al [Page 119]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 the protocol also includes a
mechanism for the origin server to require revalidation of a cache entry
on any subsequent use. When the must-revalidate directive is present in
a response received by a cache, that cache MUST NOT use the entry after
it becomes stale to respond to a subsequent request without first
revalidating it with the origin server. (I.e., the cache must do an end-to-end end-
to-end revalidation every time, if, based solely on the origin server's
Expires or max-age value, the cached response is stale.)
The must-revalidate directive is necessary to support reliable operation
for certain protocol features. In all circumstances an HTTP/1.1 cache
MUST obey the must-
revalidate must-revalidate directive; in particular, if the cache
cannot reach the origin server for any reason, it MUST generate a 504
(Gateway Timeout) response.
Servers should send the must-revalidate directive if and only if failure
to revalidate a request on the entity could result in incorrect
operation, such as a silently unexecuted financial transaction.
Recipients MUST NOT take any automated action that violates this
directive, and MUST NOT automatically provide an unvalidated copy of the
entity if revalidation fails.
Although this is not recommended, user agents operating under severe
connectivity constraints may violate this directive but, if so, MUST
explicitly warn the user that an unvalidated response has been provided.
The warning MUST be provided on each unvalidated access, and SHOULD
require explicit user confirmation.
The proxy-revalidate directive has the same meaning as the
must-revalidate must-
revalidate directive, except that it does not apply to non-shared user
agent caches. It can be used on a response to an authenticated request
to permit the user's cache to store and later return the response
without needing to revalidate it (since it has already been
authenticated once by that user), while still requiring proxies that
service many users to revalidate each time (in order to make sure that
each user has been authenticated). Note that such authenticated
responses also need the public cache control directive in order to allow
them to be cached at all.
14.9.5 No-Transform Directive
Implementers of intermediate caches (proxies) have found it useful to
convert the media type of certain entity bodies. A proxy might, for
Fielding, et al [Page 107]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
example, convert between image formats in order to save cache space or
to reduce the amount of traffic on a slow link. HTTP has to date been
silent on these transformations.
Fielding, et al [Page 120]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Serious operational problems have already occurred, however, when these
transformations have been applied to entity bodies intended for certain
kinds of applications. For example, applications for medical imaging,
scientific data analysis and those using end-to-end authentication, all
depend on receiving an entity body that is bit for bit identical to the
original entity-body.
Therefore, if a message includes the no-transform directive, an
intermediate cache or proxy MUST NOT change those headers that are
listed in section 13.5.2 as being subject to the no-transform directive.
This implies that the cache or proxy must not change any aspect of the
entity-body that is specified by these headers.
14.9.6 Cache Control Extensions
The Cache-Control header field can be extended through the use of one or
more cache-extension tokens, each with an optional assigned value.
Informational extensions (those which do not require a change in cache
behavior) may be added without changing the semantics of other
directives. Behavioral extensions are designed to work by acting as
modifiers to the existing base of cache directives. Both the new
directive and the standard directive are supplied, such that
applications which do not understand the new directive will default to
the behavior specified by the standard directive, and those that
understand the new directive will recognize it as modifying the
requirements associated with the standard directive. In this way,
extensions to the Cache-Control directives can be made without requiring
changes to the base protocol.
This extension mechanism depends on a HTTP cache obeying all of the
cache-control directives defined for its native HTTP-
version, HTTP-version, obeying
certain extensions, and ignoring all directives that it does not
understand.
For example, consider a hypothetical new response directive called
"community" which acts as a modifier to the "private" directive. We
define this new directive to mean that, in addition to any non-shared
cache, any cache which is shared only by members of the community named
within its value may cache the response. An origin server wishing to
allow the "UCI" community to use an otherwise private response in their
shared cache(s) may do so by including
Cache-Control: private, community="UCI"
A cache seeing this header field will act correctly even if the cache
does not understand the "community" cache-
extension, cache-extension, since it will also
Fielding, et al [Page 108]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
see and understand the "private" directive and thus default to the safe
behavior.
Fielding, et al [Page 121]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Unrecognized cache-directives MUST be ignored; it is assumed that any
cache-directive likely to be unrecognized by an HTTP/1.1 cache will be
combined with standard directives (or the response's default
cachability) such that the cache behavior will remain minimally correct
even if the cache does not understand the extension(s).
14.10 Connection
The Connection general-header field allows the sender to specify options
that are desired for that particular connection and MUST NOT be
communicated by proxies over further connections.
The Connection header has the following grammar:
Connection-header
Connection = "Connection" ":" 1#(connection-token)
connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a message
is forwarded and, for each connection-token in this field, remove any
header field(s) from the message with the same name as the connection-token. connection-
token. Connection options are signaled by the presence of a connection-token connection-
token in the Connection header field, not by any corresponding
additional header field(s), since the additional header field may not be
sent if there are no parameters associated with that connection option.
Message headers listed in the Connection header MUST NOT include end-to-end end-to-
end headers, such as Cache-Control.
HTTP/1.1 defines the "close" connection option for the sender to signal
that the connection will be closed after completion of the response. For
example,
Connection: close
in either the request or the response header fields indicates that the
connection should not be considered `persistent' (section 8.1) after the
current request/response is complete.
HTTP/1.1 applications that do not support persistent connections MUST
include the "close" connection option in every message.
A system receiving an HTTP/1.0 (or lower-version) message that includes
a Connection header MUST, for each connection-
token connection-token in this field,
remove and ignore any header field(s) from the message with the same
name as the connection-token.
Fielding, et al [Page 122]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 This protects against mistaken forwarding
of such header fields by pre-HTTP/1.1 proxies.
Fielding, et al [Page 109]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.11 Content-Base
The Content-Base entity-header field may be used to specify the base URI
for resolving relative URLs within the entity.
This header field is described as Base in RFC 1808[11],
which is expected to be revised.
Content-Base = "Content-Base" ":" absoluteURI
If no Content-Base field is present, the base URI of an entity is
defined either by its Content-Location (if that Content-Location URI is
an absolute URI) or the URI used to initiate the request, in that order
of precedence. Note, however, that the base URI of the contents within
the entity-body may be redefined within that entity-body.
14.12 Content-Encoding
The Content-Encoding entity-header field is used as a modifier to the
media-type. When present, its value indicates what additional content
codings have been applied to the entity-body, and thus what decoding
mechanisms MUST be applied in order to obtain the media-type referenced
by the Content-Type header field. Content-Encoding is primarily used to
allow a document to be compressed without losing the identity of its
underlying media type.
Content-Encoding = "Content-Encoding" ":" 1#content-coding
Content codings are defined in section 3.5. An example of its use is
Content-Encoding: gzip
The Content-Encoding is a characteristic of the entity identified by the
Request-URI. Typically, the entity-body is stored with this encoding and
is only decoded before rendering or analogous usage. However, a proxy
MAY modify the content-coding if the new coding is known to be
acceptable to the recipient, unless the "no-transform" Cache-Control
directive is present in the message.
If the content-coding of an entity is not "identity", then the response
MUST including a Content-Encoding entity-header (section 14.12) that
lists the non-identity content-
coding(s) content-coding(s) used.
Fielding, et al [Page 123]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
If the content-coding of an entity in a request message is not
acceptable to the origin server, the server SHOULD respond with a status
code of 415 (Unsupported Media Type).
If multiple encodings have been applied to an entity, the content
codings MUST be listed in the order in which they were applied.
Additional information about the encoding parameters MAY be provided by
other entity-header fields not defined by this specification.
Fielding, et al [Page 110]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.13 Content-Language
The Content-Language entity-header field describes the natural
language(s) of the intended audience for the enclosed entity. Note that
this may not be equivalent to all the languages used within the entity-body. entity-
body.
Content-Language = "Content-Language" ":" 1#language-tag
Language tags are defined in section Error! Reference source
not found.. 3.10. The primary purpose of
Content-Language is to allow a user to identify and differentiate
entities according to the user's own preferred language. Thus, if the
body content is intended only for a Danish-literate audience, the
appropriate field is
Content-Language: da
If no Content-Language is specified, the default is that the content is
intended for all language audiences. This may mean that the sender does
not consider it to be specific to any natural language, or that the
sender does not know for which language it is intended.
Multiple languages MAY be listed for content that is intended for
multiple audiences. For example, a rendition of the "Treaty of
Waitangi," presented simultaneously in the original Maori and English
versions, would call for
Content-Language: mi, en
However, just because multiple languages are present within an entity
does not mean that it is intended for multiple linguistic audiences. An
example would be a beginner's language primer, such as "A First Lesson
in Latin," which is clearly intended to be used by an English-literate
audience. In this case, the Content-Language should only include "en".
Content-Language may be applied to any media type -- it is not limited
to textual documents.
Fielding, et al [Page 124]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
14.14 Content-Length
The Content-Length entity-header field indicates the size of the
message-body, in decimal number of octets, OCTETs, sent to the recipient or, in
the case of the HEAD method, the size of the entity-body that would have
been sent had the request been a GET.
Content-Length = "Content-Length" ":" 1*DIGIT
An example is
Content-Length: 3495
Applications SHOULD use this field to indicate the size of the message-body message-
body to be transferred, regardless of the media type of the entity. It
must be possible for the recipient to reliably determine the end of
HTTP/1.1 requests containing an entity-body, e.g., because the request
Fielding, et al [Page 111]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
has a valid Content-Length field, uses Transfer-Encoding: chunked or a
multipart body.
Any Content-Length greater than or equal to zero is a valid value.
Section 4.4 describes how to determine the length of a message-body if a
Content-Length is not given.
Note: The meaning of this field is significantly different from the
corresponding definition in MIME, where it is an optional field
used within the "message/external-body" content-type. In HTTP, it
SHOULD be sent whenever the message's length can be determined
prior to being transferred.
14.15 Content-Location
The Content-Location entity-header field MAY be used to supply the
resource location for the entity enclosed in the message when that
entity is accessible from a location separate from the requested
resource's URI.. In the case where a resource has multiple entities
associated with it, and those entities actually have separate locations
by which they might be individually accessed, the server should provide
a Content-Location for the particular variant which is returned. In
addition, a server SHOULD provide a Content-
Location Content-Location for the resource
corresponding to the response entity.
Content-Location = "Content-Location" ":"
( absoluteURI | relativeURI )
If no Content-Base header field is present, the value of
Content-Location Content-
Location also defines the base URL for the entity (see section 14.11).
Fielding, et al [Page 125]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The Content-Location value is not a replacement for the original
requested URI; it is only a statement of the location of the resource
corresponding to this particular entity at the time of the request.
Future requests MAY use the Content-Location URI if the desire is to
identify the source of that particular entity.
A cache cannot assume that an entity with a Content-Location different
from the URI used to retrieve it can be used to respond to later
requests on that Content-Location URI. However, the Content-Location can
be used to differentiate between multiple entities retrieved from a
single requested resource, as described in section 13.6.
If the Content-Location is a relative URI, the URI is interpreted
relative to any Content-Base URI provided in the response. If no
Content-Base is provided, the relative URI is interpreted relative to
the Request-URI.
Fielding, et al [Page 112]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.16 Content-MD5
The Content-MD5 entity-header field, as defined in RFC 1864 [23], is an
MD5 digest of the entity-body for the purpose of providing an end-to-end
message integrity check (MIC) of the entity-body. (Note: a MIC is good
for detecting accidental modification of the entity-body in transit, but
is not proof against malicious attacks.)
Content-MD5 = "Content-MD5" ":" md5-digest
md5-digest = <base64 of 128 bit MD5 digest as per RFC 1864>
The Content-MD5 header field may be generated by an origin server to
function as an integrity check of the entity-body. Only origin servers
may generate the Content-MD5 header field; proxies and gateways MUST NOT
generate it, as this would defeat its value as an end-to-end integrity
check. Any recipient of the entity-body, including gateways and proxies,
MAY check that the digest value in this header field matches that of the
entity-body as received.
The MD5 digest is computed based on the content of the entity-body,
including any Content-Encoding that has been applied, but not including
any Transfer-Encoding that may have been applied to the message-body. If
the message is received with a Transfer-Encoding, that encoding must be
removed prior to checking the Content-MD5 value against the received
entity.
This has the result that the digest is computed on the octets of the
entity-body exactly as, and in the order that,
Fielding, et al [Page 126]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 they would be sent if no
Transfer-Encoding were being applied.
HTTP extends RFC 1864 to permit the digest to be computed for MIME
composite media-types (e.g., multipart/* and message/rfc822), but this
does not change how the digest is computed as defined in the preceding
paragraph.
Note: There are several consequences of this. The entity-body for
composite types may contain many body-
parts, body-parts, each with its own MIME
and HTTP headers (including Content-MD5, Content-Transfer-Encoding,
and Content-Encoding headers). If a body-part has a
Content-Transfer-Encoding Content-
Transfer-Encoding or Content-Encoding header, it is assumed that
the content of the body-part has had the encoding applied, and the
body-part is included in the Content-MD5 digest as is -- i.e.,
after the application. The Transfer-Encoding header field is not
allowed within body-parts.
Note: while the definition of Content-MD5 is exactly the same for
HTTP as in RFC 1864 for MIME entity-
bodies, entity-bodies, there are several ways
in which the application of Content-MD5 to HTTP entity-bodies
differs from its application to MIME entity-bodies. One is that
HTTP, unlike MIME, does not use Content-Transfer-Encoding, and does
use Transfer-Encoding and Content-Encoding. Another is that HTTP
more frequently uses binary content types than MIME, so it is worth
Fielding, et al [Page 113]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
noting that, in such cases, the byte order used to compute the
digest is the transmission byte order defined for the type. Lastly,
HTTP allows transmission of text types with any of several line
break conventions and not just the canonical form using CRLF.
Conversion of all line breaks to CRLF should not be done before
computing or checking the digest: the line break convention used in
the text actually transmitted should be left unaltered when
computing the digest.
14.17 Content-Range
Editor's note: Paul Leach is circulating changes that would
define how to do PUTs with byte ranges; the spec is
currently silent on the topic
The Content-Range entity-header is sent with a partial entity-body to
specify where in the full entity-body the partial body should be
inserted. It SHOULD indicate the total length of the full entity-body,
unless length this is unknown or difficult to determine.
Content-Range = "Content-Range" ":" content-range-spec
Fielding, et al [Page 127]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
content-range-spec = byte-content-range-spec | "*"
byte-content-range-spec = bytes-unit SP first-byte-pos "-"
last-byte-pos
byte-range-resp-spec "/"
( entity-length | "*" )
byte-range-resp-spec = (first-byte-pos "-" last-byte-pos)
| "*"
entity-length = 1*DIGIT
The asterisk "*" character means that the entity-length is unknown at
the time when the response was generated.
Unlike byte-ranges-specifier values, a byte-content-range-
spec byte-range-resp-spec may only
specify one range, and must contain absolute byte positions for both the
first and last byte of the range.
A byte-content-range-spec with a byte-range-resp-spec whose last-byte-pos last-byte-
pos value is less than its first-byte-pos value, or whose entity-length
value is less than or equal to its last-byte-pos value, is invalid. The
recipient of an invalid byte-content-range-spec MUST ignore it and any
content transferred along with it.
A server sending a response with status code 416 (Requested range not valid)
satisfiable) SHOULD include a Content-range field with a content-range-spec byte-range-
resp-spec of "*". The entity-length specifies the current length of the
selected resource. A response with status code 206 (Partial Content)
MUST NOT include a Content-range field with a content-range-spec of "*".
Examples of byte-content-range-spec values, assuming that the entity
contains a total of 1234 bytes:
. The first 500 bytes:
bytes 0-499/1234
. The second 500 bytes:
Fielding, et al [Page 114]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
bytes 500-999/1234
. All except for the first 500 bytes:
bytes 500-1233/1234
. The last 500 bytes:
bytes 734-1233/1234
When an HTTP message includes the content of a single range (for
example, a response to a request for a single range, or to a request for
a set of ranges that overlap without any holes), this content is
transmitted with a Content-Range header, and a Content-Length header
showing the number of bytes actually transferred. For example,
Fielding, et al [Page 128]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
HTTP/1.1 206 Partial content
Date: Wed, 15 Nov 1995 06:25:24 GMT
Last-modified: Wed, 15 Nov 1995 04:58:08 GMT
Content-Range: bytes 21010-47021/47022
Content-Length: 26012
Content-Type: image/gif
When an HTTP message includes the content of multiple ranges (for
example, a response to a request for multiple non-
overlapping non-overlapping ranges),
these are transmitted as a multipart MIME message. The multipart MIME
content-type used for this purpose is defined in this specification to
be "multipart/byteranges". See appendix 19.2 for its definition. See
appendix 19.8.3 for a compatibility issue.
A client that cannot decode a MIME multipart/byteranges message should
not ask for multiple byte-ranges in a single request.
When a client requests multiple byte-ranges in one request, the server
SHOULD return them in the order that they appeared in the request.
If the server ignores a byte-range-spec because it is syntactically
invalid, the server should treat the request as if the invalid Range
header field did not exist. (Normally, this means return a 200 response
containing the full entity).
If the server receives a request (other than one including an If-Range
request-header field) with an unsatisfiable Range request-header field
(that is, all of whose byte-
range-spec byte-range-spec values have a first-byte-pos
value greater than the current length of the selected resource), it
SHOULD return a response code of 416 (Requested range not valid) satisfiable)
(section 10.4.17).
Note: clients cannot depend on servers to send a 416 (Requested
range not valid) satisfiable) response instead of a 200 (OK) response for
an unsatisfiable Range request-
header, request-header, since not all servers
implement this request-
header. request-header.
Fielding, et al [Page 115]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.18 Content-Type
The Content-Type entity-header field indicates the media type of the
entity-body sent to the recipient or, in the case of the HEAD method,
the media type that would have been sent had the request been a GET.
Content-Type = "Content-Type" ":" media-type
Fielding, et al [Page 129]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Media types are defined in section 3.7. An example of the field is
Content-Type: text/html; charset=ISO-8859-4
Further discussion of methods for identifying the media type of an
entity is provided in section 7.2.1.
14.19 Date
The Date general-header field represents the date and time at which the
message was originated, having the same semantics as orig-date in RFC
822. The field value is an HTTP-date, as described in section 3.3.1; it
MUST be sent in RFC1123 [8]-date format.
Date = "Date" ":" HTTP-date
An example is
Date: Tue, 15 Nov 1994 08:12:31 GMT
Origin servers MUST include a Date header field in all responses, except
in these cases:
1.If
1. If the response status code is 100 (Continue) or 101 (Switching
Protocols), the response MAY include a Date header field, at the
server's option.
2.If
2. If the response status code conveys a server error, e.g. 500
(Internal Server Error) or 503 (Service Unavailable), and it is
inconvenient or impossible to generate a valid Date.
3.If
3. If the server does not have a clock that can provide a reasonable
approximation of the current time, its responses MUST NOT include a
Date header field. In this case, the rules in section 14.19.1 MUST
be followed.
A received message that does not have a Date header field MUST be
assigned one by the recipient if the message will be cached by that
recipient or gatewayed via a protocol which requires a Date. An HTTP
implementation without a clock MUST NOT cache responses without
revalidating them on every use. An HTTP cache, especially a shared
cache, SHOULD use a mechanism, such as NTP [28], to synchronize its
clock with a reliable external standard.
Clients SHOULD only send a Date header field in messages that include an
entity-body, as in the case of the PUT and POST requests, and even then it is optional. A client
Fielding, et al [Page 130] 116]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
it is optional. A client without a clock MUST NOT send a Date header
field in a request.
In theory, the date SHOULD represent the moment just before the entity
is generated. In practice, the date can be generated at any time during
the message origination without affecting its semantic value.
14.19.1 Clockless Origin Server Operation
Some origin server implementations may not have a clock available. An
origin server without a clock MUST NOT assign Expires or Last-Modified
values to a response, unless these values were associated with the
resource by a system or user with a reliable clock. It MAY assign an
Expires value that is known, at or before server configuration time, to
be in the past (this allows "pre-expiration" of responses without
storing separate Expires values for each resource).
14.20 ETag
The ETag entity-header field defines the entity tag for the associated
entity. The headers used with entity tags are described in sections
14.20, 14.25, 14.26 and 14.43. The entity tag may be used for comparison
with other entities from the same resource (see section 13.3.2). 13.2.3).
ETag = "ETag" ":" entity-tag
Examples:
ETag: "xyzzy"
ETag: W/"xyzzy"
ETag: ""
14.21 Expires
The Expires entity-header field gives the date/time after which the
response should be considered stale. A stale cache entry may not
normally be returned by a cache (either a proxy cache or an user agent
cache) unless it is first validated with the origin server (or with an
intermediate cache that has a fresh copy of the entity). See section
13.2 for further discussion of the expiration model.
The presence of an Expires field does not imply that the original
resource will change or cease to exist at, before, or after that time.
Fielding, et al [Page 131]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The format is an absolute date and time as defined by HTTP-
date HTTP-date in
section 3.3; it MUST be in RFC1123-date format:
Expires = "Expires" ":" HTTP-date
Fielding, et al [Page 117]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
An example of its use is
Expires: Thu, 01 Dec 1994 16:00:00 GMT
Note: if a response includes a Cache-Control field with the max-age
directive, that directive overrides the Expires field.
HTTP/1.1 clients and caches MUST treat other invalid date formats,
especially including the value "0", as in the past (i.e., "already
expired").
To mark a response as "already expired," an origin server should use an
Expires date that is equal to the Date header value. (See the rules for
expiration calculations in section 13.2.4.)
To mark a response as "never expires," an origin server should use an
Expires date approximately one year from the time the response is sent.
HTTP/1.1 servers should not send Expires dates more than one year in the
future.
The presence of an Expires header field with a date value of some time
in the future on an response that otherwise would by default be non-cacheable non-
cachable indicates that the response is cachable, unless indicated
otherwise by a Cache-Control header field (section 14.9).
14.22 From
The From request-header field, if given, SHOULD contain an Internet e-mail e-
mail address for the human user who controls the requesting user agent.
The address SHOULD be machine-usable, as defined by mailbox in RFC 822
[9] (as updated by RFC 1123 [8]):
From = "From" ":" mailbox
An example is:
From: webmaster@w3.org
This header field MAY be used for logging purposes and as a means for
identifying the source of invalid or unwanted requests. It SHOULD NOT be
used as an insecure form of access protection. The interpretation of
this field is that the request is being performed on behalf of the
person given, who accepts responsibility for the method performed.
Fielding, et al [Page 132]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 In
particular, robot agents SHOULD include this header so that the person
responsible for running the robot can be contacted if problems occur on
the receiving end.
The Internet e-mail address in this field MAY be separate from the
Internet host which issued the request. For example, when a request is
passed through a proxy the original issuer's address SHOULD be used.
Note: The client SHOULD not send the From header field without the
user's approval, as it may conflict with the user's privacy
Fielding, et al [Page 118]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
interests or their site's security policy. It is strongly
recommended that the user be able to disable, enable, and modify
the value of this field at any time prior to a request.
14.23 Host
Editor's note: not yet drafted is a change that would allow
a proxy to add a host header if not present, but not change
it if it is already present.
The Host request-header field specifies the Internet host and port
number of the resource being requested, as obtained from the original
URL given by the user or referring resource (generally an HTTP URL, as
described in section 3.2.2). The Host field value MUST represent the
network location of the origin server or gateway given by the original
URL. This allows the origin server or gateway to differentiate between
internally-ambiguous URLs, such as the root "/" URL of a server for
multiple host names on a single IP address.
Host = "Host" ":" host [ ":" port ] ; Section 3.2.2
A "host" without any trailing port information implies the default port
for the service requested (e.g., "80" for an HTTP URL). For example, a
request on the origin server for <http://www.w3.org/pub/WWW/> MUST
include:
GET /pub/WWW/ HTTP/1.1
Host: www.w3.org
A client MUST include a Host header field in all HTTP/1.1 request
messages on the Internet (i.e., on any message corresponding to a
request for a URL which includes an Internet host address for the
service being requested). If the Host field is not already present, an
HTTP/1.1 proxy MUST add a Host field to the request message prior to
forwarding it on the Internet. All Internet-based HTTP/1.1 servers MUST
respond with a 400 status code to any HTTP/1.1 request message which
lacks a Host header field.
Fielding, et al [Page 133]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
See sections 5.2 and 19.5.1 for other requirements relating to Host.
14.24 If-Modified-Since
Editor's Note: issue DATE-IF-MODIFIED this still needs some
advice to implementers that would suggest that an HTTP
client ought to act as if the If-Modified-Since headers that
it sends *for cache validation* are going to be interpreted
as "If-Modification-date-does-not-match-exactly".
The If-Modified-Since request-header field is used with the GET method
to make it conditional: if the requested variant has not been modified
since the time specified in this field, an entity will not be returned
from the server; instead, a 304 (not modified) response will be returned
without any message-body.
If-Modified-Since = "If-Modified-Since" ":" HTTP-date
An example of the field is:
If-Modified-Since: Sat, 29 Oct 1994 19:43:31 GMT
A GET method with an If-Modified-Since header and no Range header
requests that the identified entity be transferred only if it has been
Fielding, et al [Page 119]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
modified since the date given by the If-
Modified-Since If-Modified-Since header. The
algorithm for determining this includes the following cases:
a) If
a)If the request would normally result in anything other than a 200
(OK) status, or if the passed If-Modified-
Since If-Modified-Since date is invalid, the
response is exactly the same as for a normal GET. A date which is
later than the server's current time is invalid.
b) If
b)If the variant has been modified since the If-Modified-
Since If-Modified-Since date,
the response is exactly the same as for a normal GET.
c) If
c)If the variant has not been modified since a valid If-
Modified-Since If-Modified-Since
date, the server MUST return a 304 (Not Modified) response.
The purpose of this feature is to allow efficient updates of cached
information with a minimum amount of transaction overhead.
Fielding, et al [Page 134]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Note that the Range request-header field modifies the meaning of
If-Modified-Since; see section 14.36 for full details.
Note that If-Modified-Since times are interpreted by the server,
whose clock may not be synchronized with the client.
Note that if a client uses
Note: When handling an arbitrary date in the If-
Modified-Since If-Modified-Since header instead of a field, some servers
will use an exact date taken from the Last-
Modified header comparison function, rather than a less-than
function, for the same request, the client should be
aware of the fact that this date is interpreted deciding whether to send a 304 (Not Modified)
response. To get best results when sending an If-Modified-Since
header field for cache validation, clients should use the exact
date string received in a previous Last-Modified header field
whenever possible.
Note that if a client uses an arbitrary date in the If-Modified-Since
header instead of a date taken from the Last-Modified header for the
same request, the client should be aware of the fact that this date is
interpreted in the server's understanding of time. The client should
consider unsynchronized clocks and rounding problems due to the
different encodings of time between the client and server. This includes
the possibility of race conditions if the document has changed between
the time it was first requested and the If-Modified-Since date of a
subsequent request, and the possibility of clock-skew-related problems
if the If-
Modified-Since If-Modified-Since date is derived from the client's clock without
correction to the server's clock. Corrections for different time bases
between client and server are at best approximate due to network
latency.
Fielding, et al [Page 120]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.25 If-Match
The If-Match request-header field is used with a method to make it
conditional. A client that has one or more entities previously obtained
from the resource can verify that one of those entities is current by
including a list of their associated entity tags in the If-Match header
field. The purpose of this feature is to allow efficient updates of
cached information with a minimum amount of transaction overhead. It is
also used, on updating requests, to prevent inadvertent modification of
the wrong version of a resource. As a special case, the value "*"
matches any current entity of the resource.
If-Match = "If-Match" ":" ( "*" | 1#entity-tag )
If any of the entity tags match the entity tag of the entity that would
have been returned in the response to a similar GET request (without the
If-Match header) on that resource, or if "*" is given and any current
entity exists for that resource, then the server MAY perform the
requested method as if the If-Match header field did not exist.
A server MUST use the strong comparison function (see section 3.11) to
compare the entity tags in If-Match.
If none of the entity tags match, or if "*" is given and no current
entity exists, the server MUST NOT perform the requested method, and
MUST return a 412 (Precondition
Fielding, et al [Page 135]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 Failed) response. This behavior is most
useful when the client wants to prevent an updating method, such as PUT,
from modifying a resource that has changed since the client last
retrieved it.
If the request would, without the If-Match header field, result in
anything other than a 2xx status, then the If-
Match If-Match header MUST be
ignored.
The meaning of "If-Match: *" is that the method SHOULD be performed if
the representation selected by the origin server (or by a cache,
possibly using the Vary mechanism, see section 14.43) exists, and MUST
NOT be performed if the representation does not exist.
A request intended to update a resource (e.g., a PUT) MAY include an If-Match If-
Match header field to signal that the request method MUST NOT be applied
if the entity corresponding to the If-Match value (a single entity tag)
is no longer a representation of that resource. This allows the user to
indicate that they do not wish the request to be successful if the
resource has been changed without their knowledge. Examples:
If-Match: "xyzzy"
If-Match: "xyzzy", "r2d2xxxx", "c3piozzzz"
If-Match: *
Fielding, et al [Page 121]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.26 If-None-Match
The If-None-Match request-header field is used with a method to make it the
method conditional. A client that has one or more entities previously
obtained from the resource can verify that none of those entities is
current by including a list of their associated entity tags in the If-None-Match If-
None-Match header field. The purpose of this feature is to allow
efficient updates of cached information with a minimum amount of
transaction overhead. It is also used, on updating requests, used to prevent inadvertent modification of a method (e.g. PUT)
from inadvertently modifying an existing resource which was when the client
believes that the resource does not known to exist.
As a special case, the value "*" matches any current entity of the
resource.
If-None-Match = "If-None-Match" ":" ( "*" | 1#entity-
tag 1#entity-tag )
If any of the entity tags match the entity tag of the entity that would
have been returned in the response to a similar GET request (without the
If-None-Match header) on that resource, or if "*" is given and any
current entity exists for that resource, then the server MUST NOT
perform the requested method. method, unless required to do so because the
resource's modification date fails to match that supplied in an If-
Modified-Since header field in the request. Instead, if the request
method was GET or
Fielding, et al [Page 136]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 HEAD, the server SHOULD respond with a 304 (Not
Modified) response, including the cache-related entity-header fields
(particularly ETag) of one of the entities that matched. For all other
request methods, the server MUST respond with a status of 412
(Precondition Failed).
See section 13.3.3 for rules on how to determine if two entity tags
match. The weak comparison function can only be used with GET or HEAD
requests.
If none of the entity tags match, or then the server MAY perform the
requested method as if the If-None-Match header field did not exist, but
MUST also ignore any If-Modified-Since header field(s) in the request.
That is, if no entity tags match, then the server MUST not return a 304
(Not Modified) response.
If "*" is given and no current entity exists, then the server MAY
perform the requested method as if the If-None-Match header field did
not exist.
If the request would, without the If-None-Match header field, result in
anything other than a 2xx or 304 status, then the If-None-Match header
MUST be ignored. (See section 13.3.4 for a discussion of server behavior
when both If-Modified-Since and If-None-Match appear in the same
request.)
Fielding, et al [Page 122]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
The meaning of "If-None-Match: *" is that the method MUST NOT be
performed if the representation selected by the origin server (or by a
cache, possibly using the Vary mechanism, see section 14.43) exists, and
SHOULD be performed if the representation does not exist. This feature
may be useful in preventing races between PUT operations.
Examples:
If-None-Match: "xyzzy"
If-None-Match: W/"xyzzy"
If-None-Match: "xyzzy", "r2d2xxxx", "c3piozzzz"
If-None-Match: W/"xyzzy", W/"r2d2xxxx", W/"c3piozzzz"
If-None-Match: *
14.27 If-Range
If a client has a partial copy of an entity in its cache, and wishes to
have an up-to-date copy of the entire entity in its cache, it could use
the Range request-header with a conditional GET (using either or both of
If-Unmodified-Since and If-Match.) However, if the condition fails
because the entity has been modified, the client would then have to make
a second request to obtain the entire current entity-body.
The If-Range header allows a client to "short-circuit" the second
request. Informally, its meaning is `if the entity is unchanged, send me
the part(s) that I am missing; otherwise, send me the entire new
entity.'
If-Range = "If-Range" ":" ( entity-tag | HTTP-date )
If the client has no entity tag for an entity, but does have a Last-Modified Last-
Modified date, it may use that date in a If-Range
Fielding, et al [Page 137]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 header. (The server
can distinguish between a valid HTTP-
date HTTP-date and any form of entity-tag by
examining no more than two characters.) The If-Range header should only
be used together with a Range header, and must be ignored if the request
does not include a Range header, or if the server does not support the
sub-range operation.
If the entity tag given in the If-Range header matches the current
entity tag for the entity, then the server
SHOULDprovide SHOULD provide the specified
sub-range of the entity using a 206 (Partial content) response. If the
entity tag does not match, then the server SHOULDreturn SHOULD return the entire
entity using a 200 (OK) response.
14.28 If-Unmodified-Since
The If-Unmodified-Since request-header field is used with a method to
make it conditional. If the requested resource has not been modified
since the time specified in this field, the server should perform the
requested operation as if the If-Unmodified-Since header were not
present.
Fielding, et al [Page 123]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
If the requested variant has been modified since the specified time, the
server MUST NOT perform the requested operation, and MUST return a 412
(Precondition Failed).
If-Unmodified-Since = "If-Unmodified-Since" ":" HTTP-date
An example of the field is:
If-Unmodified-Since: Sat, 29 Oct 1994 19:43:31 GMT
If the request normally (i.e., without the If-Unmodified-
Since If-Unmodified-Since header)
would result in anything other than a 2xx status, the If-Unmodified-Since If-Unmodified-
Since header should be ignored.
If the specified date is invalid, the header is ignored.
14.29 Last-Modified
The Last-Modified entity-header field indicates the date and time at
which the origin server believes the variant was last modified.
Last-Modified = "Last-Modified" ":" HTTP-date
An example of its use is
Last-Modified: Tue, 15 Nov 1994 12:45:26 GMT
Fielding, et al [Page 138]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
The exact meaning of this header field depends on the implementation of
the origin server and the nature of the original resource. For files, it
may be just the file system last-modified time. For entities with
dynamically included parts, it may be the most recent of the set of
last-modify times for its component parts. For database gateways, it may
be the last-update time stamp of the record. For virtual objects, it may
be the last time the internal state changed.
An origin server MUST NOT send a Last-Modified date which is later than
the server's time of message origination. In such cases, where the
resource's last modification would indicate some time in the future, the
server MUST replace that date with the message origination date.
An origin server should obtain the Last-Modified value of the entity as
close as possible to the time that it generates the Date value of its
response. This allows a recipient to make an accurate assessment of the
entity's modification time, especially if the entity changes near the
time that the response is generated.
HTTP/1.1 servers SHOULD send Last-Modified whenever feasible.
14.30 Location
In RFC 2068, the Location header was used to indicate the
proxy setting. Its use is DEPRECATED by the Set-Proxy
header in the context of a 305 response. All new
implementations MUST send the Set-proxy header.
Implementations MAY send the Location header so as to allow
backward compatibility.
If the Location header is specified, it should contain a URI
of the proxy. If the Set-Proxy header is not specified, the
client should use this proxy for just one request, and only
for the originally requested exact URL.
The Location response-header field is used to redirect the recipient to
a location other than the Request-URI for completion of the request or
Fielding, et al [Page 124]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
identification of a new resource. For 201 (Created) responses, the
Location is that of the new resource which was created by the request.
For 3xx responses, the location SHOULD indicate the server's preferred
URL for automatic redirection to the resource. The field value consists
of a single absolute URL.
Location = "Location" ":" absoluteURI
An example is is:
Location: http://www.w3.org/pub/WWW/People.html
Fielding, et al [Page 139]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
Note: The Content-Location header field (section 14.15) differs
from Location in that the Content-Location identifies the original
location of the entity enclosed in the request. It is therefore
possible for a response to contain header fields for both Location
and Content-
Location. Content-Location. Also see section 13.10 for cache requirements
of some methods.
14.31 Max-Forwards
Editor's note: The OPTIONS changes would allow Max-Forward
with OPTIONS, not just with TRACE.
The Max-Forwards request-header field may be used with the TRACE method
(section 14.31) and OPTIONS (section 9.2) methods to limit the number of
proxies or gateways that can forward the request to the next inbound
server. This can be useful when the client is attempting to trace a
request chain which appears to be failing or looping in mid-chain.
Max-Forwards = "Max-Forwards" ":" 1*DIGIT
The Max-Forwards value is a decimal integer indicating the remaining
number of times this request message may be forwarded.
Each proxy or gateway recipient of a TRACE or OPTIONS request containing
a Max-Forwards header field SHOULD check and update its value prior to
forwarding the request. If the received value is zero (0), the recipient SHOULD
MUST NOT forward the request; instead, it SHOULD MUST respond as the final
recipient with a 200 (OK) response containing the received
request message as the response entity-body (as described in
section 9.8).
recipient. If the received Max-Forwards value is greater than zero, then
the forwarded message SHOULD MUST contain an updated Max-Forwards field with a
value decremented by one (1).
The Max-Forwards header field SHOULD MAY be ignored for all other methods
defined by this specification and for any extension methods for which it
is not explicitly referred to as part of that method definition.
14.32 Pragma
The Pragma general-header field is used to include
implementation-specific implementation-
specific directives that may apply to any recipient along the
request/response chain. All pragma directives specify optional behavior
from the viewpoint of the protocol; however, some systems MAY require
that behavior be consistent with the directives.
Fielding, et al [Page 140] 125]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
Pragma = "Pragma" ":" 1#pragma-directive
pragma-directive = "no-cache" | extension-pragma
extension-pragma = token [ "=" ( token | quoted-string ) ]
When the no-cache directive is present in a request message, an
application SHOULD forward the request toward the origin server even if
it has a cached copy of what is being requested. This pragma directive
has the same semantics as the no-cache cache-directive (see section
14.9) and is defined here for backwards compatibility with HTTP/1.0.
Clients SHOULD include both header fields when a no-cache request is
sent to a server not known to be HTTP/1.1 compliant.
Pragma directives MUST be passed through by a proxy or gateway
application, regardless of their significance to that application, since
the directives may be applicable to all recipients along the
request/response chain. It is not possible to specify a pragma for a
specific recipient; however, any pragma directive not relevant to a
recipient SHOULD be ignored by that recipient.
HTTP/1.1 clients SHOULD NOT send the Pragma request-header. HTTP/1.1
caches SHOULD treat "Pragma: no-cache" as if the client had sent "Cache-Control: "Cache-
Control: no-cache". No new Pragma directives will be defined in HTTP.
14.33 Proxy-Authenticate
The Proxy-Authenticate response-header field MUST be included as part of
a 407 (Proxy Authentication Required) response. The field value consists
of a challenge that indicates the authentication scheme and parameters
applicable to the proxy for this Request-URI.
Proxy-Authenticate = "Proxy-Authenticate" ":" challenge
The HTTP access authentication process is described in section 11.
Unlike WWW-Authenticate, the Proxy-Authenticate header field applies
only to the current connection and SHOULD NOT be passed on to downstream
clients. However, an intermediate proxy may need to obtain its own
credentials by requesting them from the downstream client, which in some
circumstances will appear as if the proxy is forwarding the
Proxy-Authenticate Proxy-
Authenticate header field.
Fielding, et al [Page 141]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
14.34 Proxy-Authorization
The Proxy-Authorization request-header field allows the client to
identify itself (or its user) to a proxy which requires authentication.
The Proxy-Authorization field value consists of credentials containing
the authentication information of the user agent for the proxy and/or
realm of the resource being requested.
Proxy-Authorization = "Proxy-Authorization" ":" credentials
The HTTP access authentication process is described in section 11.
Unlike Authorization, the Proxy-Authorization header field applies only
Fielding, et al [Page 126]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
to the next outbound proxy that demanded authentication using the Proxy-Authenticate Proxy-
Authenticate field. When multiple proxies are used in a chain, the Proxy-
Authorization
Proxy-Authorization header field is consumed by the first outbound proxy
that was expecting to receive credentials. A proxy MAY relay the
credentials from the client request to the next proxy if that is the
mechanism by which the proxies cooperatively authenticate a given
request.
14.35 Public
Editors
Editor's Note: The OPTIONS changes would cause possible
changes to Allow and/or Public for consistency with each
other and with section 9.2 (OPTIONS )
The Public response-header field lists the set of methods
supported by the server. The purpose of this field header here is
strictly to inform the recipient of the capabilities of the
server regarding unusual methods. The methods listed may or
may not be applicable left so as to preserve the Request-URI; the Allow header
field (section 14.7) MAY be used to indicate methods allowed
for a particular URI.
Public = "Public" ":" 1#method
Example
numbering of use:
Public: OPTIONS, MGET, MHEAD, GET, HEAD
This header field applies only to the server directly
connected to the client (i.e., the nearest neighbor sections in a
chain of connections). If the response passes through a
proxy, the proxy MUST either remove section 14; the Public header field
or replace it with one applicable to its own capabilities.
Fielding, et al [Page 142]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 next draft will have delete
this placeholder and will reorganize some material.
14.36 Range
14.36.1 Byte Ranges
Since all HTTP entities are represented in HTTP messages as sequences of
bytes, the concept of a byte range is meaningful for any HTTP entity.
(However, not all clients and servers need to support byte-range
operations.)
Byte range specifications in HTTP apply to the sequence of bytes in the
entity-body (not necessarily the same as the message-body).
A byte range operation may specify a single range of bytes, or a set of
ranges within a single entity.
ranges-specifier = byte-ranges-specifier
byte-ranges-specifier = bytes-unit "=" byte-range-set
byte-range-set = 1#( byte-range-spec | suffix-byte-range-spec )
byte-range-spec = first-byte-pos "-" [last-byte-pos]
first-byte-pos = 1*DIGIT
last-byte-pos = 1*DIGIT
The first-byte-pos value in a byte-range-spec gives the byte-offset of
the first byte in a range. The last-byte-pos value gives the byte-offset
of the last byte in the range; that is, the byte positions specified are
inclusive. Byte offsets start at zero.
If the last-byte-pos value is present, it must be greater than or equal
to the first-byte-pos in that byte-range-spec, or the byte-range-spec is
syntactically invalid. The recipient of an a byte-range-set that includes
one or more syntactically invalid byte-range-spec must values MUST ignore it.
the header field that includes that byte-range-set.
If the last-byte-pos value is absent, or if the value is greater than or
equal to the current length of the entity-
body, entity-body, last-byte-pos is taken
Fielding, et al [Page 127]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
to be equal to one less than the current length of the entity-body in
bytes.
By its choice of last-byte-pos, a client can limit the number of bytes
retrieved without knowing the size of the entity.
suffix-byte-range-spec = "-" suffix-length
suffix-length = 1*DIGIT
Fielding, et al [Page 143]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997
A suffix-byte-range-spec is used to specify the suffix of the entity-body, entity-
body, of a length given by the suffix-length value. (That is, this form
specifies the last N bytes of an entity-body.) If the entity is shorter
than the specified suffix-length, the entire entity-body is used.
If a syntactically valid byte-range-set includes at least one byte-
range-spec whose first-byte-pos is less than the current length of the
entity-body, or at least one suffix-byte-range-spec with a non-zero
suffix-length, then the byte-range-set is satisfiable. Otherwise, the
byte-range-set is unsatisfiable. If the byte-range-set is unsatisfiable,
the server SHOULD return a response with a status of 416 (Requested
range not satisfiable). Otherwise, the server SHOULD return a response
with a status of 206 (Partial Content) containing the satisfiable ranges
of the entity-body.
Examples of byte-ranges-specifier values (assuming an entity-body of
length 10000):
. The first 500 bytes (byte offsets 0-499, inclusive):
bytes=0-499
. The second 500 bytes (byte offsets 500-999, inclusive):
bytes=500-999
. The final 500 bytes (byte offsets 9500-9999, inclusive):
bytes=-500
. Or
bytes=9500-
. The first and last bytes only (bytes 0 and 9999):
bytes=0-0,-1
. Several legal but not canonical specifications of the second 500
bytes (byte offsets 500-999, inclusive):
bytes=500-600,601-999
bytes=500-700,601-999
14.36.2 Range Retrieval Requests
HTTP retrieval requests using conditional or unconditional GET methods
may request one or more sub-ranges of the entity, instead of the entire
entity, using the Range request header, which applies to the entity
returned as the result of the request:
Range = "Range" ":" ranges-specifier
A server MAY ignore the Range header. However, HTTP/1.1 origin servers
and intermediate caches SHOULD should support byte ranges when possible, since
Fielding, et al [Page 128]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
Range supports efficient recovery from partially failed transfers, and
supports efficient partial retrieval of large entities.
If the server supports the Range header and the specified range or
ranges are appropriate for the entity:
. The presence of a Range header in an unconditional GET modifies
what is returned if the GET is otherwise successful. In other
words, the response carries a
Fielding, et al [Page 144]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 status code of 206 (Partial Content)
instead of 200 (OK).
. The presence of a Range header in a conditional GET (a request
using one or both of If-Modified-Since and If-
None-Match, If-None-Match, or one or
both of If-Unmodified-Since and If-Match) modifies what is returned
if the GET is otherwise successful and the condition is true. It
does not affect the 304 (Not Modified) response returned if the
conditional is false.
In some cases, it may be more appropriate to use the If-
Range If-Range header
(see section 14.27) in addition to the Range header.
If a proxy that supports ranges receives a Range request, forwards the
request to an inbound server, and receives an entire entity in reply, it
SHOULD only return the requested range to its client. It SHOULD store
the entire received response in its cache, if that is consistent with
its cache allocation policies.
14.37 Referer
The Referer[sic] request-header field allows the client to specify, for
the server's benefit, the address (URI) of the resource from which the
Request-URI was obtained (the "referrer", although the header field is
misspelled.) The Referer request-header allows a server to generate
lists of back-links to resources for interest, logging, optimized
caching, etc. It also allows obsolete or mistyped links to be traced for
maintenance. The Referer field MUST NOT be sent if the Request-URI was
obtained from a source that does not have its own URI, such as input
from the user keyboard.
Referer = "Referer" ":" ( absoluteURI | relativeURI )
Example:
Referer: http://www.w3.org/hypertext/DataSources/Overview.html
If the field value is a partial URI, it SHOULD be interpreted relative
to the Request-URI. The URI MUST NOT include a fragment.See section 15.11
15.10 for security considerations.
Fielding, et al [Page 129]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
14.38 Retry-After
The Retry-After response-header field can be used with a 503 (Service
Unavailable) response to indicate how long the
Fielding, et al [Page 145]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 service is expected to be
unavailable to the requesting client. This field MAY also be used with
any 3xx (Redirection) response to indicate the minimum time the
user-agent user-
agent should wait before issuing the redirected request. The value of
this field can be either an HTTP-date or an integer number of seconds
(in decimal) after the time of the response.
Retry-After = "Retry-After" ":" ( HTTP-date | delta-seconds )
Two examples of its use are
Retry-After: Fri, 31 Dec 1999 23:59:59 GMT
Retry-After: 120
In the latter example, the delay is 2 minutes.
14.39 Server
The Server response-header field contains information about the software
used by the origin server to handle the request. The field can contain
multiple product tokens (section 3.8) and comments identifying the
server and any significant subproducts. The product tokens are listed in
order of their significance for identifying the application.
Server = "Server" ":" 1*( product | comment )
Example:
Server: CERN/3.0 libwww/2.17
If the response is being forwarded through a proxy, the proxy
application MUST NOT modify the Server response-
header. response-header. Instead, it
SHOULD include a Via field (as described in section 14.44).
Note: Revealing the specific software version of the server may
allow the server machine to become more vulnerable to attacks
against software that is known to contain security holes. Server
implementers are encouraged to make this field a configurable
option.
14.40 Transfer-Encoding
The Transfer-Encoding general-header field indicates what (if any) type
of transformation has been applied to the message body in order to
safely transfer it between the sender and the recipient. This differs
from the Content-
Encoding Content-Encoding in that the transfer coding is a property of
the message, not of the entity.
Transfer-Encoding = "Transfer-Encoding" ":" 1#transfer-
coding
Fielding, et al [Page 146] 130]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, Friday, November 21, 1997
Transfer-Encoding = "Transfer-Encoding" ":"
1#transfer-coding
Transfer codings are defined in section 3.6. An example is:
Transfer-Encoding: chunked
If multiple encodings have been applied to an entity, the transfer
codings MUST be listed in the order in which they were applied.
Additional information about the encoding parameters MAY be provided by
other entity-header fields not defined by this specification.
Many older HTTP/1.0 applications do not understand the Transfer-Encoding
header.
14.41 Upgrade
The Upgrade general-header allows the client to specify what additional
communication protocols it supports and would like to use if the server
finds it appropriate to switch protocols. The server MUST use the
Upgrade header field within a 101 (Switching Protocols) response to
indicate which protocol(s) are being switched.
Upgrade = "Upgrade" ":" 1#product
For example,
Upgrade: HTTP/2.0, SHTTP/1.3, IRC/6.9, RTA/x11
The Upgrade header field is intended to provide a simple mechanism for
transition from HTTP/1.1 to some other, incompatible protocol. It does
so by allowing the client to advertise its desire to use another
protocol, such as a later version of HTTP with a higher major version
number, even though the current request has been made using HTTP/1.1.
This eases the difficult transition between incompatible protocols by
allowing the client to initiate a request in the more commonly supported
protocol while indicating to the server that it would like to use a
"better" protocol if available (where "better" is determined by the
server, possibly according to the nature of the method and/or resource
being requested).
The Upgrade header field only applies to switching application-layer
protocols upon the existing transport-
layer transport-layer connection. Upgrade cannot
be used to insist on a protocol change; its acceptance and use by the
server is optional. The capabilities and nature of the application-
layer application-layer
communication after the protocol change is entirely dependent upon the
new protocol chosen, although the first
Fielding, et al [Page 147]
INTERNET-DRAFT HTTP/1.1 Wednesday, July 30, 1997 action after changing the
protocol MUST be a response to the initial HTTP request containing the
Upgrade header field.
The Upgrade header field only applies to the immediate connection.
Therefore, the upgrade keyword MUST be supplied within a Connection
header field (section 14.10) whenever Upgrade is present in an HTTP/1.1
message.
Fielding, et al [Page 131]
INTERNET-DRAFT HTTP/1.1 Friday, November 21, 1997
The Upgrade header field cannot be used to indicate a switch to a
protocol on a different connection. For that purpose, it is more
appropriate to use a 301, 302, 303, or 305 redirection response.
This specification only defines the protocol name "HTTP" for use by the
family of Hypertext Transfer Protocols, as defined by the HTTP version
rules of section 3.1 and future updates to this specification. Any token
can be used as a protocol name; however, it will only be useful if both
the client and server associate the name with the same protocol.
14.42 User-Agent
The User-Agent request-header field contains information about the user
agent originating the request. This is for statistical purposes, the
tracing of protocol violations, and automated recognition of user agents
for the sake of tailoring responses to avoid particular user agent
limitations. User agents SHOULD include this field with requests. The
field can contain multiple product tokens (section 3.8) and comments
identifying the agent and any subproducts which form a significant part
of the user agent. By convention, the product tokens are listed in order
of their significance for identifying the application.
User-Agent = "User-Agent" ":" 1*( product | comment )
Example:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3
14.43 Vary
Editors Note: Henrik Frystyk has drafted language to fix an
editorial problem (VARY) around Vary.
The Vary field value indicates the set of request-header fields that
fully determines, while the response is really fresh, whether a cache
advice. The description varies throughout may use
the spec. Time
did not permit me response to reply to incorporate a final version of these
changes.
The subsequent request without revalidation. For
uncachable or stale responses, the Vary response-header field is used by a server to signal
that value advises the